Dell PERC 5/E Adapter FW, version 5.2.2-0076, A11
Este necesară repornirea INSTALATE AUTOMAT Acest fișier a fost instalat automat ca parte a unei actualizări recente. Dacă întâmpinați orice probleme, puteți descărca și reinstala manual.Conținutul acestei pagini este posibil să fi fost tradus automat. Pentru a furniza feedback, completați formularul din partea de jos a paginii.
This package provides the firmware for PERC 5/E firmware release 5.2.2-0076
Recomandate
Găsiți cea mai bună descărcare pentru sistemul dvs.
Introduceți detaliile produsului pentru a vedea cele mai recente informații despre driverele sistemului dvs.Asistență căutare
Introduceți eticheta de service Dell sau modelul
Doriți să vă căutați produsul? Introduceți un identificator de produs. Arătați-mi cum
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Conectați-vă la Windows ca administrator pentru a utiliza scanarea automată. Dacă sunteți deja conectat ca administrator și vedeți acest mesaj, reporniți sistemul. Sistemul dvs. este gestionat de către administratorul IT, iar caracteristicile pot fi limitate.
Găsiți mai multe actualizări. Utilizați SupportAssist pentru a găsi cele mai recente actualizări ale driverelor pentru dispozitivul dvs.
Fixes & Enhancements
Fixes:
- Fixed an issue where OS does not boot if 5.2.1-0066 firmware with some specific disk geometry (CHS) considerations (for example: 32sec/track)
- Fixed an issue where user was not notified of a failed power supply unit in the MD1000 enclosure
- Addressed an issue where controller boot was failing when 50+ SATA drives are connected.
- Addressed an issue where MD1000 in Split Mode with SATA drives logs drive errors.
Enhancements:
- Added Notification of Cache State Changes when power is lost to external enclosures
- Added more diagnostic information on the IO Processor registers during failures added testability feature
Citiți mai multe- Fixed an issue where OS does not boot if 5.2.1-0066 firmware with some specific disk geometry (CHS) considerations (for example: 32sec/track)
- Fixed an issue where user was not notified of a failed power supply unit in the MD1000 enclosure
- Addressed an issue where controller boot was failing when 50+ SATA drives are connected.
- Addressed an issue where MD1000 in Split Mode with SATA drives logs drive errors.
Enhancements:
- Added Notification of Cache State Changes when power is lost to external enclosures
- Added more diagnostic information on the IO Processor registers during failures added testability feature
Versiune
5.2.2-0076, A11
Data lansării:
09 mai 2012
Tip de descărcare
Firmware
Categorie
Dispozitiv RAID SAS
Importanță
UrgentDell Technologies highly recommends applying this important update as soon as possible. The update contains critical bug fixes and changes to improve functionality, reliability, and stability of your Dell system. It may also include security fixes and other feature enhancements.
Formate disponibile View Important Information
Format fișier Actualizați pachetul pentru MS Windows pe 32 de biți
Nume fișier: SAS-RAID_Firmware_8VM7T_WN32_5.2.2-0076_A11.EXE
Dimensiune fișier: 6.24 MB
Acesta este un fișier mare. În funcție de viteza conexiunii, descărcarea poate dura mai mult timp.
Descriere format:
Dell Update Packages (DUP) in Microsoft Windows 32bit format have been designed to run on Microsoft Windows 64bit Operating Systems. Dell Update Packages (DUP) in Microsoft Windows 64bit format will only run on Microsoft Windows 64bit Operating Systems. When selecting a device driver update be sure to select the one that is appropriate for your operating system.
Pentru a asigura integritatea descărcării, verificați valoarea cifrei de control.
MD5:
5ab5610f2399a4154aa492c7e289536e
SHA1:
3c2146214583186021e72ae8fcdc033efd93a668
SHA-256:
Not available
Format fișier One or more self extracting disk images inside of a self extracting zip
Nume fișier: BR204810.exe
Dimensiune fișier: 1.85 MB
Acesta este un fișier mare. În funcție de viteza conexiunii, descărcarea poate dura mai mult timp.
Descriere format:
This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, then double-click it to unzip the set of files. Follow the instructions to complete the installation.
Pentru a asigura integritatea descărcării, verificați valoarea cifrei de control.
