Fujitsu MHT2020AT (20GB) Mobile HDD, MHT2030AT (30GB) Mobile HDD, MHT2060AT (60GB) Mobile HDD, MHT2040AT (40GB) Mobile HDD, v.009B, A02
INSTALATE AUTOMAT Acest fișier a fost instalat automat ca parte a unei actualizări recente. Dacă întâmpinați orice probleme, puteți descărca și reinstala manual.Conținutul acestei pagini este posibil să fi fost tradus automat. Pentru a furniza feedback, completați formularul din partea de jos a paginii.
This software updates particular Fujitsu MHT2020AT, MHT2030AT, MHT2040AT, and MHT2060AT notebook hard drives to fix a potential Drive Not Ready issue.
- This release allows flashing of secondary master HDD and supports the following media:
- Diskette [BR64893.exe]
- Bootable Removable media (USB Flash Memory, Zip Drive, etc) [R64893.EXE]
- CD-R/RW [FJ009B.ISO].
- This release allows flashing of secondary master HDD and supports the following media:
- Diskette [BR64893.exe]
- Bootable Removable media (USB Flash Memory, Zip Drive, etc) [R64893.EXE]
- CD-R/RW [FJ009B.ISO].
Recomandate
Găsiți cea mai bună descărcare pentru sistemul dvs.
Introduceți detaliile produsului pentru a vedea cele mai recente informații despre driverele sistemului dvs.Asistență căutare
Introduceți eticheta de service Dell sau modelul
Doriți să vă căutați produsul? Introduceți un identificator de produs. Arătați-mi cum
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Conectați-vă la Windows ca administrator pentru a utiliza scanarea automată. Dacă sunteți deja conectat ca administrator și vedeți acest mesaj, reporniți sistemul. Sistemul dvs. este gestionat de către administratorul IT, iar caracteristicile pot fi limitate.
Găsiți mai multe actualizări. Utilizați SupportAssist pentru a găsi cele mai recente actualizări ale driverelor pentru dispozitivul dvs.
Fixes & Enhancements
Adding Azeda, may not be needed since new drives have latest FW
Citiți mai multeVersiune
009B, A02
Data lansării:
08 aug. 2003
Tip de descărcare
Firmware
Categorie
IDE/EIDE
Importanță
OptionalDell Technologies recommends reviewing this update to determine if it applies to your system. The update contains changes that impact only certain configurations or provides new features that may or may not apply to your environment.
Formate disponibile View Important Information
Format fișier Extrage fișiere direct pe discul local
Nume fișier: FJ009B.ISO
Dimensiune fișier: 2.06 MB
Acesta este un fișier mare. În funcție de viteza conexiunii, descărcarea poate dura mai mult timp.
Descriere format:
This file format consists of an archive of files that may be decompressed to a directory on the hard drive. The installation can then be done from that directory.
Pentru a asigura integritatea descărcării, verificați valoarea cifrei de control.
MD5:
Not available
SHA1:
Not available
SHA-256:
Not available
Format fișier One or more self extracting disk images inside of a self extracting zip
Nume fișier: BR64893.exe
Dimensiune fișier: 757.21 KB
Acesta este un fișier mare. În funcție de viteza conexiunii, descărcarea poate dura mai mult timp.
Descriere format:
This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, then double-click it to unzip the set of files. Follow the instructions to complete the installation.
Pentru a asigura integritatea descărcării, verificați valoarea cifrei de control.
MD5:
Not available
SHA1:
Not available
SHA-256:
Not available
Format fișier ZipPack External
Nume fișier: R64893.EXE
Dimensiune fișier: 370.02 KB
Acesta este un fișier mare. În funcție de viteza conexiunii, descărcarea poate dura mai mult timp.
Descriere format:
This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.
Pentru a asigura integritatea descărcării, verificați valoarea cifrei de control.
MD5:
Not available
SHA1:
Not available
SHA-256:
Not available
Prin descărcare, acceptați termenii Dell Software License Agreement.
Informații importante
PLEASE MAKE SURE A/C POWER IS BEING USED WHILE UPDATING YOUR HARD DRIVE. POWER OFF THE SYSTEM AFTER FIRMWARE UPDATE IS COMPLETED.
Sisteme de operare acceptate
Windows 2000
Windows XP
Instrucțiuni de instalare
For Diskette:
1) Click on (BR64893.exe). This will begin the diskette creation process.
2) Follow the instructions provided.
3) Insert a blank diskette when requested.
