ATI Hyper Memory PCI-Express X16 (DVI/VGA/TV out) Radeon X300 SE, v.113-A62801-106, A02
INSTALATE AUTOMAT Acest fișier a fost instalat automat ca parte a unei actualizări recente. Dacă întâmpinați orice probleme, puteți descărca și reinstala manual.Conținutul acestei pagini este posibil să fi fost tradus automat. Pentru a furniza feedback, completați formularul din partea de jos a paginii.
* ATI Radeon X300 SE firmware update for customers who are experiencing a blank screen issue with the Dell UltraSharp 2005FPW 20.1-inch Wide Aspect Flat Panel LCD. (Customers with other monitors should not apply this update.)
* A brief description of the firmware update procedure:
------------------------------------------------------------------------------------
1) Turn your system off before changing the monitor cable.
2) The 2005FPW blank screen issue only occurs if you use the DVI cable (white connector). Connect the VGA cable (blue connector) to your system and disconnect the DVI cable (white connector).
3) Turn your system on. Complete the setup process if this is your first time to turn the system on.
4) Download R103296.exe to your hard drive.
5) Double-click on this utility (R103296) to unzip the files.
6) When all files have been successfully unzipped, click the OK button to start the update.
7) The ATIWinflash utility appears and asks you to close all other applications before continuing.
8) Click the CONTINUE button when you're ready.
9) In the next few minutes, the ATIWinflash program will update your firmware.
10) During this time, your keyboard and mouse will not respond until the process is complete.
11) When your VBIOS has been successfully programmed, click the OK button to restart your system.
* A brief description of the firmware update procedure:
------------------------------------------------------------------------------------
1) Turn your system off before changing the monitor cable.
2) The 2005FPW blank screen issue only occurs if you use the DVI cable (white connector). Connect the VGA cable (blue connector) to your system and disconnect the DVI cable (white connector).
3) Turn your system on. Complete the setup process if this is your first time to turn the system on.
4) Download R103296.exe to your hard drive.
5) Double-click on this utility (R103296) to unzip the files.
6) When all files have been successfully unzipped, click the OK button to start the update.
7) The ATIWinflash utility appears and asks you to close all other applications before continuing.
8) Click the CONTINUE button when you're ready.
9) In the next few minutes, the ATIWinflash program will update your firmware.
10) During this time, your keyboard and mouse will not respond until the process is complete.
11) When your VBIOS has been successfully programmed, click the OK button to restart your system.
Recomandate
Găsiți cea mai bună descărcare pentru sistemul dvs.
Introduceți detaliile produsului pentru a vedea cele mai recente informații despre driverele sistemului dvs.Asistență căutare
Introduceți eticheta de service Dell sau modelul
Doriți să vă căutați produsul? Introduceți un identificator de produs. Arătați-mi cum
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Conectați-vă la Windows ca administrator pentru a utiliza scanarea automată. Dacă sunteți deja conectat ca administrator și vedeți acest mesaj, reporniți sistemul. Sistemul dvs. este gestionat de către administratorul IT, iar caracteristicile pot fi limitate.
Găsiți mai multe actualizări. Utilizați SupportAssist pentru a găsi cele mai recente actualizări ale driverelor pentru dispozitivul dvs.
Fixes & Enhancements
Adresses no video issue with Dell UltraSharp 2005FPW 20.1-inch Wide Aspect Flat Panel LCD. This release is intended for customers with the 2005FPW display. Only customers with the 2005FPW panel should update to this BIOS.
Citiți mai multeVersiune
113-A62801-106, A02
Data lansării:
24 iun. 2005
Tip de descărcare
Interfața BIOS
Categorie
Placă video
Importanță
OptionalDell Technologies recommends reviewing this update to determine if it applies to your system. The update contains changes that impact only certain configurations or provides new features that may or may not apply to your environment.
Formate disponibile
Format fișier ZipPack External
Nume fișier: R103296.EXE
Dimensiune fișier: 363.56 KB
Acesta este un fișier mare. În funcție de viteza conexiunii, descărcarea poate dura mai mult timp.
Descriere format:
This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.
Pentru a asigura integritatea descărcării, verificați valoarea cifrei de control.
MD5:
Not available
SHA1:
Not available
SHA-256:
Not available
Prin descărcare, acceptați termenii Dell Software License Agreement.
Se aplică pentru
Hyper Memory PCI-Express X16 (DVI/VGA/TV out) Radeon X300 SE
Instrucțiuni de instalare
Hard Drive Installation (via WinZip) with Setup.exe File for R103296.EXE
Download
1.Click Download Now, to download the file.
2.When the File Download window appears, click Save (Windows XP
users will click Save) this program to disk and click OK. The Save In:
window appears.
3.From the Save In: field, click the down arrow then click to
select Desktop and click Save. The file will download to your desktop.
4.If the Download Complete window appears, click Close. The file
icon appears on your desktop.
Install
1.Double-click the new icon on the desktop labeled R103296.EXE.
2.The Self-Extracting window appears and prompts you to extract or
unzip to C:\DELL\DRIVERS\R103296. Write down this path so the executable (I.e.
Setup.exe) file can be found later.
3.The Self-Extractor window appears.
4.Click OK.
5.After completing the file extraction, if the Self-Extractor
window is still open, close it.
6.Click the Start button and then click Run.
7.Type C:\DELL\DRIVERS\R103296 in the Open textbox and then click OK.
8.Follow the on-screen installation instructions.
Download
1.Click Download Now, to download the file.
2.When the File Download window appears, click Save (Windows XP
users will click Save) this program to disk and click OK. The Save In:
window appears.
3.From the Save In: field, click the down arrow then click to
select Desktop and click Save. The file will download to your desktop.
4.If the Download Complete window appears, click Close. The file
icon appears on your desktop.
Install
1.Double-click the new icon on the desktop labeled R103296.EXE.
2.The Self-Extracting window appears and prompts you to extract or
unzip to C:\DELL\DRIVERS\R103296. Write down this path so the executable (I.e.
Setup.exe) file can be found later.
3.The Self-Extractor window appears.
4.Click OK.
5.After completing the file extraction, if the Self-Extractor
window is still open, close it.
6.Click the Start button and then click Run.
7.Type C:\DELL\DRIVERS\R103296 in the Open textbox and then click OK.
8.Follow the on-screen installation instructions.
Need help with video connection issues?
Find a solution in Dell's video troubleshooting and usage guide.Ajutor și tutoriale pentru drivere
Pentru mai multe descărcări, accesați Drivere și descărcări. Pentru ajutor privind utilizarea informațiilor de pe această pagină, accesați Tutoriale și ajutor pentru drivere.