Dell Microsoft Hotfix and KB Updates for NAS, v.1.1.0.0, A00
INSTALATE AUTOMAT Acest fișier a fost instalat automat ca parte a unei actualizări recente. Dacă întâmpinați orice probleme, puteți descărca și reinstala manual.Conținutul acestei pagini este posibil să fi fost tradus automat. Pentru a furniza feedback, completați formularul din partea de jos a paginii.
This contains Windows Storage Server 2008 Update 1 and Update 2 which consist of updates for the following issues:
• KB968675 - Storport Update
This update prevents a memory leak that is caused by a temporary unit condition.
• KB970662 - Single Instance Storage (SIS) Update
This update resolves the following issues with SIS:
A memory leak can occur with Groveler.exe if a forced rescan is initiated.
There can be timing issues in SIS copy-on-first-write operations.
NTFS re-ordering might be incorrectly handled after a forced shutdown.
• KB971191 - SIS links that have file sizes less than 1KB get set to normal files after restoring SIS v1 data to a SIS v2 volume.
This issue can occur when backing up and restoring SIS files (links) that have been truncated to a length less than or equal to 1 KB from a migrated Windows Storage Server 2003 R2 SIS-enabled volume to Windows Storage Server 2008.
• KB970658 – iSCSI initiator appears to fail on reconnection
After a lost iSCSI initiator connection is recovered, the session state in iSCSI Initiator interface may continue to display "Reconnecting." This issue only applies to application servers connecting to Microsoft iSCSI Software Target using the iSCSI Initiator.
• KB971365 – Added support for GPT disks greater than 2TB.
This update supports assigning a GPT disk (greater than or equal to 2TB) to a failover cluster using the Share and Storage Management MMC snap-in.
• KB974564 - Single Instance Storage (SIS) Update
This update resolves the following issues with the SIS filter driver:
The SIS filter incorrectly uses paged memory for copy-on-first-write requests and SI_COPY_THREAD_REQUEST.
SIS may corrupt link files that have data written beyond end-of-file (EOF). This update prevents the issue.
NOTE: SIS is only available on the Standard and Enterprise editions of the operating system. Only the necessary updates will be applied to the system.
• KB968675 - Storport Update
This update prevents a memory leak that is caused by a temporary unit condition.
• KB970662 - Single Instance Storage (SIS) Update
This update resolves the following issues with SIS:
A memory leak can occur with Groveler.exe if a forced rescan is initiated.
There can be timing issues in SIS copy-on-first-write operations.
NTFS re-ordering might be incorrectly handled after a forced shutdown.
• KB971191 - SIS links that have file sizes less than 1KB get set to normal files after restoring SIS v1 data to a SIS v2 volume.
This issue can occur when backing up and restoring SIS files (links) that have been truncated to a length less than or equal to 1 KB from a migrated Windows Storage Server 2003 R2 SIS-enabled volume to Windows Storage Server 2008.
• KB970658 – iSCSI initiator appears to fail on reconnection
After a lost iSCSI initiator connection is recovered, the session state in iSCSI Initiator interface may continue to display "Reconnecting." This issue only applies to application servers connecting to Microsoft iSCSI Software Target using the iSCSI Initiator.
• KB971365 – Added support for GPT disks greater than 2TB.
This update supports assigning a GPT disk (greater than or equal to 2TB) to a failover cluster using the Share and Storage Management MMC snap-in.
• KB974564 - Single Instance Storage (SIS) Update
This update resolves the following issues with the SIS filter driver:
The SIS filter incorrectly uses paged memory for copy-on-first-write requests and SI_COPY_THREAD_REQUEST.
SIS may corrupt link files that have data written beyond end-of-file (EOF). This update prevents the issue.
NOTE: SIS is only available on the Standard and Enterprise editions of the operating system. Only the necessary updates will be applied to the system.
Recomandate
Găsiți cea mai bună descărcare pentru sistemul dvs.
Introduceți detaliile produsului pentru a vedea cele mai recente informații despre driverele sistemului dvs.Asistență căutare
Introduceți eticheta de service Dell sau modelul
Doriți să vă căutați produsul? Introduceți un identificator de produs. Arătați-mi cum
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Conectați-vă la Windows ca administrator pentru a utiliza scanarea automată. Dacă sunteți deja conectat ca administrator și vedeți acest mesaj, reporniți sistemul. Sistemul dvs. este gestionat de către administratorul IT, iar caracteristicile pot fi limitate.
Găsiți mai multe actualizări. Utilizați SupportAssist pentru a găsi cele mai recente actualizări ale driverelor pentru dispozitivul dvs.
Fixes & Enhancements
This contains Windows Storage Server 2008 Update 1 and Update 2 which consist of updates for the following issues:
• KB968675 - Storport Update
This update prevents a memory leak that is caused by a temporary unit condition.
• KB970662 - Single Instance Storage (SIS) Update
This update resolves the following issues with SIS:
A memory leak can occur with Groveler.exe if a forced rescan is initiated.
There can be timing issues in SIS copy-on-first-write operations.
NTFS re-ordering might be incorrectly handled after a forced shutdown.
• KB971191 - SIS links that have file sizes less than 1KB get set to normal files after restoring SIS v1 data to a SIS v2 volume.
This issue can occur when backing up and restoring SIS files (links) that have been truncated to a length less than or equal to 1 KB from a migrated Windows Storage Server 2003 R2 SIS-enabled volume to Windows Storage Server 2008.
