Seagate SAS ST9146752SS firmware version HTF6.
INSTALATE AUTOMAT Acest fișier a fost instalat automat ca parte a unei actualizări recente. Dacă întâmpinați orice probleme, puteți descărca și reinstala manual.Conținutul acestei pagini este posibil să fi fost tradus automat. Pentru a furniza feedback, completați formularul din partea de jos a paginii.
This release contains firmware version HTF6 (FIPS140/SED Enabled) for Seagate SAS (15K rpm 2.5" SAS, SED) 146GB Hard Drives. Vendor model numbers ST9146752SS.
Recomandate
Găsiți cea mai bună descărcare pentru sistemul dvs.
Introduceți detaliile produsului pentru a vedea cele mai recente informații despre driverele sistemului dvs.Asistență căutare
Introduceți eticheta de service Dell sau modelul
Doriți să vă căutați produsul? Introduceți un identificator de produs. Arătați-mi cum
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Conectați-vă la Windows ca administrator pentru a utiliza scanarea automată. Dacă sunteți deja conectat ca administrator și vedeți acest mesaj, reporniți sistemul. Sistemul dvs. este gestionat de către administratorul IT, iar caracteristicile pot fi limitate.
Găsiți mai multe actualizări. Utilizați SupportAssist pentru a găsi cele mai recente actualizări ale driverelor pentru dispozitivul dvs.
Fixes & Enhancements
Fixes / Enchancements:
- Fixed issue when hard reset occurred on port other than which data transfer was taking place
- Improved error handling when Notify Power Loss Expected sequence is initiated
- Improved performance of write operations in extreme temperature environments.
- Improved drive error handling
- Improved long term reliability of drive.
- Improved performance related to SED commands
Citiți mai multe- Fixed issue when hard reset occurred on port other than which data transfer was taking place
- Improved error handling when Notify Power Loss Expected sequence is initiated
- Improved performance of write operations in extreme temperature environments.
- Improved drive error handling
- Improved long term reliability of drive.
- Improved performance related to SED commands
Versiune
HTF6, A01
Data lansării:
14 mai 2012
Tip de descărcare
Firmware
Categorie
Unitate SAS
Importanță
UrgentDell Technologies highly recommends applying this important update as soon as possible. The update contains critical bug fixes and changes to improve functionality, reliability, and stability of your Dell system. It may also include security fixes and other feature enhancements.
Formate disponibile View Important Information
Format fișier Actualizați pachetul pentru MS Windows pe 32 de biți
Nume fișier: SAS-Drive_Firmware_VP540_WN32_HTF6_A01.EXE
Dimensiune fișier: 11.24 MB
Acesta este un fișier mare. În funcție de viteza conexiunii, descărcarea poate dura mai mult timp.
Descriere format:
Dell Update Packages (DUP) in Microsoft Windows 32bit format have been designed to run on Microsoft Windows 64bit Operating Systems. Dell Update Packages (DUP) in Microsoft Windows 64bit format will only run on Microsoft Windows 64bit Operating Systems. When selecting a device driver update be sure to select the one that is appropriate for your operating system.
Pentru a asigura integritatea descărcării, verificați valoarea cifrei de control.
MD5:
f82cdd976374df3ce5ce2b6c0b03bf5f
SHA1:
41caeeca6561d4548a1891c2bdf3921eb1b4273c
SHA-256:
d01e5c5e6588c81397ef53d2ad971f6bf03ecebd6a7f8d54ddb064cd8bab37f7
Format fișier A GnuPG file which contains a cryptographic signature
Nume fișier: SAS-Drive_Firmware_VP540_LN32_HTF6_A01.BIN.sign
Dimensiune fișier: 189 Bytes
Acesta este un fișier mare. În funcție de viteza conexiunii, descărcarea poate dura mai mult timp.
Descriere format:
The GnuPG signature for Red Hat Linux Update Package can be used to authenticate Dell's identity in the correlated Red Hat Linux Update Package.
Pentru a asigura integritatea descărcării, verificați valoarea cifrei de control.
