Do not turn off your computer or disconnect from the power source while updating the BIOS as this could harm your computer. During the update, your computer will restart and you may briefly see a black screen.
Before updating, please read the installation instructions and important information noted below.
OptiPlex 7010 System BIOS
Este necesară repornirea INSTALATE AUTOMAT Acest fișier a fost instalat automat ca parte a unei actualizări recente. Dacă întâmpinați orice probleme, puteți descărca și reinstala manual.Conținutul acestei pagini este posibil să fi fost tradus automat. Pentru a furniza feedback, completați formularul din partea de jos a paginii.
Dell OptiPlex 7010 System BIOS
Recomandate
Găsiți cea mai bună descărcare pentru sistemul dvs.
Introduceți detaliile produsului pentru a vedea cele mai recente informații despre driverele sistemului dvs.Asistență căutare
Introduceți eticheta de service Dell sau modelul
Doriți să vă căutați produsul? Introduceți un identificator de produs. Arătați-mi cum
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Conectați-vă la Windows ca administrator pentru a utiliza scanarea automată. Dacă sunteți deja conectat ca administrator și vedeți acest mesaj, reporniți sistemul. Sistemul dvs. este gestionat de către administratorul IT, iar caracteristicile pot fi limitate.
Găsiți mai multe actualizări. Utilizați SupportAssist pentru a găsi cele mai recente actualizări ale driverelor pentru dispozitivul dvs.
Fixes & Enhancements
WARNING: If the Dell Data Protection | Encryption Full Volume Encryption is deployed in the current system, Do Not Update BIOS to this BIOS release.
This BIOS update will cause systems deployed with DDPE FVE encryption to become unusable. Back flashing the BIOS to previous version and DDPE recovery steps will be required to recover data.
1.Fixed system cannot boot from add-on LAN devices.
2.Fixed USB device cannot recognize in BIOS menu.
3.Addressed unexpected string/logo shows in POST.
4.Addressed CCTK issues.
5.Addressed boot sequence issue.
6.Addressed incorrect LAN/Graphic status in BIOS.
7.Change USB wakeup default setting to enabled.
8.Updated newer CPU Microcode patch.
Citiți mai multeThis BIOS update will cause systems deployed with DDPE FVE encryption to become unusable. Back flashing the BIOS to previous version and DDPE recovery steps will be required to recover data.
1.Fixed system cannot boot from add-on LAN devices.
2.Fixed USB device cannot recognize in BIOS menu.
3.Addressed unexpected string/logo shows in POST.
4.Addressed CCTK issues.
5.Addressed boot sequence issue.
6.Addressed incorrect LAN/Graphic status in BIOS.
7.Change USB wakeup default setting to enabled.
8.Updated newer CPU Microcode patch.
Versiune
A09, A09
Data lansării:
26 oct. 2012
Tip de descărcare
Interfața BIOS
Categorie
BIOS
Importanță
RecommendedDell Technologies recomandă aplicarea acestei actualizări în următorul ciclu de actualizare programat. Actualizarea conține modificări pentru menținerea stării generale de funcționare a sistemului. Acesta asigură faptul că software-ul sistemului rămâne actual și compatibil cu alte module de sistem (firmware, BIOS, drivere și software) și poate include alte caracteristici noi.
Formate disponibile View Important Information
Format fișier Flash BIOS executable
Nume fișier: O7010A09.exe
Dimensiune fișier: 8.03 MB
Acesta este un fișier mare. În funcție de viteza conexiunii, descărcarea poate dura mai mult timp.
Descriere format:
This file format consists of a BIOS-executable file. To use it, download the file and copy it to a DOS-bootable USB flash drive, then boot the system to the USB flash drive and run the program.
Pentru a asigura integritatea descărcării, verificați valoarea cifrei de control.
MD5:
3eb1b42289d26bf991deff0d6757e3b7
SHA1:
db208875bff9e9d2922f63975ba871700f23be8c
SHA-256:
b4c3ff10bed981fbbc97691eeb78d6a7968c6d77d2dfedd96ded14fa9f2fb557
Prin descărcare, acceptați termenii Dell Software License Agreement.
Informații importante
Upgrading and Downgrading between Pre-Win8 BIOS Images and Win8 Feature Enhanced BIOS Images.
Upgrading:
The new Win8 Released BIOS contains new features and behavior, but the upgrade process for the end user is still unchanged. Simply run the EXE application normally and the BIOS will handle incorporating the new features and logic with your current settings. After the upgrade, you will immediately see that one of the visible changes is to the logo screen during boot, which only displays the logo at a larger size with no other information or text.
