LSI Logic PERC 4e/DC Firmware Update
Este necesară repornirea INSTALATE AUTOMAT Acest fișier a fost instalat automat ca parte a unei actualizări recente. Dacă întâmpinați orice probleme, puteți descărca și reinstala manual.Conținutul acestei pagini este posibil să fi fost tradus automat. Pentru a furniza feedback, completați formularul din partea de jos a paginii.
This package provides the LSI Logic PERC 4e/DC Firmware Update and is supported on the Enterprise Server models that are running the following Operating System: NA.
Recomandate
Găsiți cea mai bună descărcare pentru sistemul dvs.
Introduceți detaliile produsului pentru a vedea cele mai recente informații despre driverele sistemului dvs.Asistență căutare
Introduceți eticheta de service Dell sau modelul
Doriți să vă căutați produsul? Introduceți un identificator de produs. Arătați-mi cum
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Conectați-vă la Windows ca administrator pentru a utiliza scanarea automată. Dacă sunteți deja conectat ca administrator și vedeți acest mesaj, reporniți sistemul. Sistemul dvs. este gestionat de către administratorul IT, iar caracteristicile pot fi limitate.
Găsiți mai multe actualizări. Utilizați SupportAssist pentru a găsi cele mai recente actualizări ale driverelor pentru dispozitivul dvs.
Fixes & Enhancements
Fixes
- Fixes instability problems while manually running Patrol Read in a cluster environment.
- Fixed an issue where OS does not boot if installed with some specific disk geometry (CHS) considerations (for example: 32sec/track size).
- Reduced the maximum patrol read command transfer sizes to improve system performance during Patrol Read
Enhancements
- N/A
Citiți mai multe- Fixes instability problems while manually running Patrol Read in a cluster environment.
- Fixed an issue where OS does not boot if installed with some specific disk geometry (CHS) considerations (for example: 32sec/track size).
- Reduced the maximum patrol read command transfer sizes to improve system performance during Patrol Read
Enhancements
- N/A
Versiune
5B2D, A18
Data lansării:
12 dec. 2013
Tip de descărcare
Firmware
Categorie
Configurații RAID pentru SCSI
Importanță
RecommendedDell Technologies recomandă aplicarea acestei actualizări în următorul ciclu de actualizare programat. Actualizarea conține modificări pentru menținerea stării generale de funcționare a sistemului. Acesta asigură faptul că software-ul sistemului rămâne actual și compatibil cu alte module de sistem (firmware, BIOS, drivere și software) și poate include alte caracteristici noi.
Formate disponibile View Important Information
Format fișier Actualizați pachetul pentru MS Windows pe 32 de biți
Nume fișier: RAID_FRMW_WIN_R186638.EXE
Dimensiune fișier: 5.15 MB
Acesta este un fișier mare. În funcție de viteza conexiunii, descărcarea poate dura mai mult timp.
Descriere format:
Dell Update Packages (DUP) in Microsoft Windows 32bit format have been designed to run on Microsoft Windows 64bit Operating Systems. Dell Update Packages (DUP) in Microsoft Windows 64bit format will only run on Microsoft Windows 64bit Operating Systems. When selecting a device driver update be sure to select the one that is appropriate for your operating system.
Pentru a asigura integritatea descărcării, verificați valoarea cifrei de control.
MD5:
84C0CFF9C24783622638A6CCE7700E5D
SHA1:
Not available
SHA-256:
Not available
Format fișier One or more self extracting disk images inside of a self extracting zip
Nume fișier: BR186638.exe
Dimensiune fișier: 1.25 MB
Acesta este un fișier mare. În funcție de viteza conexiunii, descărcarea poate dura mai mult timp.
Descriere format:
This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, then double-click it to unzip the set of files. Follow the instructions to complete the installation.
Pentru a asigura integritatea descărcării, verificați valoarea cifrei de control.
MD5:
83ba361d4171bbffa654ae2c44d2bb01
SHA1:
Not available
SHA-256:
Not available
Format fișier A GnuPG file which contains a cryptographic signature
Nume fișier: RAID_FRMW_LX_R186638.BIN.sign
Dimensiune fișier: 194 Bytes
Acesta este un fișier mare. În funcție de viteza conexiunii, descărcarea poate dura mai mult timp.
Descriere format:
The GnuPG signature for Red Hat Linux Update Package can be used to authenticate Dell's identity in the correlated Red Hat Linux Update Package.
Pentru a asigura integritatea descărcării, verificați valoarea cifrei de control.
MD5:
59B9EAF0F26DA85699562F5F0769364E
SHA1:
Not available
SHA-256:
Not available
Format fișier External release notes
Nume fișier: perc4e-FWDC5B2D_A18.txt
Dimensiune fișier: 11.08 KB
Acesta este un fișier mare. În funcție de viteza conexiunii, descărcarea poate dura mai mult timp.