• KB970658 – iSCSI initiator appears to fail on reconnection
After a lost iSCSI initiator connection is recovered, the session state in iSCSI Initiator interface may continue to display "Reconnecting." This issue only applies to application servers connecting to Microsoft iSCSI Software Target using the iSCSI Initiator.
• KB971365 – Added support for GPT disks greater than 2TB.
This update supports assigning a GPT disk (greater than or equal to 2TB) to a failover cluster using the Share and Storage Management MMC snap-in.
• KB974564 - Single Instance Storage (SIS) Update
This update resolves the following issues with the SIS filter driver:
The SIS filter incorrectly uses paged memory for copy-on-first-write requests and SI_COPY_THREAD_REQUEST.
SIS may corrupt link files that have data written beyond end-of-file (EOF). This update prevents the issue.
NOTE: SIS is only available on the Standard and Enterprise editions of the operating system. Only the necessary updates will be applied to the system.
Citiți mai multe• KB968675 - Storport Update
This update prevents a memory leak that is caused by a temporary unit condition.
• KB970662 - Single Instance Storage (SIS) Update
This update resolves the following issues with SIS:
A memory leak can occur with Groveler.exe if a forced rescan is initiated.
There can be timing issues in SIS copy-on-first-write operations.
NTFS re-ordering might be incorrectly handled after a forced shutdown.
• KB971191 - SIS links that have file sizes less than 1KB get set to normal files after restoring SIS v1 data to a SIS v2 volume.
This issue can occur when backing up and restoring SIS files (links) that have been truncated to a length less than or equal to 1 KB from a migrated Windows Storage Server 2003 R2 SIS-enabled volume to Windows Storage Server 2008.
• KB970658 – iSCSI initiator appears to fail on reconnection
After a lost iSCSI initiator connection is recovered, the session state in iSCSI Initiator interface may continue to display "Reconnecting." This issue only applies to application servers connecting to Microsoft iSCSI Software Target using the iSCSI Initiator.
• KB971365 – Added support for GPT disks greater than 2TB.
This update supports assigning a GPT disk (greater than or equal to 2TB) to a failover cluster using the Share and Storage Management MMC snap-in.
• KB974564 - Single Instance Storage (SIS) Update
This update resolves the following issues with the SIS filter driver:
The SIS filter incorrectly uses paged memory for copy-on-first-write requests and SI_COPY_THREAD_REQUEST.
SIS may corrupt link files that have data written beyond end-of-file (EOF). This update prevents the issue.
NOTE: SIS is only available on the Standard and Enterprise editions of the operating system. Only the necessary updates will be applied to the system.
Versiune
1.1.0.0, A00
Data lansării:
12 apr. 2010
Tip de descărcare
Aplicații
Categorie
Sistem de operare
Importanță
RecommendedDell Technologies recomandă aplicarea acestei actualizări în următorul ciclu de actualizare programat. Actualizarea conține modificări pentru menținerea stării generale de funcționare a sistemului. Acesta asigură faptul că software-ul sistemului rămâne actual și compatibil cu alte module de sistem (firmware, BIOS, drivere și software) și poate include alte caracteristici noi.
Formate disponibile
Format fișier Actualizați pachetul pentru MS Windows pe 32 de biți
Nume fișier: APP_WIN_R255746.EXE
Dimensiune fișier: 4.21 MB
Acesta este un fișier mare. În funcție de viteza conexiunii, descărcarea poate dura mai mult timp.
Descriere format:
Dell Update Packages (DUP) in Microsoft Windows 32bit format have been designed to run on Microsoft Windows 64bit Operating Systems. Dell Update Packages (DUP) in Microsoft Windows 64bit format will only run on Microsoft Windows 64bit Operating Systems. When selecting a device driver update be sure to select the one that is appropriate for your operating system.
Pentru a asigura integritatea descărcării, verificați valoarea cifrei de control.
MD5:
84EDDC6DD74CAD8EFBA0EE16E185B504
SHA1:
Not available
SHA-256:
Not available
Prin descărcare, acceptați termenii Dell Software License Agreement.
Sisteme de operare acceptate
Windows Server 2008 x64
Instrucțiuni de instalare
Custom Instructions for APP_WIN_R255746.EXE:
This release contains updates for the PowerVault NAS Windows Storage Server 2008 based systems.
Download and Install Instructions
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
3. Copy the package to a USB key, removable media, or network share that is accessible by the PowerVault NAS system that will be updated.
4. Log into the PowerVault NAS system and browse for the software package that was downloaded.
5. Double click on the package, only the updates applicable to your Operating System Edition (Basic, Standard, Enterprise) will be installed.
6. If the PowerVault NAS system does not reboot automatically, please reboot the system manually.
This release contains updates for the PowerVault NAS Windows Storage Server 2008 based systems.
Download and Install Instructions
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
3. Copy the package to a USB key, removable media, or network share that is accessible by the PowerVault NAS system that will be updated.
4. Log into the PowerVault NAS system and browse for the software package that was downloaded.
5. Double click on the package, only the updates applicable to your Operating System Edition (Basic, Standard, Enterprise) will be installed.
6. If the PowerVault NAS system does not reboot automatically, please reboot the system manually.
Ajutor și tutoriale pentru drivere
Pentru mai multe descărcări, accesați Drivere și descărcări. Pentru ajutor privind utilizarea informațiilor de pe această pagină, accesați Tutoriale și ajutor pentru drivere.