LSI Logic PERC 4/SC, PERC 4/DC, v.352D, A22
INSTALATE AUTOMAT Acest fișier a fost instalat automat ca parte a unei actualizări recente. Dacă întâmpinați orice probleme, puteți descărca și reinstala manual.Conținutul acestei pagini este posibil să fi fost tradus automat. Pentru a furniza feedback, completați formularul din partea de jos a paginii.
Dell PowerEdge Expandable RAID Controller 4/DC and 4/SC Firmware Update
Version: 352D
Version: 352D
Recomandate
Găsiți cea mai bună descărcare pentru sistemul dvs.
Introduceți detaliile produsului pentru a vedea cele mai recente informații despre driverele sistemului dvs.Asistență căutare
Introduceți eticheta de service Dell sau modelul
Doriți să vă căutați produsul? Introduceți un identificator de produs. Arătați-mi cum
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Conectați-vă la Windows ca administrator pentru a utiliza scanarea automată. Dacă sunteți deja conectat ca administrator și vedeți acest mesaj, reporniți sistemul. Sistemul dvs. este gestionat de către administratorul IT, iar caracteristicile pot fi limitate.
Găsiți mai multe actualizări. Utilizați SupportAssist pentru a găsi cele mai recente actualizări ale driverelor pentru dispozitivul dvs.
Fixes & Enhancements
Fixes:
1. Addresses a problem that may occur if a drive fails with in seconds after another drive completes a rebuild.
2. Fixed issue on PERC Controllers where VMFS Volumes go missing in VMware ESX environments after updating firmware from version 351X and earlier to 352B
Note: Updating to (352D from a system that was installed onto 352B) will require customers to resignature the volumes in order to have VMware to recognize the volumes.
Affected upgrade scenarios:
a. Upgrade from 351X to 352B
b. Upgrade from 352B to 352D
c. Upgrade from 351X to 352B then to 352D
Unaffected upgrade scenarios:
a. Upgrade from 351X and earlier to 352D
Citiți mai multe1. Addresses a problem that may occur if a drive fails with in seconds after another drive completes a rebuild.
2. Fixed issue on PERC Controllers where VMFS Volumes go missing in VMware ESX environments after updating firmware from version 351X and earlier to 352B
Note: Updating to (352D from a system that was installed onto 352B) will require customers to resignature the volumes in order to have VMware to recognize the volumes.
Affected upgrade scenarios:
a. Upgrade from 351X to 352B
b. Upgrade from 352B to 352D
c. Upgrade from 351X to 352B then to 352D
Unaffected upgrade scenarios:
a. Upgrade from 351X and earlier to 352D
Versiune
352D, A22
Data lansării:
18 iul. 2007
Tip de descărcare
Firmware
Categorie
Configurații RAID pentru SCSI
Importanță
UrgentDell Technologies highly recommends applying this important update as soon as possible. The update contains critical bug fixes and changes to improve functionality, reliability, and stability of your Dell system. It may also include security fixes and other feature enhancements.
Formate disponibile View Important Information
Format fișier Actualizați pachetul pentru MS Windows pe 32 de biți
Nume fișier: RAID_FRMW_WIN_R151923.EXE
Dimensiune fișier: 5.08 MB
Acesta este un fișier mare. În funcție de viteza conexiunii, descărcarea poate dura mai mult timp.
Descriere format:
Dell Update Packages (DUP) in Microsoft Windows 32bit format have been designed to run on Microsoft Windows 64bit Operating Systems. Dell Update Packages (DUP) in Microsoft Windows 64bit format will only run on Microsoft Windows 64bit Operating Systems. When selecting a device driver update be sure to select the one that is appropriate for your operating system.
Pentru a asigura integritatea descărcării, verificați valoarea cifrei de control.
MD5:
C80B13D89FEC51D92D8A2FFC9896786B
SHA1:
Not available
SHA-256:
Not available
Format fișier One or more self extracting disk images inside of a self extracting zip
Nume fișier: BR151923.exe
Dimensiune fișier: 1.2 MB
Acesta este un fișier mare. În funcție de viteza conexiunii, descărcarea poate dura mai mult timp.
Descriere format:
This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, then double-click it to unzip the set of files. Follow the instructions to complete the installation.
Pentru a asigura integritatea descărcării, verificați valoarea cifrei de control.
MD5:
2d2e4802c78af52d1f48c55088c140e8
SHA1:
Not available
SHA-256:
Not available
Format fișier A GnuPG file which contains a cryptographic signature
Nume fișier: RAID_FRMW_LX_R151923.BIN.sign
Dimensiune fișier: 194 Bytes
Acesta este un fișier mare. În funcție de viteza conexiunii, descărcarea poate dura mai mult timp.
Descriere format:
The GnuPG signature for Red Hat Linux Update Package can be used to authenticate Dell's identity in the correlated Red Hat Linux Update Package.
Pentru a asigura integritatea descărcării, verificați valoarea cifrei de control.
MD5:
CE7274496272213652A8073978888AB4
SHA1:
Not available
SHA-256:
Not available
Format fișier External release notes
Nume fișier: perc4-FWP4352D-A22.txt
Dimensiune fișier: 14.42 KB
Acesta este un fișier mare. În funcție de viteza conexiunii, descărcarea poate dura mai mult timp.
Descriere format:
This file format contains plain text which can be viewed with a standard text editor.
Pentru a asigura integritatea descărcării, verificați valoarea cifrei de control.
MD5:
82dad2f88c488382e9a84340d3678c9c
SHA1:
Not available
SHA-256:
Not available
Format fișier Update Package for Red Hat Linux
Nume fișier: RAID_FRMW_LX_R151923.BIN
Dimensiune fișier: 10.99 MB
Acesta este un fișier mare. În funcție de viteza conexiunii, descărcarea poate dura mai mult timp.
