Samsung P80P Plus 40GB Lead Free PATA HDD, P80P Plus 80GB Lead Free PATA HDD, v.TK300-09, A01
INSTALATE AUTOMAT Acest fișier a fost instalat automat ca parte a unei actualizări recente. Dacă întâmpinați orice probleme, puteți descărca și reinstala manual.Conținutul acestei pagini este posibil să fi fost tradus automat. Pentru a furniza feedback, completați formularul din partea de jos a paginii.
For Bootable Diskette:
* PLEASE PRINT THE FOLLOWING INSTRUCTIONS *
1. Click on the (BR139989.EXE) file and select "RUN" then "RUN" again.
2. Choose "Continue" in the next window to create a bootable
floppy.
3. Close all applications, and re-boot from the floppy image just created.
4. The Samsung Sflash utility will start automatically.
5. The utility will only update the models listed above in this release.
6. The application will report "Updated Successfully".
7. Once completed you will be left at an "A:\>".
8. Remove the floppy diskette and power off your system.
9. Restart your system.
Alternative Flash process (no floppy available)
(PLEASE MAKE SURE A/C POWER IS BEING USED WHILE UPDATING YOUR HARD DRIVE)
1. The files contained in (R139989.EXE) should be extracted to bootable media. (ie. Floppy, CD, Zip drive, USB Flash Memory). The default extraction directory is C:\DELL\DRIVERS\R139989.EXE.
2. Once the files are extracted, copy the contents of C:\DELL\DRIVERS\R139989.EXE\FILES directory to bootable source. Boot to that source.
3. The Samsung Sflash utility will start automatically.
4. The utility will only update the models listed above in this release.
5. The application will report "Updated Successfully".
6. Once completed you will be left at a DOS prompt.
7. Remove the bootable media and power off your system.
8. Restart your system.
* PLEASE PRINT THE FOLLOWING INSTRUCTIONS *
1. Click on the (BR139989.EXE) file and select "RUN" then "RUN" again.
2. Choose "Continue" in the next window to create a bootable
floppy.
3. Close all applications, and re-boot from the floppy image just created.
4. The Samsung Sflash utility will start automatically.
5. The utility will only update the models listed above in this release.
6. The application will report "Updated Successfully".
7. Once completed you will be left at an "A:\>".
8. Remove the floppy diskette and power off your system.
9. Restart your system.
Alternative Flash process (no floppy available)
(PLEASE MAKE SURE A/C POWER IS BEING USED WHILE UPDATING YOUR HARD DRIVE)
1. The files contained in (R139989.EXE) should be extracted to bootable media. (ie. Floppy, CD, Zip drive, USB Flash Memory). The default extraction directory is C:\DELL\DRIVERS\R139989.EXE.
2. Once the files are extracted, copy the contents of C:\DELL\DRIVERS\R139989.EXE\FILES directory to bootable source. Boot to that source.
3. The Samsung Sflash utility will start automatically.
4. The utility will only update the models listed above in this release.
5. The application will report "Updated Successfully".
6. Once completed you will be left at a DOS prompt.
7. Remove the bootable media and power off your system.
8. Restart your system.
Recomandate
Găsiți cea mai bună descărcare pentru sistemul dvs.
Introduceți detaliile produsului pentru a vedea cele mai recente informații despre driverele sistemului dvs.Asistență căutare
Introduceți eticheta de service Dell sau modelul
Doriți să vă căutați produsul? Introduceți un identificator de produs. Arătați-mi cum
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Conectați-vă la Windows ca administrator pentru a utiliza scanarea automată. Dacă sunteți deja conectat ca administrator și vedeți acest mesaj, reporniți sistemul. Sistemul dvs. este gestionat de către administratorul IT, iar caracteristicile pot fi limitate.
Găsiți mai multe actualizări. Utilizați SupportAssist pentru a găsi cele mai recente actualizări ale driverelor pentru dispozitivul dvs.
Fixes & Enhancements
This update corrects an issue where MS Windows 2000/XP can inadvertently decrease performance due to an internal setting on the hard drive.
Citiți mai multeVersiune
TK300-09, A01
Data lansării:
19 ian. 2007
Tip de descărcare
Firmware
Categorie
IDE/EIDE
Importanță
RecommendedDell Technologies recomandă aplicarea acestei actualizări în următorul ciclu de actualizare programat. Actualizarea conține modificări pentru menținerea stării generale de funcționare a sistemului. Acesta asigură faptul că software-ul sistemului rămâne actual și compatibil cu alte module de sistem (firmware, BIOS, drivere și software) și poate include alte caracteristici noi.
Formate disponibile
Format fișier ZipPack External
Nume fișier: R139989.EXE
Dimensiune fișier: 258.78 KB
Acesta este un fișier mare. În funcție de viteza conexiunii, descărcarea poate dura mai mult timp.
Descriere format:
This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.
Pentru a asigura integritatea descărcării, verificați valoarea cifrei de control.
MD5:
3f300ca50f9c80a17d3d42a6fba547bf
SHA1:
Not available
SHA-256:
Not available
Format fișier One or more self extracting disk images inside of a self extracting zip
Nume fișier: BR139989.exe
Dimensiune fișier: 1.14 MB
Acesta este un fișier mare. În funcție de viteza conexiunii, descărcarea poate dura mai mult timp.
