Seagate ST9160418ASG 160GB/ST9250464ASG 250GB 2.5 7200 S2 HDD Firmware Update
INSTALATE AUTOMAT Acest fișier a fost instalat automat ca parte a unei actualizări recente. Dacă întâmpinați orice probleme, puteți descărca și reinstala manual.This package provides the Seagate ST9160418ASG 160GB/ST9250464ASG 250GB 2.5 7200 S2 HDD Firmware Update and is supported on Latitude, Optiplex, Precision and Vostro models that are running the following Windows Operating Systems: XP, Vista and Windows 7.
Găsiți cea mai bună descărcare pentru sistemul dvs.
Introduceți detaliile produsului pentru a vedea cele mai recente informații despre driverele sistemului dvs.Asistență căutare
Introduceți eticheta de service Dell sau modelul
Doriți să vă căutați produsul? Introduceți un identificator de produs. Arătați-mi cum
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Găsiți mai multe actualizări. Utilizați SupportAssist pentru a găsi cele mai recente actualizări ale driverelor pentru dispozitivul dvs.
Fixes & Enhancements
Fixes - Fixed clicking noise Enhancements - Not applicable
Versiune
Data lansării:
Tip de descărcare
Categorie
Importanță
RecommendedPrin descărcare, acceptați termenii Dell Software License Agreement.
1. Please make sure A/C power is being used while updating your hard drive. 2. Please do not interupt the firmware update process.
Custom Instructions for R250673.EXE: PLEASE PRINT THE FOLLOWING INSTRUCTIONS/For Bootable CD option (PLEASE MAKE SURE A/C POWER IS BEING USED WHILE UPDATING YOUR HARD DRIVE) 1. Click on the (R250673.EXE) file and select "RUN" then "RUN" again. 2. Press "Continue" then "OK" to extract the files to the provided location. 3. If you have CD imaging software that supports the .ISO image format the file "C:\DELL\Drivers\R250673\Seagate Utility.ISO" is an image for a bootable CD that will automatically run the application. 4. Boot to the CD. 5. The Seagate utility will start automatically. 6. The utility will autoscan and update the appropiate Seagate ST9160418ASG & ST9250464ASG. 7. Once completed, a message detailing drive model, serial number and updated 4SDM1 or 5SDM1 firmware will appear. 8. Remove the CD and power off your PC. 9. Power on your PC to continue normal operation. For Other Bootable option (IE. USB key, etc.) (PLEASE MAKE SURE A/C POWER IS BEING USED WHILE UPDATINGYOUR HARD DRIVE) - Click on the (R250673.EXE) file and select "RUN" then "RUN" again. - Press "Continue" then "OK" to extract the files to the provided location. - The files are located in "C:\DELL\Drivers\R250673\Files" directory. - Add the files to your bootable media and run the "FLASH.bat". - The Seagate utility will start automatically. - The utility will autoscan and update the appropiate Seagate ST9160418ASG & ST9250464ASG. - Once completed, a message detailing drive model, serial number and updated 4SDM1 or 5SDM1 firmware will appear. - Remove the Bootable Media and power off your system.