MD5:
88ba5f2d650e6e860caa13344ce48498
SHA1:
Not available
SHA-256:
Not available
Format fișier A GnuPG file which contains a cryptographic signature
Nume fișier: SAS-RAID_Firmware_8VM7T_LN32_5.2.2-0076_A11.BIN.sign
Dimensiune fișier: 194 Bytes
Acesta este un fișier mare. În funcție de viteza conexiunii, descărcarea poate dura mai mult timp.
Descriere format:
The GnuPG signature for Red Hat Linux Update Package can be used to authenticate Dell's identity in the correlated Red Hat Linux Update Package.
Pentru a asigura integritatea descărcării, verificați valoarea cifrei de control.
MD5:
0c416e0f6aadd1088f5e21fad14e8e4b
SHA1:
5daeb7fedc5bdce41ecd24ec900807455e96d196
SHA-256:
Not available
Format fișier ZipPack External
Nume fișier: DELL_PERC-5-E-ADAPTER_A11_R204810.exe
Dimensiune fișier: 1.33 MB
Acesta este un fișier mare. În funcție de viteza conexiunii, descărcarea poate dura mai mult timp.
Descriere format:
This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.
Pentru a asigura integritatea descărcării, verificați valoarea cifrei de control.
MD5:
3a0f47de4c7529e5fe5f87d7b9933f69
SHA1:
8f50c27805eb75c1a9b79b582c9a151eb5a73ff7
SHA-256:
Not available
Format fișier External release notes
Nume fișier: R204810.txt
Dimensiune fișier: 15.2 KB
Acesta este un fișier mare. În funcție de viteza conexiunii, descărcarea poate dura mai mult timp.
Descriere format:
This file format contains plain text which can be viewed with a standard text editor.
Pentru a asigura integritatea descărcării, verificați valoarea cifrei de control.
MD5:
08257fe75dba22fe3b89869cf8792113
SHA1:
Not available
SHA-256:
Not available
Format fișier Update Package for Red Hat Linux
Nume fișier: SAS-RAID_Firmware_8VM7T_LN32_5.2.2-0076_A11.BIN
Dimensiune fișier: 4.31 MB
Acesta este un fișier mare. În funcție de viteza conexiunii, descărcarea poate dura mai mult timp.
Descriere format:
Dell Update Packages for Linux can be used as stand-alone applications that ensure that specific validation criteria are met, then apply an update.
Note: Update Packages for Linux are open source. See the Dell Update Packages for Linux Readme for details.
Note: Update Packages for Linux are open source. See the Dell Update Packages for Linux Readme for details.
Pentru a asigura integritatea descărcării, verificați valoarea cifrei de control.
MD5:
61f3f081574c7ff47245f68dc0d383c1
SHA1:
774808dc1b8770d02808c20d6ee800089df205da
SHA-256:
Not available
Prin descărcare, acceptați termenii Dell Software License Agreement.
Informații importante
The firmware upgrade may fail if any of the RAID controllers in the system are performing an I/O background task (that is, consistency check, background initialization, rebuild, or reconstruction). Allow the background task to complete before attempting to upgrade the firmware. Patrol Read tasks will not affect a firmware upgrade.
* Linux systems running one or more applications that interact with SCSI devices in certain ways are known to cause a kernel panic situation. Therefore, it is recommended that you stop Server Administrator and its Storage Management Service before running storage controller firmware update packages.
To stop the Dell OpenManage(TM) Server Administrator service,
run "omconfig system webserver action=stop"
To start the Server Administrator service,
run "omconfig system webserver action=start"
To stop the Server Administrator Storage Management Service,
run "/etc/init.d/dataeng stop"
To start the Server Administrator Storage Management Service,
run "/etc/init.d/dataeng start"
* Linux systems running one or more applications that interact with SCSI devices in certain ways are known to cause a kernel panic situation. Therefore, it is recommended that you stop Server Administrator and its Storage Management Service before running storage controller firmware update packages.