Descriere format:
This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, then double-click it to unzip the set of files. Follow the instructions to complete the installation.
Pentru a asigura integritatea descărcării, verificați valoarea cifrei de control.
MD5:
c5afdd1ff6f735ab8dcb9cc01a3add92
SHA1:
Not available
SHA-256:
Not available
Prin descărcare, acceptați termenii Dell Software License Agreement.
Sisteme de operare acceptate
Windows 2000
Windows XP
Windows XP pe 64 de biți
Instrucțiuni de instalare
Custom Instructions for R139989.EXE:
Alternative Flash process (no floppy available)
(PLEASE MAKE SURE A/C POWER IS BEING USED WHILE UPDATING YOUR HARD DRIVE)
1. The files contained in (R139989.EXE) should be extracted to bootable media. (ie. Floppy, CD, Zip drive, USB Flash Memory). The default extraction directory is C:\DELL\DRIVERS\R139989.EXE.
2. Once the files are extracted, copy the contents of C:\DELL\DRIVERS\R139989.EXE\FILES directory to bootable source. Boot to that source.
3. The Samsung Sflash utility will start automatically.
4. The utility will only update the models listed above in this release.
5. The application will report "Updated Successfully".
6. Once completed you will be left at a DOS prompt.
7. Remove the bootable media and power off your system.
8. Restart your system.
Floppy Disk Boot to Disk for BR139989.exe
Download
1. Click Download Now, to download the file.
2. When the File Download window appears, click Save (Windows XP users will click Save) this program to disk and click OK. The Save In:
window appears.
3. From the Save In: field, click the down arrow then click to
select Desktop and click Save. The file will download to your desktop.
4. If the Download Complete window appears, click Close. The file
icon appears on your desktop.
Hard Drive Floppy Disk Creation
1. Get 1 blank, formatted floppy disks.
2. Double-click the new icon (it looks like a floppy diskette) on
the desktop. The Self-Extractor window appears.
3. Click Setup. An black MS-DOS window appears with a message
indicating that you need 1 floppy diskettes.
4. Press the [ENTER] key.
A message appears prompting you to insert a blank floppy diskette.
5. Insert a floppy disk into the floppy disk drive.
6. Press the [ENTER] key. A message appears indicating that all
data on the disk will be erased.
7. Press the [y] key and then press the [ENTER] key.
The files are copied to the floppy diskette. If the procedure requires
more than one diskette, repeat steps 5 – 7 until you reach the end of the diskette set.
8. After all the files have been copied to the last floppy disk,
press the [ENTER] key and the MS-DOS window closes.
Install
1. Insert the first (or the only) disk of the set into the Floppy
drive.
2. Click Start, click Shutdown, click Restart, and then click OK.
Windows XP Users need only click restart.
3. Follow the on-screen instructions.
Alternative Flash process (no floppy available)
(PLEASE MAKE SURE A/C POWER IS BEING USED WHILE UPDATING YOUR HARD DRIVE)
1. The files contained in (R139989.EXE) should be extracted to bootable media. (ie. Floppy, CD, Zip drive, USB Flash Memory). The default extraction directory is C:\DELL\DRIVERS\R139989.EXE.
2. Once the files are extracted, copy the contents of C:\DELL\DRIVERS\R139989.EXE\FILES directory to bootable source. Boot to that source.
3. The Samsung Sflash utility will start automatically.
4. The utility will only update the models listed above in this release.
5. The application will report "Updated Successfully".
6. Once completed you will be left at a DOS prompt.
7. Remove the bootable media and power off your system.
8. Restart your system.
Floppy Disk Boot to Disk for BR139989.exe
Download
1. Click Download Now, to download the file.
2. When the File Download window appears, click Save (Windows XP users will click Save) this program to disk and click OK. The Save In:
window appears.
3. From the Save In: field, click the down arrow then click to
select Desktop and click Save. The file will download to your desktop.
4. If the Download Complete window appears, click Close. The file
icon appears on your desktop.
Hard Drive Floppy Disk Creation
1. Get 1 blank, formatted floppy disks.
2. Double-click the new icon (it looks like a floppy diskette) on
the desktop. The Self-Extractor window appears.
3. Click Setup. An black MS-DOS window appears with a message
indicating that you need 1 floppy diskettes.
4. Press the [ENTER] key.
A message appears prompting you to insert a blank floppy diskette.
5. Insert a floppy disk into the floppy disk drive.
6. Press the [ENTER] key. A message appears indicating that all
data on the disk will be erased.
7. Press the [y] key and then press the [ENTER] key.
The files are copied to the floppy diskette. If the procedure requires
more than one diskette, repeat steps 5 – 7 until you reach the end of the diskette set.
8. After all the files have been copied to the last floppy disk,
press the [ENTER] key and the MS-DOS window closes.
Install
1. Insert the first (or the only) disk of the set into the Floppy
drive.
2. Click Start, click Shutdown, click Restart, and then click OK.
Windows XP Users need only click restart.
3. Follow the on-screen instructions.
Ajutor și tutoriale pentru drivere
Pentru mai multe descărcări, accesați Drivere și descărcări. Pentru ajutor privind utilizarea informațiilor de pe această pagină, accesați Tutoriale și ajutor pentru drivere.