DELL,SRV,SW,OEM-ID,1.0,A00

INSTALATE AUTOMAT Acest fișier a fost instalat automat ca parte a unei actualizări recente. Dacă întâmpinați orice probleme, puteți descărca și reinstala manual.
Conținutul acestei pagini este posibil să fi fost tradus automat. Pentru a furniza feedback, completați formularul din partea de jos a paginii.
'OEM ID' for 12G OEMReady.
Recomandate

Găsiți cea mai bună descărcare pentru sistemul dvs.

Introduceți detaliile produsului pentru a vedea cele mai recente informații despre driverele sistemului dvs.

Asistență căutare

Introduceți eticheta de service Dell sau modelul

Doriți să vă căutați produsul? Introduceți un identificator de produs. Arătați-mi cum

This driver is not compatible

This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.

Găsiți mai multe actualizări. Utilizați SupportAssist pentru a găsi cele mai recente actualizări ale driverelor pentru dispozitivul dvs.

Fixes & Enhancements

Fixes: BIOS DUP upgrade issue ( on linux OS , when updating one system at a time) for Factory shipped OEM Ready System.

Enhancement:
Added '1 to many' install support for OEM ID ( using PM DUP).
Citiți mai multe

Versiune

1.01, A00

Data lansării:

20 feb. 2013

Tip de descărcare

Aplicații

Categorie

Modul de identitate

Importanță

Optional
Dell Technologies recommends reviewing this update to determine if it applies to your system. The update contains changes that impact only certain configurations or provides new features that may or may not apply to your environment.
Formate disponibile View Important Information

Format fișier Actualizați pachetul pentru MS Windows pe 32 de biți
Nume fișier: Identity-Module_Application_H72X8_WN32_1.01_A00.EXE
Dimensiune fișier: 7.96 MB
Acesta este un fișier mare. În funcție de viteza conexiunii, descărcarea poate dura mai mult timp.
Descriere format:
Dell Update Packages (DUP) in Microsoft Windows 32bit format have been designed to run on Microsoft Windows 64bit Operating Systems. Dell Update Packages (DUP) in Microsoft Windows 64bit format will only run on Microsoft Windows 64bit Operating Systems. When selecting a device driver update be sure to select the one that is appropriate for your operating system.
Pentru a asigura integritatea descărcării, verificați valoarea cifrei de control.
MD5:
c8e85af8b07a2ab7db9ccfa06b5ae6db
SHA1:
9da89b64a61b9a7790cce67b158f971dabab4043
SHA-256:
5cacc90309c9708b9d8d9670b8016831c265dbd10a99d9a696dd5b938ba39ac8

Format fișier An application
Nume fișier: H72X8_R720_Cust_1_01.exe
Dimensiune fișier: 164.37 KB
Acesta este un fișier mare. În funcție de viteza conexiunii, descărcarea poate dura mai mult timp.
Descriere format:
Application
Pentru a asigura integritatea descărcării, verificați valoarea cifrei de control.
MD5:
f2ee8d4c5f63a20d4b4fe5ec691b8b16
SHA1:
5345645463a95f821b4f3c7dccf97a69307c1e37
SHA-256:
f0e09db03697f22f6ebd395d67fcad54ed621ae66aa4ce1b2be90a80a64db9e6

Format fișier Board Service Utility
Nume fișier: H72X8_R720_CustBSU_1_01.exe
Dimensiune fișier: 164.38 KB
Acesta este un fișier mare. În funcție de viteza conexiunii, descărcarea poate dura mai mult timp.
Descriere format:
Board Service Utility
Pentru a asigura integritatea descărcării, verificați valoarea cifrei de control.
MD5:
9f49a9a1e61ed4abbeeed3914e077e97
SHA1:
51f8e8f5b739c5c0099dce0fcf8b3b17d91a0cb7
SHA-256:
1031142d0f5ab22da560e237bd8327c7cdb9f5e59e8e2d54d8952a10d5912f40

Format fișier A GnuPG file which contains a cryptographic signature
Nume fișier: Identity-Module_Application_H72X8_LN_1.01_A00.BIN.sign
Dimensiune fișier: 194 Bytes
Acesta este un fișier mare. În funcție de viteza conexiunii, descărcarea poate dura mai mult timp.
Descriere format:
The GnuPG signature for Red Hat Linux Update Package can be used to authenticate Dell's identity in the correlated Red Hat Linux Update Package.
Pentru a asigura integritatea descărcării, verificați valoarea cifrei de control.
MD5:
ea5c35653710a8ced2ea88c3488a299d
SHA1:
99174044f8727e36c94de0fc5bdc1f270dd60120
SHA-256:
5ae66de8fe23ae4a4d0cc6b8a920d33947f14344403705554667e5cd38752498