To stop the Dell OpenManage(TM) Server Administrator service,
run "omconfig system webserver action=stop"
To start the Server Administrator service,
run "omconfig system webserver action=start"
To stop the Server Administrator Storage Management Service,
run "/etc/init.d/dataeng stop"
To start the Server Administrator Storage Management Service,
run "/etc/init.d/dataeng start"
Sisteme de operare acceptate
Nu se aplică
Se aplică pentru
PERC 5/E Adapter
Instrucțiuni de instalare
Performing the Firmware Upgrade
NOTE: This initial section of the Installation Instructions applies only to configurations with (greater than) 2TB SEDs.
1. Update the firmware version to this version using preferred method below (Zip Pack, Windows DUP, Linux DUP).
2. Reboot for the new FW take effect
3. Un-assign any (greater than) 2TB SED Dedicated or Global Hot Spares in the configuration. Not all configurations have hot spares.
4. Use CTRL-R or OMSS to issue Instant Secure Erase to all un-configured (greater than) 2TB SED drives (all data in these drives will be lost)
5. Re-assign (greater than) 2TB SED Hot Spares.
Zip pack:
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your
hard drive.
Extract Files
1. Browse to the location where you downloaded the file and double-click the
new file to unzip the download package
2. Click Continue.
3. Specify the location to unzip the files.
4. Click onthe OK button to extract files.
After the files are extracted the message all files were successfully
unzipped will appear.
5. Click the OK button to exit from the installer.
Installation
1. Copy extracted files to bootable media.
2. Reboot system to bootable media.
3. Execute update.bat to perform flash.
5. After flash is complete, remove bootable media.
4. Reboot system for changes to take effect.
Windows Update Package:
Download
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click Save to save the file to
your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window
before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.
Linux Update Package:
Download
1. Click the Download Now linkto download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Installation
1. Read over the release information presented by executing the
./FRMW_LX_RXXXXXX.BIN --version command from the shell.
2. Download and install any prerequisites identified in the above step before
proceeding.
3. Run the update by executing ./FRMW_LX_RXXXXXX.BIN from the shell.
4. Follow the remaining prompts to perform the update.
GnuPG Signature of Dell Update Package Instructions for FRMW_LX_RXXXXXX.BIN:
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Installation
1. Import the Dell public key. (You only need to do this once on your system.)
2. Verify the Dell Update Package by using its signature file, FRMW_LX_RXXXXXX.BIN.
NOTE: This initial section of the Installation Instructions applies only to configurations with (greater than) 2TB SEDs.
1. Update the firmware version to this version using preferred method below (Zip Pack, Windows DUP, Linux DUP).
2. Reboot for the new FW take effect
3. Un-assign any (greater than) 2TB SED Dedicated or Global Hot Spares in the configuration. Not all configurations have hot spares.
4. Use CTRL-R or OMSS to issue Instant Secure Erase to all un-configured (greater than) 2TB SED drives (all data in these drives will be lost)
5. Re-assign (greater than) 2TB SED Hot Spares.
Zip pack:
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your
hard drive.
Extract Files
1. Browse to the location where you downloaded the file and double-click the
new file to unzip the download package
2. Click Continue.
3. Specify the location to unzip the files.
4. Click onthe OK button to extract files.
After the files are extracted the message all files were successfully
unzipped will appear.
5. Click the OK button to exit from the installer.
Installation
1. Copy extracted files to bootable media.
2. Reboot system to bootable media.
3. Execute update.bat to perform flash.
5. After flash is complete, remove bootable media.
4. Reboot system for changes to take effect.
Windows Update Package:
Download
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click Save to save the file to
your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window
before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.
Linux Update Package:
Download
1. Click the Download Now linkto download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Installation
1. Read over the release information presented by executing the
./FRMW_LX_RXXXXXX.BIN --version command from the shell.
2. Download and install any prerequisites identified in the above step before
proceeding.
3. Run the update by executing ./FRMW_LX_RXXXXXX.BIN from the shell.
4. Follow the remaining prompts to perform the update.
GnuPG Signature of Dell Update Package Instructions for FRMW_LX_RXXXXXX.BIN:
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Installation
1. Import the Dell public key. (You only need to do this once on your system.)
2. Verify the Dell Update Package by using its signature file, FRMW_LX_RXXXXXX.BIN.
Ajutor și tutoriale pentru drivere
Pentru mai multe descărcări, accesați Drivere și descărcări. Pentru ajutor privind utilizarea informațiilor de pe această pagină, accesați Tutoriale și ajutor pentru drivere.