MD5:
dae13324cc5bf48398d7e578a798c27a
SHA1:
d34cf621632bb604760934e25e57cdfb8ec7d5b7
SHA-256:
4468438b26c89705795c727934377dca700f59363726f12c9b54de81daef7a3e
Format fișier Update Package for Red Hat Linux
Nume fișier: SAS-Drive_Firmware_VP540_LN32_HTF6_A01.BIN
Dimensiune fișier: 9.97 MB
Acesta este un fișier mare. În funcție de viteza conexiunii, descărcarea poate dura mai mult timp.
Descriere format:
Dell Update Packages for Linux can be used as stand-alone applications that ensure that specific validation criteria are met, then apply an update.
Note: Update Packages for Linux are open source. See the Dell Update Packages for Linux Readme for details.
Note: Update Packages for Linux are open source. See the Dell Update Packages for Linux Readme for details.
Pentru a asigura integritatea descărcării, verificați valoarea cifrei de control.
MD5:
7b5294438afed3f6c5ed2e5d45b51345
SHA1:
9fe67baaedf5181a869051cc31b1496aada28323
SHA-256:
9059db0edebc5fd5521eae70aa363ac66172a2fd535a493fd510542f7620bc13
Prin descărcare, acceptați termenii Dell Software License Agreement.
Informații importante
Important Information - External:
This update will not run if any of the following conditions exist
1. Any Virtual Disk that is not optimal.
2. A RAID container that is performing a Background Initialization or Consistency Check.
3. A Rebuild, Resync, or copyback function is taking place.
4. A RAID set that is Partially Degraded or in a Degraded state.
This update will run on drives remaining in a RAID set that is in a Offline state.
There is an architectural constraint with Dell DUP HDD firmware update utility, related to system memory utilization, which is typically encountered on systems with minimal system memory, memory-intensive configurations, multiple RAID controllers, or memory-intensive applications. This issue is typically reported as - The operation was not successful because the device buffer write has failed. And will result in an aborted attempt to update firmware on the identified HDD. Error codes associated with this failure mode include 8009 and 8017. Once an error is detected, the update session is aborted. There is no data integrity or data availability risk associated with this issue. Subsequent attempts to update the HDD firmware may succeed, particularly if system resources are freed up.
This update will not run if any of the following conditions exist
1. Any Virtual Disk that is not optimal.
2. A RAID container that is performing a Background Initialization or Consistency Check.
3. A Rebuild, Resync, or copyback function is taking place.
4. A RAID set that is Partially Degraded or in a Degraded state.
This update will run on drives remaining in a RAID set that is in a Offline state.
There is an architectural constraint with Dell DUP HDD firmware update utility, related to system memory utilization, which is typically encountered on systems with minimal system memory, memory-intensive configurations, multiple RAID controllers, or memory-intensive applications. This issue is typically reported as - The operation was not successful because the device buffer write has failed. And will result in an aborted attempt to update firmware on the identified HDD. Error codes associated with this failure mode include 8009 and 8017. Once an error is detected, the update session is aborted. There is no data integrity or data availability risk associated with this issue. Subsequent attempts to update the HDD firmware may succeed, particularly if system resources are freed up.
Sisteme de operare acceptate
Novell SuSE Linux ES 11
Windows Server 2008 x64
Red Hat® Ent Linux 4.5
Red Hat® Ent Linux 4.6
SuSE Linux ES 9
Suse Linux ES 9
Suse Linux ES 10
Red Hat® Enterprise Linux 4.5
Red Hat® Ent Linux 4.7
Red Hat® Ent Linux 5.2
Red Hat® Enterprise Linux 6
Red Hat® Ent Linux 5
Novell SuSE Linux ES 10
Windows Server 2008 x86
Windows Server 2003
Windows Server 2008 R2
Windows Server 2003 x64
Se aplică pentru
HD,146,SAS6,15K,2.5,SGT,HORNET FIPS140-SED
Instrucțiuni de instalare
Dell Update Package Instructions:
Download
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.
Download
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.
Ajutor și tutoriale pentru drivere
Pentru mai multe descărcări, accesați Drivere și descărcări. Pentru ajutor privind utilizarea informațiilor de pe această pagină, accesați Tutoriale și ajutor pentru drivere.