PowerConnect,M8024S,M8024,V4.2.2.3,A26
Este necesară repornirea INSTALATE AUTOMAT Acest fișier a fost instalat automat ca parte a unei actualizări recente. Dacă întâmpinați orice probleme, puteți descărca și reinstala manual.Conținutul acestei pagini este posibil să fi fost tradus automat. Pentru a furniza feedback, completați formularul din partea de jos a paginii.
This firmware release is a maintenance release for the M8024 and M8024S version of PowerConnect switches and includes only bug fixes that are applicable to this switch or possibly other switch models as noted in the Fixes and Enhancements section.
Recomandate
Găsiți cea mai bună descărcare pentru sistemul dvs.
Introduceți detaliile produsului pentru a vedea cele mai recente informații despre driverele sistemului dvs.Asistență căutare
Introduceți eticheta de service Dell sau modelul
Doriți să vă căutați produsul? Introduceți un identificator de produs. Arătați-mi cum
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Conectați-vă la Windows ca administrator pentru a utiliza scanarea automată. Dacă sunteți deja conectat ca administrator și vedeți acest mesaj, reporniți sistemul. Sistemul dvs. este gestionat de către administratorul IT, iar caracteristicile pot fi limitate.
Găsiți mai multe actualizări. Utilizați SupportAssist pentru a găsi cele mai recente actualizări ale driverelor pentru dispozitivul dvs.
Fixes & Enhancements
This is a maintenance release so only bug fixes are included.
Fixes:
- IP routing unexpectedly after reboot despite its not having been enabled.
- Telnet existing session is interrupted when "New Telnet Sessions" is set to "Block".
- OOB interface unreachable after failover.
- Switch CLI help does not locate the 'initiate failover' command properly.
- Timeout during SNMP walk on root
- "show interfaces switchport" command shows incorrect General Mode Tagged VLANs value
- Error while adding an access-list to an access-group
- Walk of agentDaiVlanStatsTable returns statistics for all the 4096 VLANs
- OOB interface configured with default IP via Setup Wizard incorrectly.
- Unable to create VLAN ID and name VLAN in Web GUI
- "Failed to get CPU cosq 0 drop counters, error -16" messages in logs
- Default "ip address dhcp" command on VLAN 1 causing "failed to bind socket" error repeatedly
- agentPortSpeedDuplexStatus SNMP MIB object documentation error
- ifIndiscards is still counting VLANdiscards if the interface switchport mode is in trunk mode
- Switch doesn't register all the 576 devices if LLDP-MED has all the optional TLVs.
- SNMP and LOG errors when setting ifAdminStatus
- Cannot type input into external serial connector after reboot of switch
- Web GUI doesn't display port 24 if using Internet Explorer 9
- Switchport general configuration, VLAN1 tagged not saved in running config
- Cannot rename vlan1
- SNMP Port tag/untag issue
- DNS client error in logs and switch locks up and needs to be rebooted.
- Terminal Length setting not working as in 4.1
- Trunk port multiple vlan assignment doesn't work properly after reboot
- FIP snooping session is not getting established after script apply.
- "ip http secure-server" command not getting migrated from 4.1.0.19 build to 4.2.1.3 build.
- Data loop in Simple mode when adding VLAN
Citiți mai multeFixes:
- IP routing unexpectedly after reboot despite its not having been enabled.
- Telnet existing session is interrupted when "New Telnet Sessions" is set to "Block".
- OOB interface unreachable after failover.
- Switch CLI help does not locate the 'initiate failover' command properly.
- Timeout during SNMP walk on root
- "show interfaces switchport" command shows incorrect General Mode Tagged VLANs value
- Error while adding an access-list to an access-group
- Walk of agentDaiVlanStatsTable returns statistics for all the 4096 VLANs
- OOB interface configured with default IP via Setup Wizard incorrectly.
- Unable to create VLAN ID and name VLAN in Web GUI
- "Failed to get CPU cosq 0 drop counters, error -16" messages in logs
- Default "ip address dhcp" command on VLAN 1 causing "failed to bind socket" error repeatedly
- agentPortSpeedDuplexStatus SNMP MIB object documentation error
- ifIndiscards is still counting VLANdiscards if the interface switchport mode is in trunk mode
- Switch doesn't register all the 576 devices if LLDP-MED has all the optional TLVs.
- SNMP and LOG errors when setting ifAdminStatus
- Cannot type input into external serial connector after reboot of switch
- Web GUI doesn't display port 24 if using Internet Explorer 9
- Switchport general configuration, VLAN1 tagged not saved in running config
- Cannot rename vlan1
- SNMP Port tag/untag issue
- DNS client error in logs and switch locks up and needs to be rebooted.
