Dell Server Deployment Pack Application 2.1
INSTALATE AUTOMAT Acest fișier a fost instalat automat ca parte a unei actualizări recente. Dacă întâmpinați orice probleme, puteți descărca și reinstala manual.Conținutul acestei pagini este posibil să fi fost tradus automat. Pentru a furniza feedback, completați formularul din partea de jos a paginii.
This package provides the Dell Server Deployment Pack Application and is supported on Enterprise Servers and Powervault models that are running the following Windows Operating Systems: Windwos Server 2008 and Windwos Server 2012.
Recomandate
Găsiți cea mai bună descărcare pentru sistemul dvs.
Introduceți detaliile produsului pentru a vedea cele mai recente informații despre driverele sistemului dvs.Asistență căutare
Introduceți eticheta de service Dell sau modelul
Doriți să vă căutați produsul? Introduceți un identificator de produs. Arătați-mi cum
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Conectați-vă la Windows ca administrator pentru a utiliza scanarea automată. Dacă sunteți deja conectat ca administrator și vedeți acest mesaj, reporniți sistemul. Sistemul dvs. este gestionat de către administratorul IT, iar caracteristicile pot fi limitate.
Găsiți mai multe actualizări. Utilizați SupportAssist pentru a găsi cele mai recente actualizări ale driverelor pentru dispozitivul dvs.
Fixes & Enhancements
Fixes
- Fixed the problems which were reported in earlier releases of DSDP and have been corrected in this release.
- Fixed Retain and Remove DTK screen when you keep the Configuration Manager console open while upgrading DSDP on the Configuration Manager Admin Console, Ignore the screen and click Next.
Enhancements
- Enhanced support for Microsoft System Center Configuration Manager (Configuration Manager) 2012 SP1
- Enhanced support for Windows 2012 Server deployment
- Enhanced support for New Dell Servers:
i. Dell PowerEdge M420
ii. Dell PowerEdge R520
iii. Dell PowerEdge R320
iv. Dell PowerEdge R420
v. Dell PowerEdge M520
vi. Dell PowerEdge T420
vii. Dell PowerEdge T320
viii. Dell PowerEdge M820
-Enhanced support for installing Dell Server Deployment Pack on a Configuration Manager where the SMS provider is installed on a system other than the site server system.
Citiți mai multe- Fixed the problems which were reported in earlier releases of DSDP and have been corrected in this release.
- Fixed Retain and Remove DTK screen when you keep the Configuration Manager console open while upgrading DSDP on the Configuration Manager Admin Console, Ignore the screen and click Next.
Enhancements
- Enhanced support for Microsoft System Center Configuration Manager (Configuration Manager) 2012 SP1
- Enhanced support for Windows 2012 Server deployment
- Enhanced support for New Dell Servers:
i. Dell PowerEdge M420
ii. Dell PowerEdge R520
iii. Dell PowerEdge R320
iv. Dell PowerEdge R420
v. Dell PowerEdge M520
vi. Dell PowerEdge T420
vii. Dell PowerEdge T320
viii. Dell PowerEdge M820
-Enhanced support for installing Dell Server Deployment Pack on a Configuration Manager where the SMS provider is installed on a system other than the site server system.
Versiune
2.1, A00
Data lansării:
29 mai 2013
Tip de descărcare
Aplicații
Categorie
Gestionarea sistemelor
Importanță
OptionalDell Technologies recommends reviewing this update to determine if it applies to your system. The update contains changes that impact only certain configurations or provides new features that may or may not apply to your environment.
Formate disponibile View Important Information
Format fișier Extrage fișiere direct pe discul local
Nume fișier: Dell_Server_Deployment_Pack_v2.1_for_Configuration_Manager_A00.exe
Dimensiune fișier: 82.56 MB
Acesta este un fișier mare. În funcție de viteza conexiunii, descărcarea poate dura mai mult timp.
Descriere format:
This file format consists of an archive of files that may be decompressed to a directory on the hard drive. The installation can then be done from that directory.
Pentru a asigura integritatea descărcării, verificați valoarea cifrei de control.
MD5:
27d61121ce7bc5afc6d3ceef4351b33d
SHA1:
808c6bdaf6dd7b1ff0d815abe3869a4649c3c71d
SHA-256:
366874c8fdb3fa538bb43195fde4a560bd58863a206830559da51467257e5b51
Prin descărcare, acceptați termenii Dell Software License Agreement.
