Do not turn off your computer or disconnect from the power source while updating the BIOS as this could harm your computer. During the update, your computer will restart and you may briefly see a black screen.
Before updating, please read the installation instructions and important information noted below.
Dell PowerEdge C1100 BIOS, v.S99C3B22, 3B22
INSTALATE AUTOMAT Acest fișier a fost instalat automat ca parte a unei actualizări recente. Dacă întâmpinați orice probleme, puteți descărca și reinstala manual.Conținutul acestei pagini este posibil să fi fost tradus automat. Pentru a furniza feedback, completați formularul din partea de jos a paginii.
PEC1100 BIOS 3B22
Recomandate
Găsiți cea mai bună descărcare pentru sistemul dvs.
Introduceți detaliile produsului pentru a vedea cele mai recente informații despre driverele sistemului dvs.Asistență căutare
Introduceți eticheta de service Dell sau modelul
Doriți să vă căutați produsul? Introduceți un identificator de produs. Arătați-mi cum
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Conectați-vă la Windows ca administrator pentru a utiliza scanarea automată. Dacă sunteți deja conectat ca administrator și vedeți acest mesaj, reporniți sistemul. Sistemul dvs. este gestionat de către administratorul IT, iar caracteristicile pot fi limitate.
Găsiți mai multe actualizări. Utilizați SupportAssist pentru a găsi cele mai recente actualizări ale driverelor pentru dispozitivul dvs.
Fixes & Enhancements
Enhance
1. fix - BIOS POST display abnormal character.
Citiți mai multe1. fix - BIOS POST display abnormal character.
Versiune
S99C3B22, 3B22
Data lansării:
31 oct. 2011
Tip de descărcare
Interfața BIOS
Categorie
BIOS
Importanță
RecommendedDell Technologies recomandă aplicarea acestei actualizări în următorul ciclu de actualizare programat. Actualizarea conține modificări pentru menținerea stării generale de funcționare a sistemului. Acesta asigură faptul că software-ul sistemului rămâne actual și compatibil cu alte module de sistem (firmware, BIOS, drivere și software) și poate include alte caracteristici noi.
Formate disponibile View Important Information
Format fișier Update Package for Red Hat Linux
Nume fișier: PECC1100_BIOS_LX_R316289.BIN
Dimensiune fișier: 3.42 MB
Acesta este un fișier mare. În funcție de viteza conexiunii, descărcarea poate dura mai mult timp.
Descriere format:
Dell Update Packages for Linux can be used as stand-alone applications that ensure that specific validation criteria are met, then apply an update.
Note: Update Packages for Linux are open source. See the Dell Update Packages for Linux Readme for details.
Note: Update Packages for Linux are open source. See the Dell Update Packages for Linux Readme for details.
Pentru a asigura integritatea descărcării, verificați valoarea cifrei de control.
MD5:
B9B0C2F4F287CB1190B66800E9B1A052
SHA1:
Not available
SHA-256:
Not available
Format fișier A GnuPG file which contains a cryptographic signature
Nume fișier: PECC1100_BIOS_LX_R316289.BIN.sign
Dimensiune fișier: 194 Bytes
Acesta este un fișier mare. În funcție de viteza conexiunii, descărcarea poate dura mai mult timp.
Descriere format:
The GnuPG signature for Red Hat Linux Update Package can be used to authenticate Dell's identity in the correlated Red Hat Linux Update Package.
Pentru a asigura integritatea descărcării, verificați valoarea cifrei de control.
MD5:
BDBB81761C643C444DD3C45B8C916106
SHA1:
Not available
SHA-256:
Not available
Format fișier ZipPack External
Nume fișier: R316289_S99C3B22_0462.exe
Dimensiune fișier: 1.58 MB
Acesta este un fișier mare. În funcție de viteza conexiunii, descărcarea poate dura mai mult timp.
Descriere format:
This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.
Pentru a asigura integritatea descărcării, verificați valoarea cifrei de control.
MD5:
8a20c029150a3ecf6c563575a17db1bc
SHA1:
Not available
SHA-256:
Not available
Format fișier Actualizați pachetul pentru MS Windows pe 32 de biți
Nume fișier: PECC1100_BIOS_WIN_R316289.EXE
Dimensiune fișier: 5.12 MB
Acesta este un fișier mare. În funcție de viteza conexiunii, descărcarea poate dura mai mult timp.
