Dell PowerVault 35F, D9908E
INSTALATE AUTOMAT Acest fișier a fost instalat automat ca parte a unei actualizări recente. Dacă întâmpinați orice probleme, puteți descărca și reinstala manual.Conținutul acestei pagini este posibil să fi fost tradus automat. Pentru a furniza feedback, completați formularul din partea de jos a paginii.
PowerVault 35F firmware version d9908e.
Recomandate
Găsiți cea mai bună descărcare pentru sistemul dvs.
Introduceți detaliile produsului pentru a vedea cele mai recente informații despre driverele sistemului dvs.Asistență căutare
Introduceți eticheta de service Dell sau modelul
Doriți să vă căutați produsul? Introduceți un identificator de produs. Arătați-mi cum
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Conectați-vă la Windows ca administrator pentru a utiliza scanarea automată. Dacă sunteți deja conectat ca administrator și vedeți acest mesaj, reporniți sistemul. Sistemul dvs. este gestionat de către administratorul IT, iar caracteristicile pot fi limitate.
Găsiți mai multe actualizări. Utilizați SupportAssist pentru a găsi cele mai recente actualizări ale driverelor pentru dispozitivul dvs.
Versiune
d9908e, D9908E
Data lansării:
06 feb. 2001
Tip de descărcare
Firmware
Categorie
Fibre Channel
Importanță
OptionalDell Technologies recommends reviewing this update to determine if it applies to your system. The update contains changes that impact only certain configurations or provides new features that may or may not apply to your environment.
Formate disponibile
Format fișier One or more self extracting disk images inside of a self extracting zip
Nume fișier: D9908E.exe
Dimensiune fișier: 553 KB
Acesta este un fișier mare. În funcție de viteza conexiunii, descărcarea poate dura mai mult timp.
Descriere format:
This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, then double-click it to unzip the set of files. Follow the instructions to complete the installation.
Pentru a asigura integritatea descărcării, verificați valoarea cifrei de control.
MD5:
af7f581a2ef46319201864a1164038a7
SHA1:
Not available
SHA-256:
Not available
Prin descărcare, acceptați termenii Dell Software License Agreement.
Instrucțiuni de instalare
PowerVault 35F Firmware Download Instructions
The PowerVault 35F can either use FTP, TFTP or a serial connection
(using the XMODEM protocol) to update the firmware. In order to
update the firmware via the serial connection, the PowerVault 35F
must be connected to a terminal emulation program supporting
XMODEM transfers. This menu item does not appear when accessing
the configuration menus through Telnet.
To download firmware using FTP:
1. Connect your computer to the PowerVault 35F’ s Ethernet port.
2. Start your FTP program using the PowerVault 35F’ s IP address:
ftp
Note: The default IP address is 1.1.1.1. See the Change IP
Address section of this chapter for information on changing
the PowerVault 35F IP address.
3. Use root as the user name and password as the password.
To change the user name and password, see the Change Security
Settings section of this chapter.
4. Specify binary mode:
bin
5. Specify the firmware’s path and filename with the put command:
put
The file will transfer and the PowerVault 35F will reboot. The
PowerVault 35F is now using the new firmware.
NOTE: You may want to confirm the new firmware level by
checking the PowerVault 35F’s reboot messages through the
serial interface.
To download firmware using TFTP:
1. Connect your computer using the PowerVault 35F’s
Ethernet port.
2. At the command line, type the following command:
tftp -i put
The file will tranfer and the PowerVault 35F will
reboot. The PowerVault 35F is now using the new
firmware.
NOTE: You may want to confirm the new firmware level by
checking the PowerVault 35F’ s reboot messages through
the serial interface.
To download firmware using a terminal emulator:
NOTE: For quicker downloading, configure the PowerVault 35F
and the terminal emulator utility session connected to it
(such as Hyperterminal) to run at 115200.
1. Establish a Serial Connection to the PowerVault 35F.
2. From the Advanced Options menu, select the Download a
new revision of the Firmware command to start the download
procedure.
3. When you confirm you want to download, the PowerVault 35F
will start the download process.
4. Use the Transfer® Send File option in the terminal emulator
utility.
5. Select the location of the firmware. Use the Browse button,
if you need help finding it.
6. Make sure you select XMODEM as the protocol.
7. Press the Send button.
8. The firmware will begin to download.
When the download is complete, the system verifies that the
firmware image was successfully written to the FLASH memory and
then reboots the PowerVault 35F. Upon reboot, the PowerVault 35F
detects that there is a newly downloaded firmware image and
copies that image to the boot sector of the FLASH and then boots
with that image. At that point the PowerVault 35F is using the
new firmware image.
The PowerVault 35F can either use FTP, TFTP or a serial connection
(using the XMODEM protocol) to update the firmware. In order to
update the firmware via the serial connection, the PowerVault 35F
must be connected to a terminal emulation program supporting
XMODEM transfers. This menu item does not appear when accessing
the configuration menus through Telnet.
To download firmware using FTP:
1. Connect your computer to the PowerVault 35F’ s Ethernet port.
2. Start your FTP program using the PowerVault 35F’ s IP address:
ftp
Note: The default IP address is 1.1.1.1. See the Change IP
Address section of this chapter for information on changing
the PowerVault 35F IP address.
3. Use root as the user name and password as the password.
To change the user name and password, see the Change Security
Settings section of this chapter.
4. Specify binary mode:
bin
5. Specify the firmware’s path and filename with the put command:
put
The file will transfer and the PowerVault 35F will reboot. The
PowerVault 35F is now using the new firmware.
NOTE: You may want to confirm the new firmware level by
checking the PowerVault 35F’s reboot messages through the
serial interface.
To download firmware using TFTP:
1. Connect your computer using the PowerVault 35F’s
Ethernet port.
2. At the command line, type the following command:
tftp -i
The file will tranfer and the PowerVault 35F will
reboot. The PowerVault 35F is now using the new
firmware.
NOTE: You may want to confirm the new firmware level by
checking the PowerVault 35F’ s reboot messages through
the serial interface.
To download firmware using a terminal emulator:
NOTE: For quicker downloading, configure the PowerVault 35F
and the terminal emulator utility session connected to it
(such as Hyperterminal) to run at 115200.
1. Establish a Serial Connection to the PowerVault 35F.
2. From the Advanced Options menu, select the Download a
new revision of the Firmware command to start the download
procedure.
3. When you confirm you want to download, the PowerVault 35F
will start the download process.
4. Use the Transfer® Send File option in the terminal emulator
utility.
5. Select the location of the firmware. Use the Browse button,
if you need help finding it.
6. Make sure you select XMODEM as the protocol.
7. Press the Send button.
8. The firmware will begin to download.
When the download is complete, the system verifies that the
firmware image was successfully written to the FLASH memory and
then reboots the PowerVault 35F. Upon reboot, the PowerVault 35F
detects that there is a newly downloaded firmware image and
copies that image to the boot sector of the FLASH and then boots
with that image. At that point the PowerVault 35F is using the
new firmware image.
Ajutor și tutoriale pentru drivere
Pentru mai multe descărcări, accesați Drivere și descărcări. Pentru ajutor privind utilizarea informațiilor de pe această pagină, accesați Tutoriale și ajutor pentru drivere.