Dell Device Managers for EMC Visual SAN, v.4.0, A01
INSTALATE AUTOMAT Acest fișier a fost instalat automat ca parte a unei actualizări recente. Dacă întâmpinați orice probleme, puteți descărca și reinstala manual.Conținutul acestei pagini este posibil să fi fost tradus automat. Pentru a furniza feedback, completați formularul din partea de jos a paginii.
Dell(TM) Device Managers is a plug-in for EMC(R) VisualSAN(R) 3.0.0, 3.0.0 SP1 and 4.0.0
This provides enhanced device support and integrates EMC VisualSAN management functionality with Dell hardware and software. Enhanced functionality for Dell devices includes the following features:
- Device Discovery for NAS and all Supported Dell PowerVault Tape devices
- Device Discovery for Cluster Node (For EMC VisualSAN 3.x only)
- Trap Handling and Reformatting
- Extended Device Properties and Dell Specific Attributes
- Enhanced System Status Reporting
This provides enhanced device support and integrates EMC VisualSAN management functionality with Dell hardware and software. Enhanced functionality for Dell devices includes the following features:
- Device Discovery for NAS and all Supported Dell PowerVault Tape devices
- Device Discovery for Cluster Node (For EMC VisualSAN 3.x only)
- Trap Handling and Reformatting
- Extended Device Properties and Dell Specific Attributes
- Enhanced System Status Reporting
Recomandate
Găsiți cea mai bună descărcare pentru sistemul dvs.
Introduceți detaliile produsului pentru a vedea cele mai recente informații despre driverele sistemului dvs.Asistență căutare
Introduceți eticheta de service Dell sau modelul
Doriți să vă căutați produsul? Introduceți un identificator de produs. Arătați-mi cum
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Conectați-vă la Windows ca administrator pentru a utiliza scanarea automată. Dacă sunteți deja conectat ca administrator și vedeți acest mesaj, reporniți sistemul. Sistemul dvs. este gestionat de către administratorul IT, iar caracteristicile pot fi limitate.
Găsiți mai multe actualizări. Utilizați SupportAssist pentru a găsi cele mai recente actualizări ale driverelor pentru dispozitivul dvs.
Fixes & Enhancements
Dell Device Managers Version 4.0 for EMC VisualSAN 3.0.0, 3.0.0 SP1 and 4.0.0
Citiți mai multeVersiune
4.0, A01
Data lansării:
19 mar. 2004
Tip de descărcare
Aplicații
Categorie
Software SAN
Importanță
OptionalDell Technologies recommends reviewing this update to determine if it applies to your system. The update contains changes that impact only certain configurations or provides new features that may or may not apply to your environment.
Formate disponibile
Format fișier ZipPack External
Nume fișier: R74063.EXE
Dimensiune fișier: 3.36 MB
Acesta este un fișier mare. În funcție de viteza conexiunii, descărcarea poate dura mai mult timp.
Descriere format:
This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.
Pentru a asigura integritatea descărcării, verificați valoarea cifrei de control.
MD5:
Not available
SHA1:
Not available
SHA-256:
Not available
Prin descărcare, acceptați termenii Dell Software License Agreement.
Sisteme de operare acceptate
Windows Server 2003
Windows 2000
Windows XP
Instrucțiuni de instalare
Custom Instructions for R74063.EXE:
Overview
Dell™ Device Managers installation uses a self-extracting exe from which you will run setup.exe. This document provides instructions for downloading the file and installing the program.
--------------------------------------------------------------------------------
Download
1. Go to www.dell.com/emc/visualsan and click the link Download the Dell Device Managers Plug-In for EMC VisualSAN now.
2. Click the R74063.exe link.
3. When prompted, click Download Now.
4. If the Export Compliance Disclaimer window appears, click Yes, I Accept this Agreement.
5. When the File Download window appears, click Save or Save this program to disk and click OK.
6. When the Save In window appears, select Desktop from the Save In drop-down menu to download the file to your desktop.
7. If the Download Complete window appears, click Close.
The file icon appears on your desktop.
--------------------------------------------------------------------------------
Installation
1. Double-click the R74063.exe file on the desktop.
2. When the Self-Extracting window appears and prompts you to extract the file to c:\dell\drivers\R74063, write down the name of the path to where the file is extracted so that you can find the setup.exe file later.
3. Click OK.
4. After completing the file extraction, if the Self-Extractor window is still open, close it.
5. Click the Start button and then click Run.
6. Enter c:\dell\drivers\R74063 in the Open text box and then click OK.
7. When the Welcome screen appears, click OK to display the license agreement screen.
8. Read the license agreement, using the scroll bar or key to navigate and read the rest of the agreement, and click Yes to accept the agreement.
A message warns to close VisualSAN windows before proceeding with the installation.
