Intel 875P Chipset , v.Version 5.0.1.1015, A01
INSTALATE AUTOMAT Acest fișier a fost instalat automat ca parte a unei actualizări recente. Dacă întâmpinați orice probleme, puteți descărca și reinstala manual.Conținutul acestei pagini este posibil să fi fost tradus automat. Pentru a furniza feedback, completați formularul din partea de jos a paginii.
The Intel(R) Chipset Software Installation Utility installs
to the target system the Windows* INF files that outline to
the operating system how the Intel(R) chipset components will
be configured.
to the target system the Windows* INF files that outline to
the operating system how the Intel(R) chipset components will
be configured.
Recomandate
Găsiți cea mai bună descărcare pentru sistemul dvs.
Introduceți detaliile produsului pentru a vedea cele mai recente informații despre driverele sistemului dvs.Asistență căutare
Introduceți eticheta de service Dell sau modelul
Doriți să vă căutați produsul? Introduceți un identificator de produs. Arătați-mi cum
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Conectați-vă la Windows ca administrator pentru a utiliza scanarea automată. Dacă sunteți deja conectat ca administrator și vedeți acest mesaj, reporniți sistemul. Sistemul dvs. este gestionat de către administratorul IT, iar caracteristicile pot fi limitate.
Găsiți mai multe actualizări. Utilizați SupportAssist pentru a găsi cele mai recente actualizări ale driverelor pentru dispozitivul dvs.
Fixes & Enhancements
This version also supports Windows Server 2003.
Citiți mai multeVersiune
Version 5.0.1.1015, A01
Data lansării:
02 iul. 2003
Tip de descărcare
Driver
Categorie
Chipset
Importanță
OptionalDell Technologies recommends reviewing this update to determine if it applies to your system. The update contains changes that impact only certain configurations or provides new features that may or may not apply to your environment.
Formate disponibile View Important Information
Format fișier Extrage fișiere direct pe discul local
Nume fișier: PE400scA01.exe
Dimensiune fișier: 1.69 MB
Acesta este un fișier mare. În funcție de viteza conexiunii, descărcarea poate dura mai mult timp.
Descriere format:
This file format consists of an archive of files that may be decompressed to a directory on the hard drive. The installation can then be done from that directory.
Pentru a asigura integritatea descărcării, verificați valoarea cifrei de control.
MD5:
Not available
SHA1:
Not available
SHA-256:
Not available
Prin descărcare, acceptați termenii Dell Software License Agreement.
Informații importante
Important Note:
The Intel(R) Chipset Software Installation Utility is
distributed in two formats -- self extracting .EXE files
(INFINST_xxx.EXE) or compressed .ZIP files (INFINST_xxx.ZIP).
Depending on which distribution format is being executed,
the command-line syntax may differ. See Section 4 for more details.
The Intel(R) Chipset Software Installation Utility is
distributed in two formats -- self extracting .EXE files
(INFINST_xxx.EXE) or compressed .ZIP files (INFINST_xxx.ZIP).
Depending on which distribution format is being executed,
the command-line syntax may differ. See Section 4 for more details.
Sisteme de operare acceptate
Windows Server 2003
Windows 2000
Instrucțiuni de instalare
Custom Instructions for PE400scA01.exe:
These files are provided as a Self-Extracting archive.
To download:
1. Click the "Download Now" link to download the file.
2. If the Export Compliance Disclaimer window appears, click the "I agree" link to accept the agreement.
3. When the File Download window appears, click "Save" to save the file to your hard drive.
To extract files:
1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package.
2. Specify the folder on your hard drive to upzip the files.
3. Click on the unzip button to extract files.
Installation
For additional information refer to the readme.txt file within the release
************************************************************
* 6. INSTALLING THE SOFTWARE IN INTERACTIVE MODE
************************************************************
1. Verify that all system requirements have been met as
described in section 2.