Descriere format:
Dell Update Packages for Linux can be used as stand-alone applications that ensure that specific validation criteria are met, then apply an update.
Note: Update Packages for Linux are open source. See the Dell Update Packages for Linux Readme for details.
Note: Update Packages for Linux are open source. See the Dell Update Packages for Linux Readme for details.
Pentru a asigura integritatea descărcării, verificați valoarea cifrei de control.
MD5:
B21E170C7FC9EC97738D34F19764DB30
SHA1:
Not available
SHA-256:
Not available
Prin descărcare, acceptați termenii Dell Software License Agreement.
Informații importante
1. After installing this firmware and rebooting, a consistency check will automatically begin on
RAID 5 and 50 virtual disks with 5 or more physical disks to ensure parity information is
correct. The consistency check cannot be terminated and will resume at its last point
following a reboot. This consistency check will appear as a Background Initialization but
will only perform a consistency check with no data being modified. The consistency check runs
in the background, allowing the virtual disks to remain accessible during the check. While
this background check is designed to minimize performance impact, some degradation in
performance may occur until the check is complete, especially under heavy I/O.
RAID 5 and 50 virtual disks with 5 or more physical disks to ensure parity information is
correct. The consistency check cannot be terminated and will resume at its last point
following a reboot. This consistency check will appear as a Background Initialization but
will only perform a consistency check with no data being modified. The consistency check runs
in the background, allowing the virtual disks to remain accessible during the check. While
this background check is designed to minimize performance impact, some degradation in
performance may occur until the check is complete, especially under heavy I/O.
Sisteme de operare acceptate
Nu se aplică
Se aplică pentru
PERC 4/DC
PERC 4/SC
Instrucțiuni de instalare
Custom Instructions for BR151923.exe:
This program creates a bootable diskette to upgrade the firmware of the
controllers. You will need a formatted 3 1/2 inch floppy diskette for the
following procedure.
1) Download the file to a directory on your hard drive. The file downloaded is
a self extracting executable.
2) Insert a blank diskette into the system's diskette drive.
3) Double click on the file that you downloaded and follow the instructions on
the screen to extract the files to the diskette.
4) Insert the diskette into the system with the RAID controller for which you
want to update the firmware and boot the system.
5) Follow the instructions on the screen to update the firmware.
NOTICE: Pflash.exe will be executed automatically and will report existing code
level and prompt you to reconfirm before starting the firmware upgrade
process.
To perform this process in non-interactive mode please execute,
Pflash /?
and read about possible command line switches.
6) Remove the diskette and reboot the system.
Custom Instructions for perc4-FWP4352D-A22.txt:
Download the readme file to view information about this release.
Instructions for RAID_FRMW_LX_R151923.BIN:
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Installation
1. Read over the release information presented by executing the ./RAID_FRMW_LX_R151923.BIN --version command from the shell.
2. Download and install any prerequisites identified in the above step before proceeding.
3. Run the update by executing ./RAID_FRMW_LX_R151923.BIN from the shell.
4. Follow the remaining prompts to perform the update.
GnuPG Signature of Dell Update Package Instructions for RAID_FRMW_LX_R151923.BIN.sign:
Download
1. Click the "Download Now" link to download the file.
2. When the "File Download" window appears, click "Save" to save the file to your hard drive.
Installation
1. Import the Dell public key. (You only need to do once on your system.)
2. Verify the Dell Update Package by using its signature file, RAID_FRMW_LX_R151923.BIN.sign
Instructions for RAID_FRMW_WIN_R151923.EXE:
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.
This program creates a bootable diskette to upgrade the firmware of the
controllers. You will need a formatted 3 1/2 inch floppy diskette for the
following procedure.
1) Download the file to a directory on your hard drive. The file downloaded is
a self extracting executable.
2) Insert a blank diskette into the system's diskette drive.
3) Double click on the file that you downloaded and follow the instructions on
the screen to extract the files to the diskette.
4) Insert the diskette into the system with the RAID controller for which you
want to update the firmware and boot the system.
5) Follow the instructions on the screen to update the firmware.
NOTICE: Pflash.exe will be executed automatically and will report existing code
level and prompt you to reconfirm before starting the firmware upgrade
process.
To perform this process in non-interactive mode please execute,
Pflash /?
and read about possible command line switches.
6) Remove the diskette and reboot the system.
Custom Instructions for perc4-FWP4352D-A22.txt:
Download the readme file to view information about this release.
Instructions for RAID_FRMW_LX_R151923.BIN:
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Installation
1. Read over the release information presented by executing the ./RAID_FRMW_LX_R151923.BIN --version command from the shell.
2. Download and install any prerequisites identified in the above step before proceeding.
3. Run the update by executing ./RAID_FRMW_LX_R151923.BIN from the shell.
4. Follow the remaining prompts to perform the update.
GnuPG Signature of Dell Update Package Instructions for RAID_FRMW_LX_R151923.BIN.sign:
Download
1. Click the "Download Now" link to download the file.
2. When the "File Download" window appears, click "Save" to save the file to your hard drive.
Installation
1. Import the Dell public key. (You only need to do once on your system.)
2. Verify the Dell Update Package by using its signature file, RAID_FRMW_LX_R151923.BIN.sign
Instructions for RAID_FRMW_WIN_R151923.EXE:
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.
Ajutor și tutoriale pentru drivere
Pentru mai multe descărcări, accesați Drivere și descărcări. Pentru ajutor privind utilizarea informațiilor de pe această pagină, accesați Tutoriale și ajutor pentru drivere.