Downgrading:
Once a machine has a Win8 Released BIOS running on it, downgrading to a Pre-Win8 Released BIOS requires removing some unique functionality and security enhancements that are only present in a Win8 Released BIOS. This downgrade process described here is specific to Win8 Released BIOS to Pre-Win8 Released BIOS transitions ONLY, and does not affect the normal rules/operations for downgrades of Pre-Win8 Released BIOS to an older Pre-Win8 Released BIOS, or Win8 Released BIOS to an older Win8 Released BIOS.
To install a Pre-Win8 Released BIOS on a machine running a Win8 Released BIOS, you will still use the same EXE application released for the BIOS version you wish to go to. When in Windows or DOS, your interaction with the application will be the same, but upon the machine restarting in order to do the update you will be prompted to accept the actions required in order to downgrade the machine and then prompted enter your admin password (if set). These prompts can not be accepted remotely and must be accepted by using an attached or built-in keyboard.
Due to compatibility of features, and ensuring platform stability, the only way to downgrade is to reset all the settings in the machine to a default factory state as if it had been shipped with a Pre-Win8 Released BIOS; specifically including defaulting the boot mode to Legacy (not UEFI), removing all passwords, and defaulting all user selectable settings. The following is retained on the machine (all other settings are reset): Windows Keys (if present), Service Tag, Asset Tag, Ownership Tag, Manufacturing Date, Ownership Date, and Express Service Code.
Downgrading is blocked if either Secure Boot is on or if Computrace has been activated. Due to security rules and protecting our machines from malicious attacks, if a user wishes to downgrade he/she must first ensure both of these are disabled or off. (Machines that are shipped out of the factory with Win8 Operating System are required to have Secure Boot initially on.)
After running the application, accepting the downgrading conditions prompts after restart, and the BIOS downgrading process is finished, the platform will be operating with the Pre-Win8 Released BIOS you desired. You may then go to the Firmware Setup to change settings and configure the machine as needed.
Quickly Identifying if You Have a Win8 Released BIOS Installed:
To quickly tell if a machine has a Win8 ReleasedBIOS on it, check if the boot screen does not display the model name and BIOS version under the logo. This information, model name and BIOS version, are now found in the F12 menu on a Win8 BIOS.
Upgrading:
The new Win8 Released BIOS contains new features and behavior, but the upgrade process for the end user is still unchanged. Simply run the EXE application normally and the BIOS will handle incorporating the new features and logic with your current settings. After the upgrade, you will immediately see that one of the visible changes is to the logo screen during boot, which only displays the logo at a larger size with no other information or text.
Downgrading:
Once a machine has a Win8 Released BIOS running on it, downgrading to a Pre-Win8 Released BIOS requires removing some unique functionality and security enhancements that are only present in a Win8 Released BIOS. This downgrade process described here is specific to Win8 Released BIOS to Pre-Win8 Released BIOS transitions ONLY, and does not affect the normal rules/operations for downgrades of Pre-Win8 Released BIOS to an older Pre-Win8 Released BIOS, or Win8 Released BIOS to an older Win8 Released BIOS.
To install a Pre-Win8 Released BIOS on a machine running a Win8 Released BIOS, you will still use the same EXE application released for the BIOS version you wish to go to. When in Windows or DOS, your interaction with the application will be the same, but upon the machine restarting in order to do the update you will be prompted to accept the actions required in order to downgrade the machine and then prompted enter your admin password (if set). These prompts can not be accepted remotely and must be accepted by using an attached or built-in keyboard.
Due to compatibility of features, and ensuring platform stability, the only way to downgrade is to reset all the settings in the machine to a default factory state as if it had been shipped with a Pre-Win8 Released BIOS; specifically including defaulting the boot mode to Legacy (not UEFI), removing all passwords, and defaulting all user selectable settings. The following is retained on the machine (all other settings are reset): Windows Keys (if present), Service Tag, Asset Tag, Ownership Tag, Manufacturing Date, Ownership Date, and Express Service Code.
Downgrading is blocked if either Secure Boot is on or if Computrace has been activated. Due to security rules and protecting our machines from malicious attacks, if a user wishes to downgrade he/she must first ensure both of these are disabled or off. (Machines that are shipped out of the factory with Win8 Operating System are required to have Secure Boot initially on.)
