Este necesară repornireaINSTALATE AUTOMATAcest fișier a fost instalat automat ca parte a unei actualizări recente. Dacă întâmpinați orice probleme, puteți descărca și reinstala manual.
Conținutul acestei pagini este posibil să fi fost tradus automat. Pentru a furniza feedback, completați formularul din partea de jos a paginii.
Acest fișier a fost instalat automat ca parte a unei actualizări recente. Dacă întâmpinați orice probleme, puteți descărca și reinstala manual.
This package provides the Windows/DOS based Seagate Barracuda ST31000524AS/ST3320413AS/ST3500413AS/ST3250312AS Firmware Update and is supported on the OptiPlex, XPS Desktop, Alienware Desktop, Inspiron Desktop, Precision, Vostro Desktop and Dimension models that are running the following Windows and DOS Operating Systems.
Recomandate
Găsiți cea mai bună descărcare pentru sistemul dvs.
Introduceți detaliile produsului pentru a vedea cele mai recente informații despre driverele sistemului dvs.
Asistență căutare
Introduceți eticheta de service Dell sau modelul
Doriți să vă căutați produsul? Introduceți un identificator de produs.Arătați-mi cum
No results found.We couldn't find anything for your search. Please modify your search and try again.
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Conectați-vă la Windows ca administrator pentru a utiliza scanarea automată. Dacă sunteți deja conectat ca administrator și vedeți acest mesaj, reporniți sistemul.Sistemul dvs. este gestionat de către administratorul IT, iar caracteristicile pot fi limitate.
Găsiți mai multe actualizări. Utilizați SupportAssist pentru a găsi cele mai recente actualizări ale driverelor pentru dispozitivul dvs.
Fixes & Enhancements
Fixes - Not Applicable.
Enhancements - Enhanced performance and reliability.
Dell Technologies recomandă aplicarea acestei actualizări în următorul ciclu de actualizare programat. Actualizarea conține modificări pentru menținerea stării generale de funcționare a sistemului. Acesta asigură faptul că software-ul sistemului rămâne actual și compatibil cu alte module de sistem (firmware, BIOS, drivere și software) și poate include alte caracteristici noi.
Format fișierExtrage fișiere direct pe discul local
Nume fișier:B765JC49.zip
Dimensiune fișier:11.45 MB
Acesta este un fișier mare. În funcție de viteza conexiunii, descărcarea poate dura mai mult timp.
Descriere format:
This file format consists of an archive of files that may be decompressed to a directory on the hard drive. The installation can then be done from that directory.
Windows based firmware update for ST3320413AS/ST3500413AS/ST31000524AS: 1. Download and unzip "B765JC49.zip" into your desktop. 2. In "B765JC49" folder, please search for the "Windows" folder. 3. Double click "B7032100.EXE" and it will begin to run. On the first screen you will select your language, and then select "OK". The next screen is a warning screen, please read and select "Next" if you agree. The next screen is the License Agreement screen. If you agree, click "I agree" and then click "Next". 4. You will then come to the screen that asks you to close and save all applications and to back up your data. When you are ready to start the firmware update, please check the "Begin firmware update procedure", and then click "Proceed". 5. The system will reboot and load the firmware. Once the firmware update is complete the system will boot up into Windows normally.
DOS based firmware update for ST3250312AS/ST3320413AS/ST3500413AS/ST31000524AS: 1. Unzip "B765JC49.zip" into your bootable USB key. Boot up the computer with USB key. 2. In "Dos" folder, just type "JC49.BAT" at the DOS prompt and press the enter key. 3. Your system will now start updating the HDD firmware. Once the firmware update is completed, your system will display a "DRIVE PASSED" message. If you already have the correct JC49 firmware on your hard drive, you will get a "This drive already has this firmware. DRIVE FAILED TO LOAD the TARGET CODE" message. 4. Remove your USB key, and turn off your system using the computers power button. Once the computer has been powered down, you can now turn the computer on normally.