Do not turn off your computer or disconnect from the power source while updating the BIOS as this could harm your computer. During the update, your computer will restart and you may briefly see a black screen.
Before updating, please read the installation instructions and important information noted below.
Dell PowerVault BIOS, A06
INSTALATE AUTOMAT Acest fișier a fost instalat automat ca parte a unei actualizări recente. Dacă întâmpinați orice probleme, puteți descărca și reinstala manual.Conținutul acestei pagini este posibil să fi fost tradus automat. Pentru a furniza feedback, completați formularul din partea de jos a paginii.
PowerVault 715N, BIOS, version A06
Recomandate
Găsiți cea mai bună descărcare pentru sistemul dvs.
Introduceți detaliile produsului pentru a vedea cele mai recente informații despre driverele sistemului dvs.Asistență căutare
Introduceți eticheta de service Dell sau modelul
Doriți să vă căutați produsul? Introduceți un identificator de produs. Arătați-mi cum
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Conectați-vă la Windows ca administrator pentru a utiliza scanarea automată. Dacă sunteți deja conectat ca administrator și vedeți acest mesaj, reporniți sistemul. Sistemul dvs. este gestionat de către administratorul IT, iar caracteristicile pot fi limitate.
Găsiți mai multe actualizări. Utilizați SupportAssist pentru a găsi cele mai recente actualizări ale driverelor pentru dispozitivul dvs.
Fixes & Enhancements
This BIOS version provides the latest hardware support for the PV715N
Citiți mai multeVersiune
A06, A06
Data lansării:
19 sept. 2002
Tip de descărcare
Interfața BIOS
Categorie
BIOS
Importanță
OptionalDell Technologies recommends reviewing this update to determine if it applies to your system. The update contains changes that impact only certain configurations or provides new features that may or may not apply to your environment.
Formate disponibile
Format fișier Extrage fișiere direct pe discul local
Nume fișier: 715NA06.exe
Dimensiune fișier: 469.14 KB
Acesta este un fișier mare. În funcție de viteza conexiunii, descărcarea poate dura mai mult timp.
Descriere format:
This file format consists of an archive of files that may be decompressed to a directory on the hard drive. The installation can then be done from that directory.
Pentru a asigura integritatea descărcării, verificați valoarea cifrei de control.
MD5:
Not available
SHA1:
Not available
SHA-256:
Not available
Prin descărcare, acceptați termenii Dell Software License Agreement.
Sisteme de operare acceptate
Nu se aplică
Instrucțiuni de instalare
Default Instructions for 715NA06.exe:
To upgrade your system BIOS, perform the following steps:
1. Download the 715NA06 BIOS revision.
2. Run the downloaded executable file to extract the files to your hard
drive. The default extraction directory is c:\Dell\PV715NBIOS.
3. Using a null modem serial cable, connect the client system to the
appliance.
4. Turn on the client system and set up a Hyperterminal connection.
a. Click the Start button and point to Programs—>Accessories—
>Hyperterminal —>Hyperterminal.
b. Select 115200 for the Bits per second, 8 for Data Bits, None for
Parity, 1 for Stop Bits, and Xon\Xoff for Flow control.
5. Restart the appliance.
6. Press F2 immediately after you see the following message: "Press F2 to
enter the Function Select menu"
NOTE: If you use a version of Windows 2000 earlier than Service Pack 2,
the function keys do not work. You must press Esc-2.
If you wait too long and your operating system begins to load into memory,
allow the system to complete the load operation, and then shut down the
system and try again.
7. When the Function Select menu appears, press "5" to update the BIOS
Flash ROM.
8. When a message appears asking if you want to update the BIOS,
press "y".
9. When the message Flash System BIOS appears in the HyperTerminal window,
click Transfer, and then select Send File.
10. When the Send File dialog appears, click Browse and select the
downloaded BIOS file.
11. Select XModem on the Protocol menu, and then click Send.
The client system sends the file to the appliance and automatically
updates the BIOS. The appliance beeps four times, and then reboots
automatically.
To upgrade your system BIOS, perform the following steps:
1. Download the 715NA06 BIOS revision.
2. Run the downloaded executable file to extract the files to your hard
drive. The default extraction directory is c:\Dell\PV715NBIOS.
3. Using a null modem serial cable, connect the client system to the
appliance.
4. Turn on the client system and set up a Hyperterminal connection.
a. Click the Start button and point to Programs—>Accessories—
>Hyperterminal —>Hyperterminal.
b. Select 115200 for the Bits per second, 8 for Data Bits, None for
Parity, 1 for Stop Bits, and Xon\Xoff for Flow control.
5. Restart the appliance.
6. Press F2 immediately after you see the following message: "Press F2 to
enter the Function Select menu"
NOTE: If you use a version of Windows 2000 earlier than Service Pack 2,
the function keys do not work. You must press Esc-2.
If you wait too long and your operating system begins to load into memory,
allow the system to complete the load operation, and then shut down the
system and try again.
7. When the Function Select menu appears, press "5" to update the BIOS
Flash ROM.
8. When a message appears asking if you want to update the BIOS,
press "y".
9. When the message Flash System BIOS appears in the HyperTerminal window,
click Transfer, and then select Send File.
10. When the Send File dialog appears, click Browse and select the
downloaded BIOS file.
11. Select XModem on the Protocol menu, and then click Send.
The client system sends the file to the appliance and automatically
updates the BIOS. The appliance beeps four times, and then reboots
automatically.
Need help with BIOS issues?
Find a solution in Dell's BIOS troubleshooting and usage guide.Ajutor și tutoriale pentru drivere
Pentru mai multe descărcări, accesați Drivere și descărcări. Pentru ajutor privind utilizarea informațiilor de pe această pagină, accesați Tutoriale și ajutor pentru drivere.