4) Once the diskette creation is complete, restart your system with the diskette inserted. (PLEASE MAKE SURE A/C POWER IS BEING USED WHILE UPDATING YOUR HARD DRIVE)
5) The utility will identify your hard drive (Fujitsu MHT2020AT, MHT2030AT, MHT2040AT, and MHT2060AT) and require you to press "Y" & "Enter" to proceed. (The utility will NOT flash an unsupported model)
7) The utility will return you to an "A:\>" when complete.
8) Remove the diskette and restart your system.
For Removable media and bootable flash memory storage devices:
*** Removable media such as Zip Drive & USB Flash Memory must already contain system files to boot to DOS ***
1) The files contained in (R64893.EXE) should be extracted to a bootable media. The default extraction directory is C:\DELL\DRIVERS\R64893.
2) Once the files are extracted, copy the contents of C:\DELL\DRIVERS\R64893 directory to the bootable source.
3) Boot to that source. (PLEASE MAKE SURE A/C POWER IS BEING USED WHILE UPDATING YOUR HARD DRIVE)
4) The utility will identify your hard drive (Fujitsu MHT2020AT, MHT2030AT, MHT2040AT, and MHT2060AT) and require you to press "Y" & "Enter" to proceed. (The utility will NOT flash an unsupported model)
5) The utility will exit and return to the prompt it was executed from when complete.
For bootable CD-ROM image:
*** CD-R/RW recording software must support *.ISO extension in order to use this image file. ***
1) Save the FJ009B.ISO to a known directory - recommend Desktop for easy access.
2) Start your CD-R/RW recording software software.
3) Locate the downloaded FJ009B.ISO.
4) Insert a blank CD-R/RW and start the recording process.
5) Restart the system and boot to the optical drive. (PLEASE MAKE SURE A/C POWER IS BEING USED WHILE UPDATING YOUR HARD DRIVE)
6) The utility will identify your hard drive (Fujitsu MHT2020AT, MHT2030AT, MHT2040AT, and MHT2060AT) and require you to press "Y" & "Enter" to proceed. (The utility will NOT flash an unsupported model)
7) The utility will exit and return to the prompt it was executed from when complete.
1) Click on (BR64893.exe). This will begin the diskette creation process.
2) Follow the instructions provided.
3) Insert a blank diskette when requested.
4) Once the diskette creation is complete, restart your system with the diskette inserted. (PLEASE MAKE SURE A/C POWER IS BEING USED WHILE UPDATING YOUR HARD DRIVE)
5) The utility will identify your hard drive (Fujitsu MHT2020AT, MHT2030AT, MHT2040AT, and MHT2060AT) and require you to press "Y" & "Enter" to proceed. (The utility will NOT flash an unsupported model)
7) The utility will return you to an "A:\>" when complete.
8) Remove the diskette and restart your system.
For Removable media and bootable flash memory storage devices:
*** Removable media such as Zip Drive & USB Flash Memory must already contain system files to boot to DOS ***
1) The files contained in (R64893.EXE) should be extracted to a bootable media. The default extraction directory is C:\DELL\DRIVERS\R64893.
2) Once the files are extracted, copy the contents of C:\DELL\DRIVERS\R64893 directory to the bootable source.
3) Boot to that source. (PLEASE MAKE SURE A/C POWER IS BEING USED WHILE UPDATING YOUR HARD DRIVE)
4) The utility will identify your hard drive (Fujitsu MHT2020AT, MHT2030AT, MHT2040AT, and MHT2060AT) and require you to press "Y" & "Enter" to proceed. (The utility will NOT flash an unsupported model)
5) The utility will exit and return to the prompt it was executed from when complete.
For bootable CD-ROM image:
*** CD-R/RW recording software must support *.ISO extension in order to use this image file. ***
1) Save the FJ009B.ISO to a known directory - recommend Desktop for easy access.
2) Start your CD-R/RW recording software software.
3) Locate the downloaded FJ009B.ISO.
4) Insert a blank CD-R/RW and start the recording process.
5) Restart the system and boot to the optical drive. (PLEASE MAKE SURE A/C POWER IS BEING USED WHILE UPDATING YOUR HARD DRIVE)
6) The utility will identify your hard drive (Fujitsu MHT2020AT, MHT2030AT, MHT2040AT, and MHT2060AT) and require you to press "Y" & "Enter" to proceed. (The utility will NOT flash an unsupported model)
7) The utility will exit and return to the prompt it was executed from when complete.
Ajutor și tutoriale pentru drivere
Pentru mai multe descărcări, accesați Drivere și descărcări. Pentru ajutor privind utilizarea informațiilor de pe această pagină, accesați Tutoriale și ajutor pentru drivere.