Seagate SAS drive model numbers ST2000NM0001, ST1000NM0001 and ST500NM0001 firmware version PS08
INSTALATE AUTOMAT Acest fișier a fost instalat automat ca parte a unei actualizări recente. Dacă întâmpinați orice probleme, puteți descărca și reinstala manual.Conținutul acestei pagini este posibil să fi fost tradus automat. Pentru a furniza feedback, completați formularul din partea de jos a paginii.
This release contains firmware version PS08 for Seagate SAS (7200 rpm 3.5 SAS) 500GB, 1TB and 2TB Hard Drives. Dell. Vendor model numbers ST2000NM0001, ST1000NM0001 and ST500NM0001.
Recomandate
Găsiți cea mai bună descărcare pentru sistemul dvs.
Introduceți detaliile produsului pentru a vedea cele mai recente informații despre driverele sistemului dvs.Asistență căutare
Introduceți eticheta de service Dell sau modelul
Doriți să vă căutați produsul? Introduceți un identificator de produs. Arătați-mi cum
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Conectați-vă la Windows ca administrator pentru a utiliza scanarea automată. Dacă sunteți deja conectat ca administrator și vedeți acest mesaj, reporniți sistemul. Sistemul dvs. este gestionat de către administratorul IT, iar caracteristicile pot fi limitate.
Găsiți mai multe actualizări. Utilizați SupportAssist pentru a găsi cele mai recente actualizări ale driverelor pentru dispozitivul dvs.
Fixes & Enhancements
Fixes:
When firmware is applied prior to a cold power cycle this firmware prevents a situation that can lead to unrecoverable drive failure during A/C power removal.
Resolved rare issue that can cause drive to not complete during logical device format.
Resolved rare issue that can report a SMART trip on the drive incorrectly
Enhancements:
Improved performance of sequential writes with queue depth= 1
Improve drive error handling
Citiți mai multeWhen firmware is applied prior to a cold power cycle this firmware prevents a situation that can lead to unrecoverable drive failure during A/C power removal.
Resolved rare issue that can cause drive to not complete during logical device format.
Resolved rare issue that can report a SMART trip on the drive incorrectly
Enhancements:
Improved performance of sequential writes with queue depth= 1
Improve drive error handling
Versiune
PS08, A04
Data lansării:
04 feb. 2013
Tip de descărcare
Firmware
Categorie
Unitate SAS
Importanță
RecommendedDell Technologies recomandă aplicarea acestei actualizări în următorul ciclu de actualizare programat. Actualizarea conține modificări pentru menținerea stării generale de funcționare a sistemului. Acesta asigură faptul că software-ul sistemului rămâne actual și compatibil cu alte module de sistem (firmware, BIOS, drivere și software) și poate include alte caracteristici noi.
Formate disponibile View Important Information
Format fișier Actualizați pachetul pentru MS Windows pe 32 de biți
Nume fișier: SAS-Drive_Firmware_GXCDR_WN32_PS08_A04.EXE
Dimensiune fișier: 11.26 MB
Acesta este un fișier mare. În funcție de viteza conexiunii, descărcarea poate dura mai mult timp.
Descriere format:
Dell Update Packages (DUP) in Microsoft Windows 32bit format have been designed to run on Microsoft Windows 64bit Operating Systems. Dell Update Packages (DUP) in Microsoft Windows 64bit format will only run on Microsoft Windows 64bit Operating Systems. When selecting a device driver update be sure to select the one that is appropriate for your operating system.
Pentru a asigura integritatea descărcării, verificați valoarea cifrei de control.
MD5:
e07a69a0bdd91111d94b96898656362b
SHA1:
831c60431bb918f6549b64ab305437f04bc77561
SHA-256:
26ecf7c0de72aeea2b67fb7cdc90ecad49e563dfed5b58d4731a20db1318147e
Format fișier A GnuPG file which contains a cryptographic signature
Nume fișier: SAS-Drive_Firmware_GXCDR_LN_PS08_A04.BIN.sign
Dimensiune fișier: 189 Bytes
Acesta este un fișier mare. În funcție de viteza conexiunii, descărcarea poate dura mai mult timp.
Descriere format:
The GnuPG signature for Red Hat Linux Update Package can be used to authenticate Dell's identity in the correlated Red Hat Linux Update Package.