- Terminal Length setting not working as in 4.1
- Trunk port multiple vlan assignment doesn't work properly after reboot
- FIP snooping session is not getting established after script apply.
- "ip http secure-server" command not getting migrated from 4.1.0.19 build to 4.2.1.3 build.
- Data loop in Simple mode when adding VLAN
Versiune
v4.2.2.3, A26
Data lansării:
11 mai 2012
Tip de descărcare
Firmware
Categorie
Rețea
Importanță
RecommendedDell Technologies recomandă aplicarea acestei actualizări în următorul ciclu de actualizare programat. Actualizarea conține modificări pentru menținerea stării generale de funcționare a sistemului. Acesta asigură faptul că software-ul sistemului rămâne actual și compatibil cu alte module de sistem (firmware, BIOS, drivere și software) și poate include alte caracteristici noi.
Formate disponibile View Important Information
Format fișier Extrage fișiere direct pe discul local
Nume fișier: PCM8024v4.2.2.3a26.zip
Dimensiune fișier: 20.01 MB
Acesta este un fișier mare. În funcție de viteza conexiunii, descărcarea poate dura mai mult timp.
Descriere format:
This file format consists of an archive of files that may be decompressed to a directory on the hard drive. The installation can then be done from that directory.
Pentru a asigura integritatea descărcării, verificați valoarea cifrei de control.
MD5:
af756a9424e71dc7ff36a6e1391fae5c
SHA1:
4092c893d92bdc96e26a95203601a53b1e78b98d
SHA-256:
Not available
Format fișier A text file containing customer friendly fixes and enhancements information
Nume fișier: PCM8024ReadMev4.2.2.3a26.txt
Dimensiune fișier: 3.57 KB
Acesta este un fișier mare. În funcție de viteza conexiunii, descărcarea poate dura mai mult timp.
Descriere format:
This file format contains plain text which can be viewed with a standard text editor.
Pentru a asigura integritatea descărcării, verificați valoarea cifrei de control.
MD5:
3eed014340766b6681f2959bfd9bf6cd
SHA1:
ad544b16717900926f6385a122c22b66592bfad4
SHA-256:
Not available
Prin descărcare, acceptați termenii Dell Software License Agreement.
Informații importante
NOTE: Please follow software update instructions included in the zip file.
"Upgrading PowerConnect Switches from version 4.x.x.x to 4.2.2.3 firmware.pdf"
"Upgrading PowerConnect Switches from version 2.x.x.x or 3.x.x.x to 4.2.2.3 firmware.pdf"
NOTE: Release 4.2.2.3 Software zip file included with an A.1.1.9 firmware version. Only use this A.1.1.9 firmware version to upgrade switches from 2.x.x.x or 3.x.x.x to 4.2.2.3 firmware.
"Upgrading PowerConnect Switches from version 4.x.x.x to 4.2.2.3 firmware.pdf"
"Upgrading PowerConnect Switches from version 2.x.x.x or 3.x.x.x to 4.2.2.3 firmware.pdf"
NOTE: Release 4.2.2.3 Software zip file included with an A.1.1.9 firmware version. Only use this A.1.1.9 firmware version to upgrade switches from 2.x.x.x or 3.x.x.x to 4.2.2.3 firmware.
Instrucțiuni de instalare
NOTE: Please follow software update instructions included in the zip file.
"Upgrading PowerConnect Switches from version 4.x.x.x to 4.2.2.3 firmware.pdf"
"Upgrading PowerConnect Switches from version 2.x.x.x or 3.x.x.x to 4.2.2.3 firmware.pdf"
NOTE: Release 4.2.2.3 Software zip file included with an A.1.1.9 firmware version. Only use this A.1.1.9 firmware version to upgrade switches from 2.x.x.x or 3.x.x.x to 4.2.2.3 firmware.
"Upgrading PowerConnect Switches from version 4.x.x.x to 4.2.2.3 firmware.pdf"
"Upgrading PowerConnect Switches from version 2.x.x.x or 3.x.x.x to 4.2.2.3 firmware.pdf"
NOTE: Release 4.2.2.3 Software zip file included with an A.1.1.9 firmware version. Only use this A.1.1.9 firmware version to upgrade switches from 2.x.x.x or 3.x.x.x to 4.2.2.3 firmware.
Need help with network connection issues?
Find a solution in Dell's network troubleshooting and usage guide.Ajutor și tutoriale pentru drivere
Pentru mai multe descărcări, accesați Drivere și descărcări. Pentru ajutor privind utilizarea informațiilor de pe această pagină, accesați Tutoriale și ajutor pentru drivere.