Informații importante
Important Notes
1. Dell Server Deployment Pack 2.1 includes DTK 4.2.0.1 in same package.
2. In iDRAC network settings, if the "Auto config Domain Name" is enabled for a target, then the task sequence "Static DNS Domain Name" used for configuring iDRAC will fail to set the configuration; however, the task sequence will not report any error, and the next task will continue to run.
3. To avoid this issue, before you run the task sequence, in iDRAC network settings, clear "Auto config Domain Name."
4. In the task sequence, it is recommended that you do not move or delete these Custom Action steps - "Restart in WinPE", "SetRebootStep", "Reboot to PXE/USB", Second "Format and Partition" step, "Setup windows and ConfigMgr," and "Reset RebootStep".
5. On a client machine, a task will fail if the Dell Remote Access Controller "Virtual Flash" is set to "enabled".
6. To prevent this failure, ensure that the "Virtual Flash" is set to "disabled" when a task is executed on the client machine.
7. After an operating system is deployed, ensure that the installed mass-storage driver is same as that specified in the Task Sequence.
8. If you find any differences, update the driver manually.
9. In Array Builder, you cannot delete the logical drive under Non-RAID disks.
10. In Configuration Manager 2007, when Dell specific packages, drivers, and boot images are managed using Configuration Manager's "Manage Distribution Point Wizard," the confirmation page displays incomplete summary.
11. In the Task Sequence Editor Window, to modify the path under "Logs/Return Files" page for the Dell custom actions, click "APPLY" and "OK."
12. When DSDP is being uninstalled on Windows Server 2008 operating system, a message displays that a reboot is required to complete the setup. Ignore this message and click "OK" to complete the uninstallation.
13. There is no new version of "ConfigMgr Client Package" for DSDP 2.1.
1. Dell Server Deployment Pack 2.1 includes DTK 4.2.0.1 in same package.
2. In iDRAC network settings, if the "Auto config Domain Name" is enabled for a target, then the task sequence "Static DNS Domain Name" used for configuring iDRAC will fail to set the configuration; however, the task sequence will not report any error, and the next task will continue to run.
3. To avoid this issue, before you run the task sequence, in iDRAC network settings, clear "Auto config Domain Name."
4. In the task sequence, it is recommended that you do not move or delete these Custom Action steps - "Restart in WinPE", "SetRebootStep", "Reboot to PXE/USB", Second "Format and Partition" step, "Setup windows and ConfigMgr," and "Reset RebootStep".
5. On a client machine, a task will fail if the Dell Remote Access Controller "Virtual Flash" is set to "enabled".
6. To prevent this failure, ensure that the "Virtual Flash" is set to "disabled" when a task is executed on the client machine.
7. After an operating system is deployed, ensure that the installed mass-storage driver is same as that specified in the Task Sequence.
8. If you find any differences, update the driver manually.
9. In Array Builder, you cannot delete the logical drive under Non-RAID disks.
10. In Configuration Manager 2007, when Dell specific packages, drivers, and boot images are managed using Configuration Manager's "Manage Distribution Point Wizard," the confirmation page displays incomplete summary.
11. In the Task Sequence Editor Window, to modify the path under "Logs/Return Files" page for the Dell custom actions, click "APPLY" and "OK."
12. When DSDP is being uninstalled on Windows Server 2008 operating system, a message displays that a reboot is required to complete the setup. Ignore this message and click "OK" to complete the uninstallation.
13. There is no new version of "ConfigMgr Client Package" for DSDP 2.1.
Sisteme de operare acceptate
Windows Server 2008 x64
Windows Server 2012
Windows Server 2008 x86
Windows Server 2008 R2
Instrucțiuni de instalare
Hard Drive Installation (File Extractions Only) Instructions
Download
1.Click Download File, to download the file.
2. When the File Download window appears, click Save or Save this program to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Follow the remaining prompts to perform the update.
Download
1.Click Download File, to download the file.
2. When the File Download window appears, click Save or Save this program to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Follow the remaining prompts to perform the update.
Ajutor și tutoriale pentru drivere
Pentru mai multe descărcări, accesați Drivere și descărcări. Pentru ajutor privind utilizarea informațiilor de pe această pagină, accesați Tutoriale și ajutor pentru drivere.