Descriere format:
Dell Update Packages (DUP) in Microsoft Windows 32bit format have been designed to run on Microsoft Windows 64bit Operating Systems. Dell Update Packages (DUP) in Microsoft Windows 64bit format will only run on Microsoft Windows 64bit Operating Systems. When selecting a device driver update be sure to select the one that is appropriate for your operating system.
Pentru a asigura integritatea descărcării, verificați valoarea cifrei de control.
MD5:
BAB18C42EE9B5A17C418FA69BA5DE901
SHA1:
Not available
SHA-256:
Not available
Prin descărcare, acceptați termenii Dell Software License Agreement.
Informații importante
S99C3B22:
- N/A.
S99C3B21:
- Update Intel RC P2.97.
- Get and display FRU string during POST.
S99C3B20:
- Add to support new super I/O W83627DHG-P.
S99C3B19:
- Modify ASPM feature.
- Add LAN scan boot prority by customer requested.
- Update RC code that provided by Intel for DIMM lose issue.
- Modify DF446118: Spelling wrong words happened in BIOS setup utility.
- Add CR455705: add option to select SV for LV DIMM by customer requested.
S99C3B18:
- Update main page in BIOS menu by customer request.
- Follow DELL format to store UUID in SMBIOS by customer request.
- Mask the LV DIMM warning event by customer request.
- Support VGA card by customer requested.
S99C3B17:
- Updated BSU 1.01 SIEW#3451056.
S99C3B16:
- Update microcode.
- Add new DELL system ID for RBU
S99C3B15:
- Update microcode.
- Update Intel RC P2.91.
- Modify ASPM feature.
- Update 10G Mezz version 2.1.60.
S99C3B14:
- Modify there isn't RBU error event when quiet boot option is enabled.
S99C3B13:
- Modify the DELL utility can't get PPID from SMBIOS.
S99C3B12:
- N/A.
S99C3B11:
- Modify the behavior after RUB flash failed between DCS and CE.
S99C3B10:
- Add protection for non-MLK and MLK BIOS update check.
- Add CPU performance option in BIOS menu by customer request.
- Add payload option in BIOS menu by customer request.
S99C3B09:
- Add the product name at BIOS Setup menu.
- Modify the correct memony size during POST.
S99C3B08:
- N/A.
S99C3B07:
- N/A.
S99C3B06:
- Send parity error event log to BMC.
- Add new flash IC support
Note: BIOS update/create by ¡§IC writer¡¨ is necessary for NEW BIOS IC support
since descriptor region with new BIOS IC support will not be updated
by BIOS update utility and it is only created for manufacturer building.
- Modify to support WLK1.5 windows LOGO test(WHEA).
- Support 26 Hard Disk Drives.
S99C3B05:
- Update microcode.
S99C3B04:
- N/A.
S99C3B03:
- Update microcode.
- Update Intel RC P2.70.
- Implement the frequency and volt for 2DPC LVDIMM.
S99C3B02:
- N/A.
S99C3B01:
- Update PCIE slot number information.
- Update Intel RC to e2.50 from p2.1.
- Add one setup option to persiste USB device in the highest boot order.
- Add D4 token for iSCSI option
S99C3B00:
- Update module "Intel - CB: Nehalem" to "Nehalem;8.00.16_CB-NEHALEM_21"
from "Nehalem;8.00.16_CB-NEHALEM_20"
- Update processor module to 8.00.15_CPU-i7_01.09 from 8.00.15_CPU-i7_01.08
- Update Processor Microcode.
- Update Serial Redirection module to 8.00.03_SREDIR_03.01_B10 from 8.00.03_SREDIR_03.01_BETA_9.
- Update ME F/W to SPS_01.01.02.007.0_ProductionUpdate3 from SPS_01.01.00.004.
- Update ME-Core and ME-BSP module to 8.00.14_ME_1.00.22 from 8.00.14_ME_1.00.18.
- Since COMS is not fixed yet, reserve CMOS for futher use.
- Add DF361842 Lack of the "POST NO PXE-capable device available" message in POST (change request).
- Add DF364381 the QPI Frequency options should be hidden with different QPI speed CPUs (change request).
S99C2B03:
- Runtime Mirror event support.
- iMRC error log support.
- Implement the DIMM presence detect retry. (SPD workaround)
- Follow DCS BIOS SPEC 1.5 to add HDD SECURE ERASE support.