9. Close any open VisualSAN windows, and then click OK to continue the installation
A screen appears providing two options: Management Station and Managed Node. You can find more information about the selected option on the top of the screen by clicking the Management Station option or the Managed Node option.
You can also view the release notes or installation guide by clicking the appropriate buttons. You can choose Cancel at any time to exit the installation.
10. Continue the installation. See "Management Station" or "Managed Node" for more information.
Management Station
-------------------------
1. During setup, choose Management Station and click Next to install the program on the EMC® VisualSAN® management station.
During the dependency check, if all the dependencies are met, a green check appears next to the component in the component list. If a red mark appears next to the component, follow the instructions in the result window to obtain more information about the failure and take necessary action before continuing with installation.
If necessary, click Back and take the necessary steps to satisfy all the dependencies and restart the installation.
2. Click Next to continue.
The installation result window displays messages if the installation was successful or if it failed.
Managed Node
------------------
Managed Node software components are only required to be installed on a host in the following scenarios:
Managed Node is zoned to a PowerVault 120T tape autoloader or PowerVault 130T tape library.
Managed Node is a cluster node (For EMC VisualSAN 3.x support only; not required for EMC VisualSAN 4.0.0).
Managed Node is zoned to a PowerVault 650F disk processor enclosure (DPE).
Managed Node has a QLA2200 host bus adapter (HBA).
Read the description for each component below to determine if you need to install that component on the managed node.
Components:
Cluster SNMP Agent (For EMC VisualSAN 3.x support only. Not required for EMC VisualSAN 4.0.0)
The Dell OpenManage Clust
Overview
Dell™ Device Managers installation uses a self-extracting exe from which you will run setup.exe. This document provides instructions for downloading the file and installing the program.
--------------------------------------------------------------------------------
Download
1. Go to www.dell.com/emc/visualsan and click the link Download the Dell Device Managers Plug-In for EMC VisualSAN now.
2. Click the R74063.exe link.
3. When prompted, click Download Now.
4. If the Export Compliance Disclaimer window appears, click Yes, I Accept this Agreement.
5. When the File Download window appears, click Save or Save this program to disk and click OK.
6. When the Save In window appears, select Desktop from the Save In drop-down menu to download the file to your desktop.
7. If the Download Complete window appears, click Close.
The file icon appears on your desktop.
--------------------------------------------------------------------------------
Installation
1. Double-click the R74063.exe file on the desktop.
2. When the Self-Extracting window appears and prompts you to extract the file to c:\dell\drivers\R74063, write down the name of the path to where the file is extracted so that you can find the setup.exe file later.
3. Click OK.
4. After completing the file extraction, if the Self-Extractor window is still open, close it.
5. Click the Start button and then click Run.
6. Enter c:\dell\drivers\R74063 in the Open text box and then click OK.
7. When the Welcome screen appears, click OK to display the license agreement screen.
8. Read the license agreement, using the scroll bar or
A message warns to close VisualSAN windows before proceeding with the installation.
9. Close any open VisualSAN windows, and then click OK to continue the installation
A screen appears providing two options: Management Station and Managed Node. You can find more information about the selected option on the top of the screen by clicking the Management Station option or the Managed Node option.
You can also view the release notes or installation guide by clicking the appropriate buttons. You can choose Cancel at any time to exit the installation.
10. Continue the installation. See "Management Station" or "Managed Node" for more information.
Management Station
-------------------------
1. During setup, choose Management Station and click Next to install the program on the EMC® VisualSAN® management station.
During the dependency check, if all the dependencies are met, a green check appears next to the component in the component list. If a red mark appears next to the component, follow the instructions in the result window to obtain more information about the failure and take necessary action before continuing with installation.
If necessary, click Back and take the necessary steps to satisfy all the dependencies and restart the installation.
2. Click Next to continue.
The installation result window displays messages if the installation was successful or if it failed.
Managed Node
------------------
Managed Node software components are only required to be installed on a host in the following scenarios:
Managed Node is zoned to a PowerVault 120T tape autoloader or PowerVault 130T tape library.
Managed Node is a cluster node (For EMC VisualSAN 3.x support only; not required for EMC VisualSAN 4.0.0).
Managed Node is zoned to a PowerVault 650F disk processor enclosure (DPE).
Managed Node has a QLA2200 host bus adapter (HBA).
Read the description for each component below to determine if you need to install that component on the managed node.
Components:
Cluster SNMP Agent (For EMC VisualSAN 3.x support only. Not required for EMC VisualSAN 4.0.0)
The Dell OpenManage Clust
Ajutor și tutoriale pentru drivere
Pentru mai multe descărcări, accesați Drivere și descărcări. Pentru ajutor privind utilizarea informațiilor de pe această pagină, accesați Tutoriale și ajutor pentru drivere.