2. Run the InstallShield* installation program:
Self-extracting .EXE distribution: INFINST_xxx.EXE
Compressed .ZIP distribution: SETUP.EXE
3. You will be prompted to agree to the license agreement.
If you do not agree, the Installer will exit before
extracting any files.
4. Follow the on-screen instructions and use the default
settings to complete the setup, once the operating
system has rebooted.
5. This completes the installation of the Intel(R) Chipset
Software Installation Utility.
************************************************************
* 7. INSTALLING THE SOFTWARE IN SILENT MODE
************************************************************
1. Verify that all system requirements have been met as
described in section 2.
2. Run the InstallShield* installation program:
For silent install with auto-reboot:
Self-extracting .EXE distribution:
INFINST_xxx.EXE -a -b -s
Compressed .ZIP distribution:
SETUP.EXE -b -s
- OR -
For silent install without auto-reboot:
Self-extracting .EXE distribution:
INFINST_xxx.EXE -a -s
Compressed .ZIP distribution: SETUP.EXE -s
3. The utility will perform the necessary updates and
record the installation status in the following system
registry key:
HKEY_LOCAL_MACHINE\Software\Intel\INFInst
4. If the utility was invoked with the "-b" flag, the
system will automatically reboot if the update was
successful.
NOTE: The system MUST be rebooted for all device
updates to take effect.
5. To determine whether the install was successful, verify
the "install" value in the registry key specified in
Step 3.
6. In Silent Mode the utility will not display the license
agreement. When using Silent Mode the license agreement,
license.txt, will be placed in the following folder:
Program Files/Intel/INFInst folder.
Please read this agreement.
These files are provided as a Self-Extracting archive.
To download:
1. Click the "Download Now" link to download the file.
2. If the Export Compliance Disclaimer window appears, click the "I agree" link to accept the agreement.
3. When the File Download window appears, click "Save" to save the file to your hard drive.
To extract files:
1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package.
2. Specify the folder on your hard drive to upzip the files.
3. Click on the unzip button to extract files.
Installation
For additional information refer to the readme.txt file within the release
************************************************************
* 6. INSTALLING THE SOFTWARE IN INTERACTIVE MODE
************************************************************
1. Verify that all system requirements have been met as
described in section 2.
2. Run the InstallShield* installation program:
Self-extracting .EXE distribution: INFINST_xxx.EXE
Compressed .ZIP distribution: SETUP.EXE
3. You will be prompted to agree to the license agreement.
If you do not agree, the Installer will exit before
extracting any files.
4. Follow the on-screen instructions and use the default
settings to complete the setup, once the operating
system has rebooted.
5. This completes the installation of the Intel(R) Chipset
Software Installation Utility.
************************************************************
* 7. INSTALLING THE SOFTWARE IN SILENT MODE
************************************************************
1. Verify that all system requirements have been met as
described in section 2.
2. Run the InstallShield* installation program:
For silent install with auto-reboot:
Self-extracting .EXE distribution:
INFINST_xxx.EXE -a -b -s
Compressed .ZIP distribution:
SETUP.EXE -b -s
- OR -
For silent install without auto-reboot:
Self-extracting .EXE distribution:
INFINST_xxx.EXE -a -s
Compressed .ZIP distribution: SETUP.EXE -s
3. The utility will perform the necessary updates and
record the installation status in the following system
registry key:
HKEY_LOCAL_MACHINE\Software\Intel\INFInst
4. If the utility was invoked with the "-b" flag, the
system will automatically reboot if the update was
successful.
NOTE: The system MUST be rebooted for all device
updates to take effect.
5. To determine whether the install was successful, verify
the "install" value in the registry key specified in
Step 3.
6. In Silent Mode the utility will not display the license
agreement. When using Silent Mode the license agreement,
license.txt, will be placed in the following folder:
Program Files/Intel/INFInst folder.
Please read this agreement.
Ajutor și tutoriale pentru drivere
Pentru mai multe descărcări, accesați Drivere și descărcări. Pentru ajutor privind utilizarea informațiilor de pe această pagină, accesați Tutoriale și ajutor pentru drivere.