Dell PowerConnect 3248, v. 1.31, A01
INSTALATE AUTOMAT Acest fișier a fost instalat automat ca parte a unei actualizări recente. Dacă întâmpinați orice probleme, puteți descărca și reinstala manual.Conținutul acestei pagini este posibil să fi fost tradus automat. Pentru a furniza feedback, completați formularul din partea de jos a paginii.
General Discription
The Dell™ PowerConnect™ Switch Manager for OpenView Network Node Manager (NNM) is specifically designed to support the efforts of technical staff responsible for network management and maintenance. This software provides a user-friendly interface for managing various Dell network devices
with HP OpenView NNM under Microsoft® Windows NT®/2000
This software supported the PowerConnect 3248 Fast Ethernet Managed Switch and the PowerConnect 5224 Gigabit Ethernet Managed Switch.
The Dell PowerConnect Switch Manager allows you to monitor the activity on any switch, or designated port, and automatically respond if the traffic load exceeds predefined parameters. It provides all the tools needed to monitor the network and make the changes required to avoid major crises ahead of time.
The Dell PowerConnect Switch Manager is based on Simple Network Management Protocol (SNMP), providing graphic-based interactive management of Dell’s intelligent Ethernet switch systems. The device modules display the front panels of the managed device showing port status, and provide functional control for its ports and other advanced features.
The Dell™ PowerConnect™ Switch Manager for OpenView Network Node Manager (NNM) is specifically designed to support the efforts of technical staff responsible for network management and maintenance. This software provides a user-friendly interface for managing various Dell network devices
with HP OpenView NNM under Microsoft® Windows NT®/2000
This software supported the PowerConnect 3248 Fast Ethernet Managed Switch and the PowerConnect 5224 Gigabit Ethernet Managed Switch.
The Dell PowerConnect Switch Manager allows you to monitor the activity on any switch, or designated port, and automatically respond if the traffic load exceeds predefined parameters. It provides all the tools needed to monitor the network and make the changes required to avoid major crises ahead of time.
The Dell PowerConnect Switch Manager is based on Simple Network Management Protocol (SNMP), providing graphic-based interactive management of Dell’s intelligent Ethernet switch systems. The device modules display the front panels of the managed device showing port status, and provide functional control for its ports and other advanced features.
Recomandate
Găsiți cea mai bună descărcare pentru sistemul dvs.
Introduceți detaliile produsului pentru a vedea cele mai recente informații despre driverele sistemului dvs.Asistență căutare
Introduceți eticheta de service Dell sau modelul
Doriți să vă căutați produsul? Introduceți un identificator de produs. Arătați-mi cum
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Conectați-vă la Windows ca administrator pentru a utiliza scanarea automată. Dacă sunteți deja conectat ca administrator și vedeți acest mesaj, reporniți sistemul. Sistemul dvs. este gestionat de către administratorul IT, iar caracteristicile pot fi limitate.
Găsiți mai multe actualizări. Utilizați SupportAssist pentru a găsi cele mai recente actualizări ale driverelor pentru dispozitivul dvs.
Fixes & Enhancements
None
Citiți mai multeVersiune
1.31, A01
Data lansării:
25 iul. 2002
Tip de descărcare
Aplicații
Categorie
Rețea
Importanță
OptionalDell Technologies recommends reviewing this update to determine if it applies to your system. The update contains changes that impact only certain configurations or provides new features that may or may not apply to your environment.
Formate disponibile
Format fișier Extrage fișiere direct pe discul local
Nume fișier: PWRNTSM.zip
Dimensiune fișier: 5.1 MB
Acesta este un fișier mare. În funcție de viteza conexiunii, descărcarea poate dura mai mult timp.
Descriere format:
This file format consists of an archive of files that may be decompressed to a directory on the hard drive. The installation can then be done from that directory.
Pentru a asigura integritatea descărcării, verificați valoarea cifrei de control.
MD5:
Not available
SHA1:
Not available
SHA-256:
Not available
Prin descărcare, acceptați termenii Dell Software License Agreement.
Instrucțiuni de instalare
*****This file contains a compressed (or zipped) set of files. You will
need a compression tool such as WinZip. Download the file to a folder on
your hard drive, and then run (double-click) it to unzip the set of files.
Follow the instructions and then use the Upgrade Instructions to complete
the installation.
Software Installation
The setup program will install the Dell PowerConnect Switch Manager This
program decompresses files and copies them to a location you specify on
your hard disk. During installation you will be prompted to assign the
program group.
NOTE: Install HP OpenView NNM on your platform before installing this
package. You will be asked to provide your OpenView directory during the
installation process for the Dell PowerConnect Switch Manager.
Installation steps:
1. Start Windows.
2. Use the NNM Services Stop command to stop all HP OpenView NNM
background processes, if any. (This has the same effect as executing
ovstop from the command line.)
3. Download DellPwrConnectSwitchMgr.exe from Dell’s support website (
http://support.dell.com). Copy the self extractable
DellPwrConnectSwitchMgr.exe to the temp directory.
4. Type DellPwrConnectSwitchMgr.exe at the command prompt and unzip to
the temp directory.
5. Type SETUP at the Command Prompt.
6. Click OK to start setup.
7. Follow the on-screen instructions to install the software.
need a compression tool such as WinZip. Download the file to a folder on
your hard drive, and then run (double-click) it to unzip the set of files.
Follow the instructions and then use the Upgrade Instructions to complete
the installation.
Software Installation
The setup program will install the Dell PowerConnect Switch Manager This
program decompresses files and copies them to a location you specify on
your hard disk. During installation you will be prompted to assign the
program group.
NOTE: Install HP OpenView NNM on your platform before installing this
package. You will be asked to provide your OpenView directory during the
installation process for the Dell PowerConnect Switch Manager.
Installation steps:
1. Start Windows.
2. Use the NNM Services Stop command to stop all HP OpenView NNM
background processes, if any. (This has the same effect as executing
ovstop from the command line.)
3. Download DellPwrConnectSwitchMgr.exe from Dell’s support website (
http://support.dell.com). Copy the self extractable
DellPwrConnectSwitchMgr.exe to the temp directory.
4. Type DellPwrConnectSwitchMgr.exe at the command prompt and unzip to
the temp directory.
5. Type SETUP at the Command Prompt.
6. Click OK to start setup.
7. Follow the on-screen instructions to install the software.
Need help with network connection issues?
Find a solution in Dell's network troubleshooting and usage guide.Ajutor și tutoriale pentru drivere
Pentru mai multe descărcări, accesați Drivere și descărcări. Pentru ajutor privind utilizarea informațiilor de pe această pagină, accesați Tutoriale și ajutor pentru drivere.