After running the application, accepting the downgrading conditions prompts after restart, and the BIOS downgrading process is finished, the platform will be operating with the Pre-Win8 Released BIOS you desired. You may then go to the Firmware Setup to change settings and configure the machine as needed.
Quickly Identifying if You Have a Win8 Released BIOS Installed:
To quickly tell if a machine has a Win8 ReleasedBIOS on it, check if the boot screen does not display the model name and BIOS version under the logo. This information, model name and BIOS version, are now found in the F12 menu on a Win8 BIOS.
Se aplică pentru
Dell Optiplex 7010
Instrucțiuni de instalare
WARNING: If the Dell Data Protection | Encryption Full Volume Encryption is deployed in the current system, Do Not Update BIOS to this BIOS release.
This BIOS update will cause systems deployed with DDPE FVE encryption to become unusable.
Back flashing the BIOS to previous version and DDPE recovery steps will be required to recover data.
Download file to Desktop
The file O7010A09.exe is using the Universal (Windows/ DOS) format and is designed to be directly executed from Windows environment.
1. Click Download now.The File Download window appears.
2. Click the Save button.The Save As window appears.
3. Select Desktop using the drop-down menu to the right of Save in.
4. Click the Save button.A progress meter moves as the download is completed.
5. If necessary, click X in the upper right-hand corner of the Download Progress Window to close it upon completion.
NOTE: Shut down all other applications prior to running the BIOS update utility. The update utility reboots your system in order to
get the new BIOS loaded.
--------------------------------------------------------------------------------
Run the BIOS update utility from Windows environment
1. Double click the Icon on your desktop labeled O7010A09.exe.The Dell BIOS Flash window appears
2. Click the Continue button.The message Pressing OK will close all applications, shut down Windows,
Flash the BIOS, then reboot. appears.
3. Click the OK button.The system will restart and the BIOS Flash will be completed.
Run the BIOS update utility from DOS environment (Non-Windows users)
NOTE: You will need to provide a bootable DOS diskette. This executable file does not create the DOS system files.
1. Copy the file O7010A09.exe to a bootable USB key.
2. Boot from the USB key to the DOS prompt.
3. Run the file by typing Y:\O7010A09.exe (where y is the drive letter where the executable is located).
--------------------------------------------------------------------------------
Note: Please make sure you suspend BitLocker encryption before updating BIOS on a BitLocker enabled system.
If you doesn't enable BitLocker on your system you can ignore it.
This BIOS update will cause systems deployed with DDPE FVE encryption to become unusable.
Back flashing the BIOS to previous version and DDPE recovery steps will be required to recover data.
Download file to Desktop
The file O7010A09.exe is using the Universal (Windows/ DOS) format and is designed to be directly executed from Windows environment.
1. Click Download now.The File Download window appears.
2. Click the Save button.The Save As window appears.
3. Select Desktop using the drop-down menu to the right of Save in.
4. Click the Save button.A progress meter moves as the download is completed.
5. If necessary, click X in the upper right-hand corner of the Download Progress Window to close it upon completion.
NOTE: Shut down all other applications prior to running the BIOS update utility. The update utility reboots your system in order to
get the new BIOS loaded.
--------------------------------------------------------------------------------
Run the BIOS update utility from Windows environment
1. Double click the Icon on your desktop labeled O7010A09.exe.The Dell BIOS Flash window appears
2. Click the Continue button.The message Pressing OK will close all applications, shut down Windows,
Flash the BIOS, then reboot. appears.
3. Click the OK button.The system will restart and the BIOS Flash will be completed.
Run the BIOS update utility from DOS environment (Non-Windows users)
NOTE: You will need to provide a bootable DOS diskette. This executable file does not create the DOS system files.
1. Copy the file O7010A09.exe to a bootable USB key.
2. Boot from the USB key to the DOS prompt.
3. Run the file by typing Y:\O7010A09.exe (where y is the drive letter where the executable is located).
--------------------------------------------------------------------------------
Note: Please make sure you suspend BitLocker encryption before updating BIOS on a BitLocker enabled system.
If you doesn't enable BitLocker on your system you can ignore it.
Need help with BIOS issues?
Find a solution in Dell's BIOS troubleshooting and usage guide.Ajutor și tutoriale pentru drivere
Pentru mai multe descărcări, accesați Drivere și descărcări. Pentru ajutor privind utilizarea informațiilor de pe această pagină, accesați Tutoriale și ajutor pentru drivere.