Adaptec 39160 SCSI Controller - Firmware, v.BIOS v3.10, A03
INSTALATE AUTOMAT Acest fișier a fost instalat automat ca parte a unei actualizări recente. Dacă întâmpinați orice probleme, puteți descărca și reinstala manual.Conținutul acestei pagini este posibil să fi fost tradus automat. Pentru a furniza feedback, completați formularul din partea de jos a paginii.
Adaptec 39160 SCSI Controller BIOS
Recomandate
Găsiți cea mai bună descărcare pentru sistemul dvs.
Introduceți detaliile produsului pentru a vedea cele mai recente informații despre driverele sistemului dvs.Asistență căutare
Introduceți eticheta de service Dell sau modelul
Doriți să vă căutați produsul? Introduceți un identificator de produs. Arătați-mi cum
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Conectați-vă la Windows ca administrator pentru a utiliza scanarea automată. Dacă sunteți deja conectat ca administrator și vedeți acest mesaj, reporniți sistemul. Sistemul dvs. este gestionat de către administratorul IT, iar caracteristicile pot fi limitate.
Găsiți mai multe actualizări. Utilizați SupportAssist pentru a găsi cele mai recente actualizări ale driverelor pentru dispozitivul dvs.
Fixes & Enhancements
Includes all fixes and enhancements in Dell Special code stream and Adaptec Service Pack code
stream (listed below):
3.0
New Features:
-Single Image
-Supports Int 13h extension : check extension present, AH=30h
-Supports SCSI pass through; Int 13h AH=50h
-PnP header table limit is obtained from system BIOS that support the function "Get Device Count".
- key to toggle color/monochrome video display mode will be removed
-In the Host Adapter Configuration screen, the 'SCSI Termination Level' information will be
removed
-In the Boot Device configuration screen, the 'Select SCSI Peripheral from which to boot' option
will not be available to the systems that support BIOS Boot Specification (BBS).
-In the Boot Device Configuration screen, another option will be added to configure the master
channel for the single image feature; for the Ultra160 dual channel chip, either function can be the master
-In the Advance Configuration Options screen, POST display mode will support silent, normal and
diagnostics menu
-In the Advance Configuration Options screen, 'BIOS support Int 13h extension' will be removed
-In the Disk Utilities screen, the device capacity will displayed up to XXX GB
-In the Disk Utilities screen, the format progress will be displayed if the drive does support
progress status bytes in the sense key
3.10
New Features:
-EFI legacy compliance
Bugs Fixed:
- More robust PnP checking
- El Torito AH=4Ch, Initiate disk emulation and boot
- Allocate EBDA as needed during runtime INT 13h calls
- Fresh installation hangs on Win2k due to conflict with CHIM code
- Display capacity for SAFTE
Citiți mai multestream (listed below):
3.0
New Features:
-Single Image
-Supports Int 13h extension : check extension present, AH=30h
-Supports SCSI pass through; Int 13h AH=50h
-PnP header table limit is obtained from system BIOS that support the function "Get Device Count".
-
-In the Host Adapter Configuration screen, the 'SCSI Termination Level' information will be
removed
-In the Boot Device configuration screen, the 'Select SCSI Peripheral from which to boot' option
will not be available to the systems that support BIOS Boot Specification (BBS).
-In the Boot Device Configuration screen, another option will be added to configure the master
channel for the single image feature; for the Ultra160 dual channel chip, either function can be the master
-In the Advance Configuration Options screen, POST display mode will support silent, normal and
diagnostics menu
-In the Advance Configuration Options screen, 'BIOS support Int 13h extension' will be removed
-In the Disk Utilities screen, the device capacity will displayed up to XXX GB
-In the Disk Utilities screen, the format progress will be displayed if the drive does support
progress status bytes in the sense key
3.10
New Features:
-EFI legacy compliance
Bugs Fixed:
- More robust PnP checking
- El Torito AH=4Ch, Initiate disk emulation and boot
- Allocate EBDA as needed during runtime INT 13h calls
- Fresh installation hangs on Win2k due to conflict with CHIM code
- Display capacity for SAFTE
Versiune
BIOS v3.10, A03
Data lansării:
06 oct. 2004
Tip de descărcare
Interfața BIOS
Categorie
Dispozitive SCSI non-RAID
Importanță
RecommendedDell Technologies recomandă aplicarea acestei actualizări în următorul ciclu de actualizare programat. Actualizarea conține modificări pentru menținerea stării generale de funcționare a sistemului. Acesta asigură faptul că software-ul sistemului rămâne actual și compatibil cu alte module de sistem (firmware, BIOS, drivere și software) și poate include alte caracteristici noi.
Formate disponibile View Important Information
Format fișier One or more self extracting disk images inside of a self extracting zip
Nume fișier: 160FW310.exe
Dimensiune fișier: 293.19 KB
Acesta este un fișier mare. În funcție de viteza conexiunii, descărcarea poate dura mai mult timp.
Descriere format:
This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, then double-click it to unzip the set of files. Follow the instructions to complete the installation.
Pentru a asigura integritatea descărcării, verificați valoarea cifrei de control.