Format fișier Update Package for Red Hat Linux
Nume fișier: Identity-Module_Application_H72X8_LN_1.01_A00.BIN
Dimensiune fișier: 6.63 MB
Acesta este un fișier mare. În funcție de viteza conexiunii, descărcarea poate dura mai mult timp.
Descriere format:
Dell Update Packages for Linux can be used as stand-alone applications that ensure that specific validation criteria are met, then apply an update.
Note: Update Packages for Linux are open source. See the Dell Update Packages for Linux Readme for details.
Pentru a asigura integritatea descărcării, verificați valoarea cifrei de control.
MD5:
d3c3421cbdea4cabc4f2708b3dc1d17d
SHA1:
98e69be1b77bfad19e25825e160c2731dc7fa877
SHA-256:
9b45a723943837e554fb1ab311d31ccf2e763a0d73592012343e09b8ebfba80f

Prin descărcare, acceptați termenii Dell Software License Agreement.

Detalii suplimentare

Show All | Ascundeți-le pe toate
OEMReady Identity Module.

1) This revision of Identity Module is recommended along with at least iDRAC 1.30.30, LC 1.1.1.18, and BIOS 1.4.5.
******************* "Cust" ( Customer ) exe *******************

PREPARATION:
1) Ensure system is already Debranded and the file is for your platform.
2) Note any iDRAC user settings that are important for your specific usage. 'Reset iDRAC to Default Settings' is needed for this installation and will set iDRAC user settings ( outside Identity Module) to revert to Std Dell Defaults.

INSTALLATION:
1) Ensure Identity Module's exe file does not have "BSU" ( Board Service Util) in its file name.
2) Extract .pm from the zip pack exe.
3) Login to iDRAC web GUI , navigate to 'Update and Rollback' link on left pane.
4) Using 'Firmware Update' tab, browse to the "Cust" .pm file and upload it.
5) Under the 'Update Details' section, select your .pm file. Ensure 'Current' and 'Available' revisions are as expected.
6) Click 'Install' button.
7) Go to 'Job Queue' tab and wait for your install job to change from 'New' to 'Completed'.
8) Navigate to 'Troubleshooting' link on left pane. Click on 'Diagnostic' tab on right. Click on 'iDRAC rest to Default Settings' link. Note: This step will set V4 DHCP to Std Dell's default value of disabled.
Wait for iDRAC reboot to complete ( about 4 minutes ).Enable V4 DHCP (assuming that was current setting).
11) Reboot the system.Wait for System to complete followed by one more self-reboot before you see updated BIOS splash logo.
12) Verify that the tab -->'System Inventory' --> 'Firmware Inventory' shows 'Identity Module' as a component with new revision.
13) Verify the Branding changes ( on iDrac GUI and System) are working.
14) Restore ( if any ) iDRAC user settings that were noted during 'Preparation' above.

******************* 'Identity Module DUP' ( aka PM DUP). *******************

Note:
1) None of the below methods using DUP are supported for users upgrading from OEMReady rev 1.0 to rev 1.01. These are listed here for
those users trying to switch back to rev 1.01 from a later revision of OEM Ready.
2)For users upgrading from OEMReady revision 1.0, using "Cust" .pm file is the only supported method.
3) All below methods are for updating installed Identity Module and not for Fresh Install.

PREPARATION:
1) Ensure you have IdentityModule DUP for the appropriate 12G platform and that your system is already Debranded using atleast OEMReady Identity Module revision 1.01.
2) Ensure you have iDRAC revision 1.30.30 or later and Lifecycle Controller revision 1.1.1.18 or later.
3) Ensure you have appropriate windows or Linux IdentityModule DUP matching your OS.

INSTALLATION ( OS DUP method ) :

1) Refer to "Dell Update Packages Version 7.2 User's Guide" or later found on Dell's support site http://www.dell.com/support/home .

INSTALLATION ( Remote Enablement method):
1) Please request latest '12G_Dell_OEM_IdentityModule_One_to_Many_Update" document from Dell OEM team.

INSTALLATION ( iDRAC GUI method):

Note: Only windows DUP are supported for this method.
1) Login to Idrac GUI. Navigate to 'Update and Rollback' link and using "Firmware Update" tab, browse to the windows DUP on your machine.
2) Upload the windows DUP and confirm "Package successfully downloaded" message under 'Update details'.
3) Click on 'Install next reboot' or 'Install and Reboot' button as appropriate.
4) Navigate to 'Job Queue' page and confirm that the job completed.
5) Let the iDRAC reboot complete ( depending upon install option you chose in step 3).
6) Reboot host.
7) Verify the Branding changes ( on iDrac GUI and System) are working.

******************* "Cust BSU ".exe (Board Service Utility) *******************

Important Notes:
1. This utility should only be used for installing after motherboard replacement and by Dell OEM Service team ( using 'MotherBoard Replacement' steps).
Use of this utility for other purposes may render the current application inoperable.
Please consult your support/services before using this utility.

Ajutor și tutoriale pentru drivere