American Megatrends (AMI) PERC2/DC, v.1.06, A04

INSTALATE AUTOMAT Acest fișier a fost instalat automat ca parte a unei actualizări recente. Dacă întâmpinați orice probleme, puteți descărca și reinstala manual.
Conținutul acestei pagini este posibil să fi fost tradus automat. Pentru a furniza feedback, completați formularul din partea de jos a paginii.
This firmware release creates a bootable firmware update diskette for Dell
PERC 2/DC controller.
Recomandate

Găsiți cea mai bună descărcare pentru sistemul dvs.

Introduceți detaliile produsului pentru a vedea cele mai recente informații despre driverele sistemului dvs.

Asistență căutare

Introduceți eticheta de service Dell sau modelul

Doriți să vă căutați produsul? Introduceți un identificator de produs. Arătați-mi cum

This driver is not compatible

This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.

Găsiți mai multe actualizări. Utilizați SupportAssist pentru a găsi cele mai recente actualizări ale driverelor pentru dispozitivul dvs.

Fixes & Enhancements

Firmware Bug Fixes:
-------------------
1. Norton Anti-Virus software was issuing reads for LBA out of
range. The firmware was not handling it properly resulting
in failing of drives. This is fixed. If the LBA is out of
range the command is rejected without sending it to SCSI
module.

2. EVPD INQ data (HDD serial number) is now returned correctly.
Previously it was considered as normal INQ and the return
data was interpreted incorrectly.

3. Deleting the first created virtual disk on Vail used to hard
lock the system in W2K. When the driver sends a command to
the firmware, it is queued in the firmware internal queue.
This command is picked up for processing by the firmware at
a later point of time. When a Delete Config call comes the
firmware first finishes all the pending rd/wr commands for
all the logical drives and then completes the Delete Config
Call. Now if a rd/wr call comes on the logical drive being
deleted before the Delete Config call is completed the firmware
was never picking it up from the internal queue. This was the
bug. Now the firmware clears these pending commands with error
that have come in between the "arrival of DeleteConfig and
completion of DeleteConfig".

Firmware Enhancements
---------------------
1. PowerVault 220S and PowerVault 221S support added. The
firmware previously was asking for 12 drive information on
SAF-TE calls. Now it asks for 16 drives.
Citiți mai multe

Versiune

1.06, A04

Data lansării:

09 ian. 2002

Tip de descărcare

Firmware

Categorie

Configurații RAID pentru SCSI

Importanță

Optional
Dell Technologies recommends reviewing this update to determine if it applies to your system. The update contains changes that impact only certain configurations or provides new features that may or may not apply to your environment.
Formate disponibile
Format fișier One or more self extracting disk images inside of a self extracting zip
Nume fișier: p2dc106a.exe
Dimensiune fișier: 611 KB
Acesta este un fișier mare. În funcție de viteza conexiunii, descărcarea poate dura mai mult timp.
Descriere format:
This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, then double-click it to unzip the set of files. Follow the instructions to complete the installation.
Pentru a asigura integritatea descărcării, verificați valoarea cifrei de control.
MD5:
Not available
SHA1:
Not available
SHA-256:
Not available

Prin descărcare, acceptați termenii Dell Software License Agreement.