- Follow HW design to update strings for CE 1U/2U platforms.
S99C2B02:
- Sync S99C and C99Q code base.
- LV dimm support (Only westmere)
S99C2B01:
- Initial release
- N/A.
S99C3B21:
- Update Intel RC P2.97.
- Get and display FRU string during POST.
S99C3B20:
- Add to support new super I/O W83627DHG-P.
S99C3B19:
- Modify ASPM feature.
- Add LAN scan boot prority by customer requested.
- Update RC code that provided by Intel for DIMM lose issue.
- Modify DF446118: Spelling wrong words happened in BIOS setup utility.
- Add CR455705: add option to select SV for LV DIMM by customer requested.
S99C3B18:
- Update main page in BIOS menu by customer request.
- Follow DELL format to store UUID in SMBIOS by customer request.
- Mask the LV DIMM warning event by customer request.
- Support VGA card by customer requested.
S99C3B17:
- Updated BSU 1.01 SIEW#3451056.
S99C3B16:
- Update microcode.
- Add new DELL system ID for RBU
S99C3B15:
- Update microcode.
- Update Intel RC P2.91.
- Modify ASPM feature.
- Update 10G Mezz version 2.1.60.
S99C3B14:
- Modify there isn't RBU error event when quiet boot option is enabled.
S99C3B13:
- Modify the DELL utility can't get PPID from SMBIOS.
S99C3B12:
- N/A.
S99C3B11:
- Modify the behavior after RUB flash failed between DCS and CE.
S99C3B10:
- Add protection for non-MLK and MLK BIOS update check.
- Add CPU performance option in BIOS menu by customer request.
- Add payload option in BIOS menu by customer request.
S99C3B09:
- Add the product name at BIOS Setup menu.
- Modify the correct memony size during POST.
S99C3B08:
- N/A.
S99C3B07:
- N/A.
S99C3B06:
- Send parity error event log to BMC.
- Add new flash IC support
Note: BIOS update/create by ¡§IC writer¡¨ is necessary for NEW BIOS IC support
since descriptor region with new BIOS IC support will not be updated
by BIOS update utility and it is only created for manufacturer building.
- Modify to support WLK1.5 windows LOGO test(WHEA).
- Support 26 Hard Disk Drives.
S99C3B05:
- Update microcode.
S99C3B04:
- N/A.
S99C3B03:
- Update microcode.
- Update Intel RC P2.70.
- Implement the frequency and volt for 2DPC LVDIMM.
S99C3B02:
- N/A.
S99C3B01:
- Update PCIE slot number information.
- Update Intel RC to e2.50 from p2.1.
- Add one setup option to persiste USB device in the highest boot order.
- Add D4 token for iSCSI option
S99C3B00:
- Update module "Intel - CB: Nehalem" to "Nehalem;8.00.16_CB-NEHALEM_21"
from "Nehalem;8.00.16_CB-NEHALEM_20"
- Update processor module to 8.00.15_CPU-i7_01.09 from 8.00.15_CPU-i7_01.08
- Update Processor Microcode.
- Update Serial Redirection module to 8.00.03_SREDIR_03.01_B10 from 8.00.03_SREDIR_03.01_BETA_9.
- Update ME F/W to SPS_01.01.02.007.0_ProductionUpdate3 from SPS_01.01.00.004.
- Update ME-Core and ME-BSP module to 8.00.14_ME_1.00.22 from 8.00.14_ME_1.00.18.
- Since COMS is not fixed yet, reserve CMOS for futher use.
- Add DF361842 Lack of the "POST NO PXE-capable device available" message in POST (change request).
- Add DF364381 the QPI Frequency options should be hidden with different QPI speed CPUs (change request).
S99C2B03:
- Runtime Mirror event support.
- iMRC error log support.
- Implement the DIMM presence detect retry. (SPD workaround)
- Follow DCS BIOS SPEC 1.5 to add HDD SECURE ERASE support.
- Follow HW design to update strings for CE 1U/2U platforms.
S99C2B02:
- Sync S99C and C99Q code base.
- LV dimm support (Only westmere)
S99C2B01:
- Initial release
Instrucțiuni de instalare
Dell Update Package Instructions for PECC1100_BIOS_LX_R316289.BIN:
Download
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Read over the release information presented by executing the "./PECC1100_BIOS_LX_R316289.BIN --version" command from the shell.