Pentru a asigura integritatea descărcării, verificați valoarea cifrei de control.
MD5:
db1ba5f49f182f53957cb64bdae47552
SHA1:
d37a680d7826b20c8d7386a2c90700ed58cc762b
SHA-256:
78e0fa1fa94686ff1e64b5af4a606027e6a8d15dc78b32a9193a6f89878524b2
Format fișier Update Package for Red Hat Linux
Nume fișier: SAS-Drive_Firmware_GXCDR_LN_PS08_A04.BIN
Dimensiune fișier: 9.99 MB
Acesta este un fișier mare. În funcție de viteza conexiunii, descărcarea poate dura mai mult timp.
Descriere format:
Dell Update Packages for Linux can be used as stand-alone applications that ensure that specific validation criteria are met, then apply an update.
Note: Update Packages for Linux are open source. See the Dell Update Packages for Linux Readme for details.
Note: Update Packages for Linux are open source. See the Dell Update Packages for Linux Readme for details.
Pentru a asigura integritatea descărcării, verificați valoarea cifrei de control.
MD5:
ef7f3a4d2c0f3470c0e8ab8973dea79b
SHA1:
cb9bfb11e4cea9f2bb1aa221960377878bba6f97
SHA-256:
ade77b4b03b4dbef6a842952c5a924cdbe415c6363f95456ca94044f75bb955c
Prin descărcare, acceptați termenii Dell Software License Agreement.
Informații importante
This update will not run if any of the following conditions exist
1. Any Virtual Disk that is not optimal.
2. A RAID container that is performing a Background Initialization or Consistency Check.
3. A Rebuild, Resync, or copyback function is taking place.
4. A RAID set that is Partially Degraded or in a Degraded state.
This update will run on drives remaining in a RAID set that is in a Offline state.
There is an architectural constraint with Dell DUP HDD firmware update utility, related to system memory utilization, which is typically encountered on systems with minimal system memory, memory-intensive configurations, multiple RAID controllers, or memory-intensive applications. This issue is typically reported as - The operation was not successful because the device buffer write has failed. And will result in an aborted attempt to update firmware on the identified HDD. Error codes associated with this failure mode include 8009 and 8017. Once an error is detected, the update session is aborted. There is no data integrity or data availability risk associated with this issue. Subsequent attempts to update the HDD firmware may succeed, particularly if system resources are freed up.
1. Any Virtual Disk that is not optimal.
2. A RAID container that is performing a Background Initialization or Consistency Check.
3. A Rebuild, Resync, or copyback function is taking place.
4. A RAID set that is Partially Degraded or in a Degraded state.
This update will run on drives remaining in a RAID set that is in a Offline state.
There is an architectural constraint with Dell DUP HDD firmware update utility, related to system memory utilization, which is typically encountered on systems with minimal system memory, memory-intensive configurations, multiple RAID controllers, or memory-intensive applications. This issue is typically reported as - The operation was not successful because the device buffer write has failed. And will result in an aborted attempt to update firmware on the identified HDD. Error codes associated with this failure mode include 8009 and 8017. Once an error is detected, the update session is aborted. There is no data integrity or data availability risk associated with this issue. Subsequent attempts to update the HDD firmware may succeed, particularly if system resources are freed up.
Sisteme de operare acceptate
Novell SuSE Linux ES 11
Windows Server 2008 x64
Red Hat® Ent Linux 4.5
Red Hat® Ent Linux 4.6
Suse Linux ES 10
Red Hat® Enterprise Linux 4.5
Windows Server 2012
Red Hat® Ent Linux 4.7
Red Hat® Ent Linux 5.2
Red Hat® Enterprise Linux 6
Red Hat® Ent Linux 5
Windows Server 2008 x86
Windows Server 2003
Windows Server 2008 R2
Windows Server 2003 x64
Se aplică pentru
Seagate (Constellation ES) SAS 1TB 7.2K RPM
Seagate (Constellation ES) SAS 2TB 7.2K RPM
Seagate (Constellation ES) SAS 500GB 7.2K RPM
Instrucțiuni de instalare
Dell Update Package Instructions:
Download
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.
Download
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.
Ajutor și tutoriale pentru drivere
Pentru mai multe descărcări, accesați Drivere și descărcări. Pentru ajutor privind utilizarea informațiilor de pe această pagină, accesați Tutoriale și ajutor pentru drivere.