LSI Logic PERC 3/x, 4/x, 4e/x, CERC ATA 100 Driver
Este necesară repornirea INSTALATE AUTOMAT Acest fișier a fost instalat automat ca parte a unei actualizări recente. Dacă întâmpinați orice probleme, puteți descărca și reinstala manual.Conținutul acestei pagini este posibil să fi fost tradus automat. Pentru a furniza feedback, completați formularul din partea de jos a paginii.
This package provides the LSI Logic PERC 3/SC, 4/DC, 4/SC, 4e/DC, CERC ATA 100 Driver and is supported on the Enterprise Servers and Powervault models that are running the following Windows Operating System: Windows Server 2003.
Recomandate
Găsiți cea mai bună descărcare pentru sistemul dvs.
Introduceți detaliile produsului pentru a vedea cele mai recente informații despre driverele sistemului dvs.Asistență căutare
Introduceți eticheta de service Dell sau modelul
Doriți să vă căutați produsul? Introduceți un identificator de produs. Arătați-mi cum
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Conectați-vă la Windows ca administrator pentru a utiliza scanarea automată. Dacă sunteți deja conectat ca administrator și vedeți acest mesaj, reporniți sistemul. Sistemul dvs. este gestionat de către administratorul IT, iar caracteristicile pot fi limitate.
Găsiți mai multe actualizări. Utilizați SupportAssist pentru a găsi cele mai recente actualizări ale driverelor pentru dispozitivul dvs.
Fixes & Enhancements
Fixes
- If the Adapter is set to DEAD, all the IOCTLs sent to the driver will be returned with a special signature 0xEE to identify that the adapter is DEAD and not responding.
- During Bus Reset, the driver issues a call to the F/W and returns without waiting for the call to finish and asks for the next request from OS. This next request got issued to the F/W even before the reset call completed resulting in the reservation conflict. Now the driver does not issue the next command until the reset call to the F/W completes.
- SCSI commands issued to the Dummy Device exposed by the driver was not handled properly. Driver should have rejected all the commands issued to the Dummy Device except for the SCSIOP_INQUIRY and SCSIIO_READ_CAPACITY. This was causing the system to blue screen when using utilities sending SCSI commands to the Dummy Device. This release driver handles all the SCSI commands issued to the driver gracefully.
Enhancements
- N/A
Citiți mai multe- If the Adapter is set to DEAD, all the IOCTLs sent to the driver will be returned with a special signature 0xEE to identify that the adapter is DEAD and not responding.
- During Bus Reset, the driver issues a call to the F/W and returns without waiting for the call to finish and asks for the next request from OS. This next request got issued to the F/W even before the reset call completed resulting in the reservation conflict. Now the driver does not issue the next command until the reset call to the F/W completes.
- SCSI commands issued to the Dummy Device exposed by the driver was not handled properly. Driver should have rejected all the commands issued to the Dummy Device except for the SCSIOP_INQUIRY and SCSIIO_READ_CAPACITY. This was causing the system to blue screen when using utilities sending SCSI commands to the Dummy Device. This release driver handles all the SCSI commands issued to the driver gracefully.
Enhancements
- N/A
Versiune
6.46.2.32, A05
Data lansării:
17 ian. 2014
Tip de descărcare
Driver
Categorie
Configurații RAID pentru SCSI
Importanță
RecommendedDell Technologies recomandă aplicarea acestei actualizări în următorul ciclu de actualizare programat. Actualizarea conține modificări pentru menținerea stării generale de funcționare a sistemului. Acesta asigură faptul că software-ul sistemului rămâne actual și compatibil cu alte module de sistem (firmware, BIOS, drivere și software) și poate include alte caracteristici noi.
Formate disponibile View Important Information
Format fișier Actualizați pachetul pentru MS Windows pe 32 de biți
Nume fișier: RAID_DRVR_WIN_R99970.EXE
Dimensiune fișier: 1.13 MB
Acesta este un fișier mare. În funcție de viteza conexiunii, descărcarea poate dura mai mult timp.
Descriere format:
Dell Update Packages (DUP) in Microsoft Windows 32bit format have been designed to run on Microsoft Windows 64bit Operating Systems. Dell Update Packages (DUP) in Microsoft Windows 64bit format will only run on Microsoft Windows 64bit Operating Systems. When selecting a device driver update be sure to select the one that is appropriate for your operating system.
Pentru a asigura integritatea descărcării, verificați valoarea cifrei de control.
MD5:
41451665696554870A35CC2BDA98613E
SHA1:
Not available
SHA-256:
Not available
Format fișier Extrage fișiere direct pe discul local
Nume fișier: perc-cerc-w2k3-6.46.2.32-A05.exe
Dimensiune fișier: 75 KB
Acesta este un fișier mare. În funcție de viteza conexiunii, descărcarea poate dura mai mult timp.