Descriere format:
This file format contains plain text which can be viewed with a standard text editor.
Pentru a asigura integritatea descărcării, verificați valoarea cifrei de control.
MD5:
97a82901c462234b7591236e76b9f529
SHA1:
Not available
SHA-256:
Not available
Format fișier Update Package for Red Hat Linux
Nume fișier: RAID_FRMW_LX_R186638.BIN
Dimensiune fișier: 11.05 MB
Acesta este un fișier mare. În funcție de viteza conexiunii, descărcarea poate dura mai mult timp.
Descriere format:
Dell Update Packages for Linux can be used as stand-alone applications that ensure that specific validation criteria are met, then apply an update.
Note: Update Packages for Linux are open source. See the Dell Update Packages for Linux Readme for details.
Note: Update Packages for Linux are open source. See the Dell Update Packages for Linux Readme for details.
Pentru a asigura integritatea descărcării, verificați valoarea cifrei de control.
MD5:
95FDB82C20C6FE90771EBE794CE92303
SHA1:
Not available
SHA-256:
Not available
Prin descărcare, acceptați termenii Dell Software License Agreement.
Informații importante
1. After installing this firmware and rebooting, a consistency check will automatically begin on RAID 5 and 50 virtual disks with 5 or more physical disks to ensure parity information is correct.
2. The consistency check cannot be terminated and will resume at its last point following a reboot.
3. This consistency check will appear as a Background Initialization but will only perform a consistency check with no data being modified.
4. The consistency check runs in the background, allowing the virtual disks to remain accessible during the check.
5. While this background check is designed to minimize performance impact, some degradation in performance may occur until the check is complete, especially under heavy I/O.
2. The consistency check cannot be terminated and will resume at its last point following a reboot.
3. This consistency check will appear as a Background Initialization but will only perform a consistency check with no data being modified.
4. The consistency check runs in the background, allowing the virtual disks to remain accessible during the check.
5. While this background check is designed to minimize performance impact, some degradation in performance may occur until the check is complete, especially under heavy I/O.
Sisteme de operare acceptate
Nu se aplică
Instrucțiuni de instalare
Performing the Firmware Upgrade
Webpack Instructions:
-------
This program creates a bootable diskette to upgrade the firmware of the controllers. You will need a formatted 3 1/2 inch floppy diskette for the following procedure.
1. Download the file to a directory on your hard drive. The file downloaded is a self extracting executable.
2. Insert a blank diskette into the system's diskette drive.
3. Double click on the file that you downloaded and follow the instructions on the screen to extract the files to the diskette.
4. Insert the diskette into the system with the RAID controller for which you want to update the firmware and boot the system.
5. Follow the instructions on the screen to update the firmware.
NOTICE: Pflash.exe will be executed automatically and will report existing code level and prompt you to reconfirm before starting the firmware upgrade process.
To perform this process in non-interactive mode please execute, Pflash /? and read about possible command line switches.
6. Remove the diskette and reboot the system.
Windows Update Package Instructions:
-----------
Download
1. Click the "Download Now" link to download the file.
2. If the Export Compliance Disclaimer window appears, click the "I agree" link to accept the agreement.
3. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Install any necessary Embedded Systems Management firmware prior to this BIOS update.
5. Click the Install button.
6. Follow the remaining prompts to perform the update.
The Update Package can also be used with Dell OpenManage Server Administrator. See the Dell Update Package User's Guide for more information.
Webpack Instructions:
-------
This program creates a bootable diskette to upgrade the firmware of the controllers. You will need a formatted 3 1/2 inch floppy diskette for the following procedure.
1. Download the file to a directory on your hard drive. The file downloaded is a self extracting executable.
2. Insert a blank diskette into the system's diskette drive.
3. Double click on the file that you downloaded and follow the instructions on the screen to extract the files to the diskette.
4. Insert the diskette into the system with the RAID controller for which you want to update the firmware and boot the system.
5. Follow the instructions on the screen to update the firmware.
NOTICE: Pflash.exe will be executed automatically and will report existing code level and prompt you to reconfirm before starting the firmware upgrade process.
To perform this process in non-interactive mode please execute, Pflash /? and read about possible command line switches.
6. Remove the diskette and reboot the system.
Windows Update Package Instructions:
-----------
Download
1. Click the "Download Now" link to download the file.
2. If the Export Compliance Disclaimer window appears, click the "I agree" link to accept the agreement.
3. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Install any necessary Embedded Systems Management firmware prior to this BIOS update.
5. Click the Install button.
6. Follow the remaining prompts to perform the update.
The Update Package can also be used with Dell OpenManage Server Administrator. See the Dell Update Package User's Guide for more information.
Ajutor și tutoriale pentru drivere
Pentru mai multe descărcări, accesați Drivere și descărcări. Pentru ajutor privind utilizarea informațiilor de pe această pagină, accesați Tutoriale și ajutor pentru drivere.