NAUTILUS,DOS,A36
Este necesară repornirea INSTALATE AUTOMAT Acest fișier a fost instalat automat ca parte a unei actualizări recente. Dacă întâmpinați orice probleme, puteți descărca și reinstala manual.Conținutul acestei pagini este posibil să fi fost tradus automat. Pentru a furniza feedback, completați formularul din partea de jos a paginii.
This is a general maintenance release for SAS and SATA drives. It is a re-release of the previous version with additional firmware updates.
Recomandate
Găsiți cea mai bună descărcare pentru sistemul dvs.
Introduceți detaliile produsului pentru a vedea cele mai recente informații despre driverele sistemului dvs.Asistență căutare
Introduceți eticheta de service Dell sau modelul
Doriți să vă căutați produsul? Introduceți un identificator de produs. Arătați-mi cum
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Conectați-vă la Windows ca administrator pentru a utiliza scanarea automată. Dacă sunteți deja conectat ca administrator și vedeți acest mesaj, reporniți sistemul. Sistemul dvs. este gestionat de către administratorul IT, iar caracteristicile pot fi limitate.
Găsiți mai multe actualizări. Utilizați SupportAssist pentru a găsi cele mai recente actualizări ale driverelor pentru dispozitivul dvs.
Fixes & Enhancements
Fixes:
The Hitachi SAS release for 15K 3.5 SAS hard drive firmware to fix Linux install hang in a RAID-0 config.
During a Linux install small block sequential writes occur which brings out this bug and result in a hang
during install when attached to SAS-5 iR running in RAID 0. The firmware will rev from A48B to A5F0.
Enhancements:
None
Citiți mai multeThe Hitachi SAS release for 15K 3.5 SAS hard drive firmware to fix Linux install hang in a RAID-0 config.
During a Linux install small block sequential writes occur which brings out this bug and result in a hang
during install when attached to SAS-5 iR running in RAID 0. The firmware will rev from A48B to A5F0.
Enhancements:
None
Versiune
SATA, A36
Data lansării:
06 iun. 2012
Tip de descărcare
Utility
Categorie
Soluții de stocare
Importanță
RecommendedDell Technologies recomandă aplicarea acestei actualizări în următorul ciclu de actualizare programat. Actualizarea conține modificări pentru menținerea stării generale de funcționare a sistemului. Acesta asigură faptul că software-ul sistemului rămâne actual și compatibil cu alte module de sistem (firmware, BIOS, drivere și software) și poate include alte caracteristici noi.
Formate disponibile View Important Information
Format fișier External release notes
Nume fișier: Release Notes A36.txt
Dimensiune fișier: 69.55 KB
Acesta este un fișier mare. În funcție de viteza conexiunii, descărcarea poate dura mai mult timp.
Descriere format:
This file format contains plain text which can be viewed with a standard text editor.
Pentru a asigura integritatea descărcării, verificați valoarea cifrei de control.
MD5:
bc5cbe06deae133436feb701754c5af8
SHA1:
22a218581f3403827d15f2a11ddb1ee0b222e0e4
SHA-256:
Not available
Format fișier ZipPack External
Nume fișier: SAS_SATA_A36_ZPE.exe
Dimensiune fișier: 91.47 MB
Acesta este un fișier mare. În funcție de viteza conexiunii, descărcarea poate dura mai mult timp.
Descriere format:
This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.
Pentru a asigura integritatea descărcării, verificați valoarea cifrei de control.
MD5:
1088e9920c0e3a8f17ca4d692ad5d4ab
SHA1:
65d0b28c0a7b52c0b2ac04aa9d4f360339d967a0
SHA-256:
5d489e85d315bc1e35d38f280bacb78405e594bee450889f78214deb0a1fc495
Prin descărcare, acceptați termenii Dell Software License Agreement.
Informații importante
This release is intended for use on drives attached to SAS/ PERC controllers and MD1000, MD1120, MD1200 and MD1220 Enclosures. To update drives attached to MD3000 and MD3000i enclosures, use R310916"
Please note: Only Dell Branded SAS/SCSI, PERC and embedded ICH controllers are supported.
On drives attached to PERC5/PERC6 controllers, the first drive to be updated requires a 5 minute delay before firmware flash to begin. Do not power cycle or reboot your system while the update is in progress.
Please note: Only Dell Branded SAS/SCSI, PERC and embedded ICH controllers are supported.
On drives attached to PERC5/PERC6 controllers, the first drive to be updated requires a 5 minute delay before firmware flash to begin. Do not power cycle or reboot your system while the update is in progress.
