Micron RealSSD C400 128GB/256GB/512GB 2.5" 7MM Firmware Update
Este necesară repornirea INSTALATE AUTOMAT Acest fișier a fost instalat automat ca parte a unei actualizări recente. Dacă întâmpinați orice probleme, puteți descărca și reinstala manual.Conținutul acestei pagini este posibil să fi fost tradus automat. Pentru a furniza feedback, completați formularul din partea de jos a paginii.
This package provides the Micron RealSSD C400 128GB/256GB/512GB 2.5" 7MM Firmware Update and is supported on Alienware, Inspiron, Latitude, XPS Notebook, OptiPlex, Precision and Vostro Notebook models that are running the following Windows Operating Systems: Windows 7 and Windows 8.
Recomandate
Găsiți cea mai bună descărcare pentru sistemul dvs.
Introduceți detaliile produsului pentru a vedea cele mai recente informații despre driverele sistemului dvs.Asistență căutare
Introduceți eticheta de service Dell sau modelul
Doriți să vă căutați produsul? Introduceți un identificator de produs. Arătați-mi cum
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Conectați-vă la Windows ca administrator pentru a utiliza scanarea automată. Dacă sunteți deja conectat ca administrator și vedeți acest mesaj, reporniți sistemul. Sistemul dvs. este gestionat de către administratorul IT, iar caracteristicile pot fi limitate.
Găsiți mai multe actualizări. Utilizați SupportAssist pentru a găsi cele mai recente actualizări ale driverelor pentru dispozitivul dvs.
Fixes & Enhancements
Fixes
- Fixed issues where SSD may not be detected after a previous forced power cycle.
Enhancements
- Enhanced the device ready time, allowing system to be able to power up quickly.
Citiți mai multe- Fixed issues where SSD may not be detected after a previous forced power cycle.
Enhancements
- Enhanced the device ready time, allowing system to be able to power up quickly.
Versiune
040H, A00-00
Data lansării:
04 mar. 2013
Tip de descărcare
Firmware
Categorie
Soluții de stocare
Importanță
OptionalDell Technologies recommends reviewing this update to determine if it applies to your system. The update contains changes that impact only certain configurations or provides new features that may or may not apply to your environment.
Formate disponibile View Important Information
Format fișier Firmware Images
Nume fișier: Micron C400 7MM 040H.zip
Dimensiune fișier: 1.86 MB
Acesta este un fișier mare. În funcție de viteza conexiunii, descărcarea poate dura mai mult timp.
Descriere format:
Pentru a asigura integritatea descărcării, verificați valoarea cifrei de control.
MD5:
8c093ee80739f53404219cbf429f8f35
SHA1:
c4270268c05b006f6c8e7a3e2bca74a1300bc7c7
SHA-256:
8c5339f143d75bac4c397153a4558628754a43d44472fe734adfaf6e27598938
Prin descărcare, acceptați termenii Dell Software License Agreement.
Informații importante
1. Equipment needed, a CD drive, a blank CD.
2. Do not POWER OFF the system during the firmware update procedure.
3. Please perform a full system backup before starting the firmware update procedure (highly recommended).
4. Connect your notebook to a AC power supply during the firmware update procedure (highly recommended).
5.The firmware utility tool is OS independent.
2. Do not POWER OFF the system during the firmware update procedure.
3. Please perform a full system backup before starting the firmware update procedure (highly recommended).
4. Connect your notebook to a AC power supply during the firmware update procedure (highly recommended).
5.The firmware utility tool is OS independent.
Sisteme de operare acceptate
Windows 7 pe 32 de biți
Windows 7 pe 64 de biți
Windows 8 pe 32 de biți
Windows 8 pe 64 de biți
Se aplică pentru
Micron RealSSD C400
Instrucțiuni de instalare
Backup
1. It is highly recommended that full system backup be completed before starting this firmware upgrade procedure.
Download and image extraction
1. Click Download File to download the zipped file.
2. Extract the file into a folder.
3. The ISO image file is used to burn the utility onto a bootable CD.
Installation
1. Ensure that your notebook is plugged into a AC power supply during the update process (high recommended).
2. DO NOT remove power from the system during the firmware update process.
3. Ensure that your BIOS has been set to ATA or AHCI mode. DO NOT select RAID mode. This utility will not work in RAID mode.
4. Ensure that your BIOS boot order has been set up to boot from CD drive
a. You can do so by either pressing F12 during the boot up and then select CD drive to boot from
b. Or by pressing F2 during the boot up, enter the boot order selection and select CD drive to boot from. Save the setting before exiting.
5. Insert the bootable CD media with ISO image into your system.
6. Reboot the system from the bootable CD media, the firmware update utility will be started automatically.
7. Connected Micron SSD drive that is eligible for the firmware update will be shown on the screen.
8. Select Yes to the request 'Update firmware on this drive?'
9. DO NOT power off the system during the update process, the update will take about 30 to 60 seconds. Some systems may require a longer time to complete.
10. Upon completion, the message 'Current Firmware is: 040H' will be displayed.
1. It is highly recommended that full system backup be completed before starting this firmware upgrade procedure.
Download and image extraction
1. Click Download File to download the zipped file.
2. Extract the file into a folder.
3. The ISO image file is used to burn the utility onto a bootable CD.
Installation
1. Ensure that your notebook is plugged into a AC power supply during the update process (high recommended).
2. DO NOT remove power from the system during the firmware update process.
3. Ensure that your BIOS has been set to ATA or AHCI mode. DO NOT select RAID mode. This utility will not work in RAID mode.
4. Ensure that your BIOS boot order has been set up to boot from CD drive
a. You can do so by either pressing F12 during the boot up and then select CD drive to boot from
b. Or by pressing F2 during the boot up, enter the boot order selection and select CD drive to boot from. Save the setting before exiting.
5. Insert the bootable CD media with ISO image into your system.
6. Reboot the system from the bootable CD media, the firmware update utility will be started automatically.
7. Connected Micron SSD drive that is eligible for the firmware update will be shown on the screen.
8. Select Yes to the request 'Update firmware on this drive?'
9. DO NOT power off the system during the update process, the update will take about 30 to 60 seconds. Some systems may require a longer time to complete.
10. Upon completion, the message 'Current Firmware is: 040H' will be displayed.
Ajutor și tutoriale pentru drivere
Pentru mai multe descărcări, accesați Drivere și descărcări. Pentru ajutor privind utilizarea informațiilor de pe această pagină, accesați Tutoriale și ajutor pentru drivere.