Descriere format:
This file format consists of an archive of files that may be decompressed to a directory on the hard drive. The installation can then be done from that directory.
Pentru a asigura integritatea descărcării, verificați valoarea cifrei de control.
MD5:
Not available
SHA1:
Not available
SHA-256:
Not available
Format fișier External release notes
Nume fișier: perc-cerc-w2k3-6.46.2.32-A05.txt
Dimensiune fișier: 28.32 KB
Acesta este un fișier mare. În funcție de viteza conexiunii, descărcarea poate dura mai mult timp.
Descriere format:
This file format contains plain text which can be viewed with a standard text editor.
Pentru a asigura integritatea descărcării, verificați valoarea cifrei de control.
MD5:
Not available
SHA1:
Not available
SHA-256:
Not available
Prin descărcare, acceptați termenii Dell Software License Agreement.
Sisteme de operare acceptate
Windows Server 2003
Se aplică pentru
�
CERC ATA 100
PERC 4/DC
PERC 4/SC
PERC3/SC
Instrucțiuni de instalare
Install Instructions
=======
This is a self-extracting package of the Windows 2000 and 2003 device driver installation diskette for PERC 4/DC, 4/SC, 3/QC, 3/DC, 3/DCL, 3/SC,CERC ATA100/4CH, PERC 4/Di, PERC 4e/Di, PERC4e/Si and PERC 4e/DC.To build the installation diskette, execute the package, directing its output to an empty, formatted diskette.
Installing the Driver during Operating System Installation
---------
1. Boot the system using the Microsoft Windows Server CD.
2. When the message Press F6 if you need to install a third party SCSI or RAID driver appears, press the key immediately. Within a few minutes, a screen appears that asks for additional controllers in the system.
3. Press the key. The system prompts for the driver diskette to be inserted.
4. Insert the driver diskette in the floppy drive and press the key. A list of PERC controllers appears.
5. Select the right driver for the installed controller and press the key to load the driver.
NOTE: For Windows 2003, a message appears that states that the driver that you provided is older/newer then the Windows driver. Press the key to use the driver that is on the floppy diskette.
6. Press the key again to continue the installation process as usual.
Installing a Windows Driver for a New RAID Controller
-----------
Perform the following steps to configure the driver when you add the RAID controller to a system that already has Windows installed.
1. Power down the system.
2. Install the new RAID controller in the system. Refer to Hardware Installation for detailed instructions on installing and cabling the RAID controller in the system.
3. Power on the system. The Windows operating system should detect the new controller and display a message to inform the user.
4. The Found New Hardware Wizard screen pops up and displays the detected hardware device.
5. Click Next.
6. On the Locate device driver screen, select Search for a suitable driver for my device and click Next.
7. Insert the appropriate driver diskette and select Floppy disk drives on the Locate Driver Files screen.
8. Click Next.
9. The wizard detects and installs the appropriate device drivers for the new RAID controller.
10. Click Finish to complete the installation.
11. Reboot the server.
=======
This is a self-extracting package of the Windows 2000 and 2003 device driver installation diskette for PERC 4/DC, 4/SC, 3/QC, 3/DC, 3/DCL, 3/SC,CERC ATA100/4CH, PERC 4/Di, PERC 4e/Di, PERC4e/Si and PERC 4e/DC.To build the installation diskette, execute the package, directing its output to an empty, formatted diskette.
Installing the Driver during Operating System Installation
---------
1. Boot the system using the Microsoft Windows Server CD.
2. When the message Press F6 if you need to install a third party SCSI or RAID driver appears, press the
3. Press the
4. Insert the driver diskette in the floppy drive and press the
5. Select the right driver for the installed controller and press the
NOTE: For Windows 2003, a message appears that states that the driver that you provided is older/newer then the Windows driver. Press the
6. Press the
Installing a Windows Driver for a New RAID Controller
-----------
Perform the following steps to configure the driver when you add the RAID controller to a system that already has Windows installed.
1. Power down the system.
2. Install the new RAID controller in the system. Refer to Hardware Installation for detailed instructions on installing and cabling the RAID controller in the system.
3. Power on the system. The Windows operating system should detect the new controller and display a message to inform the user.
4. The Found New Hardware Wizard screen pops up and displays the detected hardware device.
5. Click Next.
6. On the Locate device driver screen, select Search for a suitable driver for my device and click Next.
7. Insert the appropriate driver diskette and select Floppy disk drives on the Locate Driver Files screen.
8. Click Next.
9. The wizard detects and installs the appropriate device drivers for the new RAID controller.
10. Click Finish to complete the installation.
11. Reboot the server.
Ajutor și tutoriale pentru drivere
Pentru mai multe descărcări, accesați Drivere și descărcări. Pentru ajutor privind utilizarea informațiilor de pe această pagină, accesați Tutoriale și ajutor pentru drivere.