Sisteme de operare acceptate
Nu se aplică
Se aplică pentru
Dell SAS/SATA Hard Drive
Instrucțiuni de instalare
1) Click Download now.
The File Download window appears.
2) Click the Save button.
The Save As window appears.
3) Select Desktop using the drop-down menu to the right of Save in.
4) Click the Save button.
A progress meter moves as the download is completed.
5) If necessary, click X in the upper right-hand corner of the Download Progress Window to close it upon completion.
6) Double click the Icon on your desktop for the newly saved file.
The Dell Bios Release Notes window appears.
NOTE: In order to create the Hard drive firmware update media using this package, this file must be downloaded to and executed on a system running Microsoft Windows. This package can be used to create a bootable USB flash drive, CD, or hard drive image.
Download
1. Select the download method you want to use to retrieve the file - either HTTP or FTP.
2. If the Export Compliance Disclaimer window appears, read the agreement and then select either "I agree" or "I disagree".
3. When the File Download window appears, click Save.
4. From the Save As dialog, select a location and a file name then click "Save".
5. If a Download Complete window appears, click Close.
Hard Drive Firmware Media Creation
1. Browse to the location where you downloaded the file and double-click it to extract the diagnostic files and start the distribution application.
2. Verify that you have the correct diagnostic package by reviewing the information on the dialog box that appears then click Continue.
3. Specify the location to unzip the files.
4. Click on the OK button to extract files. After the files are extracted, a message should appear indicating that all files were successfully unzipped.
5. Click the OK button to start the Hard Drive Firmware Package. Follow the on screen prompts to create the media desired.
CD Media Creation
1. Follow your CD writing software vendor's instructions to create a CD from the downloaded .ISO file.
Note: If CD media is viewed using Windows explorer, only the file Booting.txt will be visible. This CD was created using hard-disk emulation.
Running the Hard Drive Firmware Update Utility
1. Insert the media you created.
2. Boot the computer. (You may have to configure the boot order in BIOS setup to boot the media you created before other devices.)
3. Follow the screen prompts to update your drive firmware.
There will be a readme.txt file for DDDP usage and a text file for drives affected in the location you selected to unzip the files that contains additional and late breaking information. If you need to run the Delivery Package again, you can run the file DDDP.exe from that same location.
The File Download window appears.
2) Click the Save button.
The Save As window appears.
3) Select Desktop using the drop-down menu to the right of Save in.
4) Click the Save button.
A progress meter moves as the download is completed.
5) If necessary, click X in the upper right-hand corner of the Download Progress Window to close it upon completion.
6) Double click the Icon on your desktop for the newly saved file.
The Dell Bios Release Notes window appears.
NOTE: In order to create the Hard drive firmware update media using this package, this file must be downloaded to and executed on a system running Microsoft Windows. This package can be used to create a bootable USB flash drive, CD, or hard drive image.
Download
1. Select the download method you want to use to retrieve the file - either HTTP or FTP.
2. If the Export Compliance Disclaimer window appears, read the agreement and then select either "I agree" or "I disagree".
3. When the File Download window appears, click Save.
4. From the Save As dialog, select a location and a file name then click "Save".
5. If a Download Complete window appears, click Close.
Hard Drive Firmware Media Creation
1. Browse to the location where you downloaded the file and double-click it to extract the diagnostic files and start the distribution application.
2. Verify that you have the correct diagnostic package by reviewing the information on the dialog box that appears then click Continue.
3. Specify the location to unzip the files.
4. Click on the OK button to extract files. After the files are extracted, a message should appear indicating that all files were successfully unzipped.
5. Click the OK button to start the Hard Drive Firmware Package. Follow the on screen prompts to create the media desired.
CD Media Creation
1. Follow your CD writing software vendor's instructions to create a CD from the downloaded .ISO file.
Note: If CD media is viewed using Windows explorer, only the file Booting.txt will be visible. This CD was created using hard-disk emulation.
Running the Hard Drive Firmware Update Utility
1. Insert the media you created.
2. Boot the computer. (You may have to configure the boot order in BIOS setup to boot the media you created before other devices.)
3. Follow the screen prompts to update your drive firmware.
There will be a readme.txt file for DDDP usage and a text file for drives affected in the location you selected to unzip the files that contains additional and late breaking information. If you need to run the Delivery Package again, you can run the file DDDP.exe from that same location.
Ajutor și tutoriale pentru drivere
Pentru mai multe descărcări, accesați Drivere și descărcări. Pentru ajutor privind utilizarea informațiilor de pe această pagină, accesați Tutoriale și ajutor pentru drivere.