2. Download and install any prerequisites identified in the above step before proceeding.
3. Run the update by executing "./PECC1100_BIOS_LX_R316289.BIN" from the shell.
4. Follow the remaining prompts to perform the update.
Dell Update Package Instructions for PECC1100_BIOS_WIN_R316289.EXE:
Download
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.
GnuPG Signature of Dell Update Package Instructions for PECC1100_BIOS_LX_R316289.BIN.sign:
Download
1. Click the "Download Now" link to download the file.
2. When the "File Download" window appears, click "Save" to save the file to your hard drive.
Installation
1. Import the Dell public key. (You only need to do once on your system.)
2. Verify the Dell Update Package by using its signature file, PECC1100_BIOS_LX_R316289.BIN.sign
Hard Drive Installation (via WinZip) of DOS Utility for R316289_S99C3B22_0462.exe
Download
1.Click the location, e.g. Americas, from which you want to download the file.
2.When the File Download window appears, click Save this program to disk and click OK. The Save In window appears.
3.From the Save In drop-down menu, click to select Desktop and then click Save. The file will download to your desktop.
4.If a Download Complete window appears, click Close. A new icon appears on your desktop.
Install
1. Double-click the new icon on the desktop labeled R316289_S99C3B22_0462.exe.
2. The Self-Extractor window appears and prompts you to extract or unzip to C:\DELL\DRIVERS\R316289. If you did not print these instructions, write down this path. The WinZip Self-Extractor window appears.
3. Click OK.
4. If the Self-Extractor window is still open, close it.
5. Create a DOS boot disk. For more information, refer to Dell Knowledge Base Article TT1014475 ¡V ¡§What can I use for a boot disk with CD-ROM support?¡¨
6. Insert the floppy disk into the floppy drive and reboot the computer.
7. At the A:/> prompt, type C: and then press the [ENTER] key.
8. Type C:\DELL\DRIVERS\R316289 and then press [ENTER].
9. Follow the on-screen instructions.
Download
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Read over the release information presented by executing the "./PECC1100_BIOS_LX_R316289.BIN --version" command from the shell.
2. Download and install any prerequisites identified in the above step before proceeding.
3. Run the update by executing "./PECC1100_BIOS_LX_R316289.BIN" from the shell.
4. Follow the remaining prompts to perform the update.
Dell Update Package Instructions for PECC1100_BIOS_WIN_R316289.EXE:
Download
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.
GnuPG Signature of Dell Update Package Instructions for PECC1100_BIOS_LX_R316289.BIN.sign:
Download
1. Click the "Download Now" link to download the file.
2. When the "File Download" window appears, click "Save" to save the file to your hard drive.
Installation
1. Import the Dell public key. (You only need to do once on your system.)
2. Verify the Dell Update Package by using its signature file, PECC1100_BIOS_LX_R316289.BIN.sign
Hard Drive Installation (via WinZip) of DOS Utility for R316289_S99C3B22_0462.exe
Download
1.Click the location, e.g. Americas, from which you want to download the file.
2.When the File Download window appears, click Save this program to disk and click OK. The Save In window appears.
3.From the Save In drop-down menu, click to select Desktop and then click Save. The file will download to your desktop.
4.If a Download Complete window appears, click Close. A new icon appears on your desktop.
Install
1. Double-click the new icon on the desktop labeled R316289_S99C3B22_0462.exe.
2. The Self-Extractor window appears and prompts you to extract or unzip to C:\DELL\DRIVERS\R316289. If you did not print these instructions, write down this path. The WinZip Self-Extractor window appears.
3. Click OK.
4. If the Self-Extractor window is still open, close it.
5. Create a DOS boot disk. For more information, refer to Dell Knowledge Base Article TT1014475 ¡V ¡§What can I use for a boot disk with CD-ROM support?¡¨
6. Insert the floppy disk into the floppy drive and reboot the computer.
7. At the A:/> prompt, type C: and then press the [ENTER] key.
8. Type C:\DELL\DRIVERS\R316289 and then press [ENTER].
9. Follow the on-screen instructions.
Need help with BIOS issues?
Find a solution in Dell's BIOS troubleshooting and usage guide.Ajutor și tutoriale pentru drivere
Pentru mai multe descărcări, accesați Drivere și descărcări. Pentru ajutor privind utilizarea informațiilor de pe această pagină, accesați Tutoriale și ajutor pentru drivere.