MD5:
Not available
SHA1:
Not available
SHA-256:
Not available
Prin descărcare, acceptați termenii Dell Software License Agreement.
Informații importante
In order to create this diskette, the file must be downloaded to and executed on a system running
Microsoft Windows.
*NOTE: If the 39160 HBA is NOT the boot controller in your system, it is highly recommended to disable INT13h support (done in the SCSISelect boot time utility - invoked by pressing 'Ctl-A' when prompted to do so during POST) for the 39160 adapter, since this could impact interoperation with the boot controller.
Microsoft Windows.
*NOTE: If the 39160 HBA is NOT the boot controller in your system, it is highly recommended to disable INT13h support (done in the SCSISelect boot time utility - invoked by pressing 'Ctl-A' when prompted to do so during POST) for the 39160 adapter, since this could impact interoperation with the boot controller.
Sisteme de operare acceptate
Nu se aplică
Se aplică pentru
39160 SCSI Controller - Firmware
Instrucțiuni de instalare
Custom Instructions for 160FW310.exe:
NOTE: For PV725N users, please refer to the online documentation "Upgrading your 39160 SCSI card firmware" available in the PV725N User Guides section of http://support.dell.com
Floppy Disk Boot to Disk for 160FW310.exe
Download
IMPORTANT NOTE: For Netware & Linux Users, this diskette creation
file must be downloaded to and executed on a system running Microsoft
Windows 9x or above in order to create the bootable floppy disk.
1. Click Download Now, to download the file.
2. If the Export Compliance Disclaimer window appears, click
Yes, I Accept this Agreement.
3. When the File Download window appears, click Save
(Windows XP users will click Save) this program to disk and click OK. The
Save In: window appears.
4. From the Save In: field, click the down arrow then click to
select Desktop and click Save. The file will download to your desktop.
5. If the Download Complete window appears, click Close.
The file icon appears on your desktop.
Hard Drive Floppy Disk Creation
1. Get 1 blank, formatted floppy disk.
2. Double-click the new icon (it looks like a floppy diskette) on
the desktop. The Self-Extractor window appears.
3. Click Setup. A black MS-DOS window appears with a
message indicating that you need 1 floppy diskette.
4. Press the [ENTER] key.
A message appears prompting you to insert a blank floppy diskette.
Insert a floppy disk into the floppy disk drive.
5. Press the [ENTER] key. A message appears indicating that
all data on the disk will be erased.
6. Press the [y] key and then press the [ENTER] key.
The files are copied to the floppy diskette.
7. After all the files have been copied to the floppy disk,
press the [ENTER] key and the MS-DOS window closes.
Install
1. Insert the newly created floppy disk into the Floppy
drive of the system to be upgraded.
2. Reboot your system.
3. Once system has booted to diskette, follow instructions as
they appear on the system console. They will guide you through the
update process, including the subsequent reboots needed to clear the
card of legacy image information. Refer to README.TXT file for more
information.
NOTE: For PV725N users, please refer to the online documentation "Upgrading your 39160 SCSI card firmware" available in the PV725N User Guides section of http://support.dell.com
Floppy Disk Boot to Disk for 160FW310.exe
Download
IMPORTANT NOTE: For Netware & Linux Users, this diskette creation
file must be downloaded to and executed on a system running Microsoft
Windows 9x or above in order to create the bootable floppy disk.
1. Click Download Now, to download the file.
2. If the Export Compliance Disclaimer window appears, click
Yes, I Accept this Agreement.
3. When the File Download window appears, click Save
(Windows XP users will click Save) this program to disk and click OK. The
Save In: window appears.
4. From the Save In: field, click the down arrow then click to
select Desktop and click Save. The file will download to your desktop.
5. If the Download Complete window appears, click Close.
The file icon appears on your desktop.
Hard Drive Floppy Disk Creation
1. Get 1 blank, formatted floppy disk.
2. Double-click the new icon (it looks like a floppy diskette) on
the desktop. The Self-Extractor window appears.
3. Click Setup. A black MS-DOS window appears with a
message indicating that you need 1 floppy diskette.
4. Press the [ENTER] key.
A message appears prompting you to insert a blank floppy diskette.
Insert a floppy disk into the floppy disk drive.
5. Press the [ENTER] key. A message appears indicating that
all data on the disk will be erased.
6. Press the [y] key and then press the [ENTER] key.
The files are copied to the floppy diskette.
7. After all the files have been copied to the floppy disk,
press the [ENTER] key and the MS-DOS window closes.
Install
1. Insert the newly created floppy disk into the Floppy
drive of the system to be upgraded.
2. Reboot your system.
3. Once system has booted to diskette, follow instructions as
they appear on the system console. They will guide you through the
update process, including the subsequent reboots needed to clear the
card of legacy image information. Refer to README.TXT file for more
information.
Ajutor și tutoriale pentru drivere
Pentru mai multe descărcări, accesați Drivere și descărcări. Pentru ajutor privind utilizarea informațiilor de pe această pagină, accesați Tutoriale și ajutor pentru drivere.