Windows Embedded Standard 7 - WDM
Este necesară repornirea INSTALATE AUTOMAT Acest fișier a fost instalat automat ca parte a unei actualizări recente. Dacă întâmpinați orice probleme, puteți descărca și reinstala manual.Conținutul acestei pagini este posibil să fi fost tradus automat. Pentru a furniza feedback, completați formularul din partea de jos a paginii.
Windows Embedded Standard 7 Image for installation on the Dell OptiPlex FX170 using the Dell Wyse USB Firmware Tool. This image for the FX170 thin client has been created for use with Dell Wyse Device Manager (WDM) and will not work with previous management tools.
Recomandate
Găsiți cea mai bună descărcare pentru sistemul dvs.
Introduceți detaliile produsului pentru a vedea cele mai recente informații despre driverele sistemului dvs.Asistență căutare
Introduceți eticheta de service Dell sau modelul
Doriți să vă căutați produsul? Introduceți un identificator de produs. Arătați-mi cum
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Conectați-vă la Windows ca administrator pentru a utiliza scanarea automată. Dacă sunteți deja conectat ca administrator și vedeți acest mesaj, reporniți sistemul. Sistemul dvs. este gestionat de către administratorul IT, iar caracteristicile pot fi limitate.
Găsiți mai multe actualizări. Utilizați SupportAssist pentru a găsi cele mai recente actualizări ale driverelor pentru dispozitivul dvs.
Fixes & Enhancements
Image Contents:
Internet Explorer 9
Windows Media Player 12
RDP 6.2.9200
VMware View 5.2 client
Silverlight 5.1
.NET Framework 4
Flash Player 11 Active X
Flash Player 11 Plugin
Wide Win32 application support
Tight VNC 2.5.2
WDM hAgent 6.0.0
Citrix Receiver Enterprise 3.3
Citiți mai multeInternet Explorer 9
Windows Media Player 12
RDP 6.2.9200
VMware View 5.2 client
Silverlight 5.1
.NET Framework 4
Flash Player 11 Active X
Flash Player 11 Plugin
Wide Win32 application support
Tight VNC 2.5.2
WDM hAgent 6.0.0
Citrix Receiver Enterprise 3.3
Versiune
A03
Data lansării:
20 feb. 2013
Tip de descărcare
Sisteme de operare
Categorie
Sistem de operare
Importanță
RecommendedDell Technologies recomandă aplicarea acestei actualizări în următorul ciclu de actualizare programat. Actualizarea conține modificări pentru menținerea stării generale de funcționare a sistemului. Acesta asigură faptul că software-ul sistemului rămâne actual și compatibil cu alte module de sistem (firmware, BIOS, drivere și software) și poate include alte caracteristici noi.
Formate disponibile View Important Information
Format fișier Firmware Images
Nume fișier: WES7_20130123.exe
Dimensiune fișier: 3.9 GB
Acesta este un fișier mare. În funcție de viteza conexiunii, descărcarea poate dura mai mult timp.
Descriere format:
Pentru a asigura integritatea descărcării, verificați valoarea cifrei de control.
MD5:
67c1f09a79a14ce61c0c0e9f6b59e324
SHA1:
7acb9aa3eee93892d99e1b9854546a17abfafc93
SHA-256:
b84d4fd5f402f41587878010b954a5cf797ea87566402335a0586190658075d8
Prin descărcare, acceptați termenii Dell Software License Agreement.
Informații importante
Download MD5: 67C1F09A79A14CE61C0C0E9F6B59E324
This image for the FX170 thin client has been created for use with Dell Wyse Device Manager (WDM) and will not work with previous management tools. Details for WDM can be found at:
http://www.wyse.com/products/software/management/WDM
WDM Workgroup Edition is available for free to FX170 customers and can be downloaded at:
https://appservices.wyse.com/pages/serviceandsupport/support/dlOraFW.asp?which=89&model=Wyse%20Device%20Manager(Software Downloads)
Initial deployment of this image must be done using the Dell Wyse USB Firmware Tool version 1.18.05 or above and will not work with previous deployment tools. The USB firmware tool and use instructions can be found at:
https://appservices.wyse.com/pages/serviceandsupport/support/dlOraFW.asp?which=102&model=USB%20Firmware%20Tool
Known Issues:
Before installing Asian MUI packs (Japanese, Korean, Traditional Chinese, Simplified Chinese), some applications need to be removed based on the following instructions:
1) Log in as an Administrator
2) Turn off the File Based Write Filter (FBWF)
3) After reboot, login as the Administrator again
4) Open Start - Control Panel - Add/Remove Programs
5) Uninstall programs in the following order to free up enough space to install the MUI packs - (Try installation of the MUI pack after each uninstallation and document which programs need to be uninstalled for each MUI pack.)
Silverlight
VMWare View client
Citrix Receiver
Flash
.net - This one could cause reinstallation size issues, so this should only be uninstalled if absolutely needed.
6) Install MUI Pack when enough space has been freed
7) Manually reinstall all packages that were uninstalled
8) After completing changes to the image, turn the FBWF on.
This image for the FX170 thin client has been created for use with Dell Wyse Device Manager (WDM) and will not work with previous management tools. Details for WDM can be found at:
http://www.wyse.com/products/software/management/WDM
WDM Workgroup Edition is available for free to FX170 customers and can be downloaded at:
https://appservices.wyse.com/pages/serviceandsupport/support/dlOraFW.asp?which=89&model=Wyse%20Device%20Manager(Software Downloads)
Initial deployment of this image must be done using the Dell Wyse USB Firmware Tool version 1.18.05 or above and will not work with previous deployment tools. The USB firmware tool and use instructions can be found at:
https://appservices.wyse.com/pages/serviceandsupport/support/dlOraFW.asp?which=102&model=USB%20Firmware%20Tool
Known Issues:
Before installing Asian MUI packs (Japanese, Korean, Traditional Chinese, Simplified Chinese), some applications need to be removed based on the following instructions:
1) Log in as an Administrator
2) Turn off the File Based Write Filter (FBWF)
3) After reboot, login as the Administrator again
4) Open Start - Control Panel - Add/Remove Programs
5) Uninstall programs in the following order to free up enough space to install the MUI packs - (Try installation of the MUI pack after each uninstallation and document which programs need to be uninstalled for each MUI pack.)
Silverlight
VMWare View client
Citrix Receiver
Flash
.net - This one could cause reinstallation size issues, so this should only be uninstalled if absolutely needed.
6) Install MUI Pack when enough space has been freed
7) Manually reinstall all packages that were uninstalled
8) After completing changes to the image, turn the FBWF on.
Sisteme de operare acceptate
Windows Embedded
Se aplică pentru
INFO,OS,WES7,ENG
Instrucțiuni de instalare
Initial deployment of this image must be done using the Dell Wyse USB Firmware Tool version 1.18.05 or above and will not work with previous deployment tools. The USB firmware tool and use instructions can be found at:
https://appservices.wyse.com/pages/serviceandsupport/support/dlOraFW.asp?which=102&model=USB%20Firmware%20Tool
https://appservices.wyse.com/pages/serviceandsupport/support/dlOraFW.asp?which=102&model=USB%20Firmware%20Tool
Ajutor și tutoriale pentru drivere
Pentru mai multe descărcări, accesați Drivere și descărcări. Pentru ajutor privind utilizarea informațiilor de pe această pagină, accesați Tutoriale și ajutor pentru drivere.