VMware vCenter Plug-in for MD-Series Storage Arrays, version 2.5
Este necesară repornireaINSTALATE AUTOMATAcest fișier a fost instalat automat ca parte a unei actualizări recente. Dacă întâmpinați orice probleme, puteți descărca și reinstala manual.
Conținutul acestei pagini este posibil să fi fost tradus automat. Pentru a furniza feedback, completați formularul din partea de jos a paginii.
Acest fișier a fost instalat automat ca parte a unei actualizări recente. Dacă întâmpinați orice probleme, puteți descărca și reinstala manual.
VMware vCenter Plug-in for MD-Series Storage Arrays, version 2.5
Recomandate
Găsiți cea mai bună descărcare pentru sistemul dvs.
Introduceți detaliile produsului pentru a vedea cele mai recente informații despre driverele sistemului dvs.
Asistență căutare
Introduceți eticheta de service Dell sau modelul
Doriți să vă căutați produsul? Introduceți un identificator de produs.Arătați-mi cum
No results found.We couldn't find anything for your search. Please modify your search and try again.
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Conectați-vă la Windows ca administrator pentru a utiliza scanarea automată. Dacă sunteți deja conectat ca administrator și vedeți acest mesaj, reporniți sistemul.Sistemul dvs. este gestionat de către administratorul IT, iar caracteristicile pot fi limitate.
Găsiți mai multe actualizări. Utilizați SupportAssist pentru a găsi cele mai recente actualizări ale driverelor pentru dispozitivul dvs.
Fixes & Enhancements
vCenter Plug-in Release 2.5 adds support for setting up asynchronous remote replication, using point-in-time (PiT) snapshots and performing enhanced automatic storage array discovery.
Dell Technologies recomandă aplicarea acestei actualizări în următorul ciclu de actualizare programat. Actualizarea conține modificări pentru menținerea stării generale de funcționare a sistemului. Acesta asigură faptul că software-ul sistemului rămâne actual și compatibil cu alte module de sistem (firmware, BIOS, drivere și software) și poate include alte caracteristici noi.
Save Configuration Files Option Fails on Storage Arrays Running RAID Controller Firmware Version 7.35
ISSUE:
The Save Configuration Files option in the MD vCenter Plug-in fails to execute on storage arrays running RAID controller firmware version 7.35 and generates a validation error. The cause of this error is due to the presence of the 'securityType=' syntax on the command line argument. This syntax is not supported with this firmware version.
Script file example:
show "Creating RAID 0 Volume 1 on new Volume Group BW-Test2084."; // This command creates volume group and the initial volume <1> with offset 0 on the volume group. // NOTE: For Volume Groups that use all available capacity, the last Volume on this group is // created using all remaining capacity by omitting the capacity= volume creation parameter. create volume drives=(85,1) raidLevel=0 userLabel="1" volumeGroupUserLabel="BW-Test2084" 8240 Bytes dssPreAllocate=false securityType=none;
WORKAROUND: Storage arrays running RAID controller firmware version 7.35 should remove the 'securityType=' syntax from all Create Volume commands before validating or executing the script file from the MD Storage Manager (MDSM) Enterprise Management Window (EMW).
PROCEDURE: 1. Edit the script file to be used (for example, Array-1_20120122151509705.cfg). 2. Search the script file for the presence of the 'securityType=' command syntax. 3. Remove all occurrences of the 'securityType=' syntax. 4. Save the script file with a new name (preserve original). 5. From the MDSM Enterprise Management Window, right-click on the storage array to be configured and select Execute Script. 6. From the Script Editor, select File > Load Script and select the configuration file you saved in step 4. (You may have to change the file type drop-down option to All Files instead of Script File (*.script)). 7. Select Tools > Verify Syntax to verify the script is functional. 8. Select Tools > Verify and Execute to apply the script changes to the selected storage array. 1>
1. From the Drivers and Download page at www.support.dell.com, select your MD storage array model. 2. From the list of available downloads, choose vCenter Version 2.5 Plug-In from the Applications category. 3. Download the executable file to your system. 4. Launch the vCenter Plug-in installation wizard contained in the downloaded package. 5. Review and accept the license agreement, then follow the installation prompts. 6. Once the installation is complete, refer to the Dell PowerVault MD-Series Storage Array VMware vCenter Plug-In for MD-Series Storage Arrays Installation and Configuration Guide at support.dell.com/manuals for setup and configuration steps
To upgrade from a previous version of the MD vCenter Plug-in and use the same host server as the application server, run the latest installer on the current application server. The installation wizard will prompt for an administrator password before unregistering and upgrading your MD vCenter Plug-in version.