PERC H710 Adapter firmware release 21.0.1-0132.
INSTALATE AUTOMAT Acest fișier a fost instalat automat ca parte a unei actualizări recente. Dacă întâmpinați orice probleme, puteți descărca și reinstala manual.Conținutul acestei pagini este posibil să fi fost tradus automat. Pentru a furniza feedback, completați formularul din partea de jos a paginii.
PERC H710 Adapter firmware release 21.0.1-0132.
Recomandate
Găsiți cea mai bună descărcare pentru sistemul dvs.
Introduceți detaliile produsului pentru a vedea cele mai recente informații despre driverele sistemului dvs.Asistență căutare
Introduceți eticheta de service Dell sau modelul
Doriți să vă căutați produsul? Introduceți un identificator de produs. Arătați-mi cum
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Conectați-vă la Windows ca administrator pentru a utiliza scanarea automată. Dacă sunteți deja conectat ca administrator și vedeți acest mesaj, reporniți sistemul. Sistemul dvs. este gestionat de către administratorul IT, iar caracteristicile pot fi limitate.
Găsiți mai multe actualizări. Utilizați SupportAssist pentru a găsi cele mai recente actualizări ale driverelor pentru dispozitivul dvs.
Fixes & Enhancements
Initial Release.
Citiți mai multeVersiune
21.0.1-0132, A01
Data lansării:
06 mar. 2012
Tip de descărcare
Firmware
Categorie
Dispozitiv RAID SAS
Importanță
RecommendedDell Technologies recomandă aplicarea acestei actualizări în următorul ciclu de actualizare programat. Actualizarea conține modificări pentru menținerea stării generale de funcționare a sistemului. Acesta asigură faptul că software-ul sistemului rămâne actual și compatibil cu alte module de sistem (firmware, BIOS, drivere și software) și poate include alte caracteristici noi.
Formate disponibile View Important Information
Format fișier Actualizați pachetul pentru MS Windows pe 32 de biți
Nume fișier: SAS-RAID_Firmware_V4M4X_WN32_21.0.1-0132_A01.EXE
Dimensiune fișier: 8.06 MB
Acesta este un fișier mare. În funcție de viteza conexiunii, descărcarea poate dura mai mult timp.
Descriere format:
Dell Update Packages (DUP) in Microsoft Windows 32bit format have been designed to run on Microsoft Windows 64bit Operating Systems. Dell Update Packages (DUP) in Microsoft Windows 64bit format will only run on Microsoft Windows 64bit Operating Systems. When selecting a device driver update be sure to select the one that is appropriate for your operating system.
Pentru a asigura integritatea descărcării, verificați valoarea cifrei de control.
MD5:
c43cc2f58f3c477a16ec8d22f53e067d
SHA1:
f346594f00b7419e559ce2eb9ddec9cbd501387a
SHA-256:
Not available
Format fișier A GnuPG file which contains a cryptographic signature
Nume fișier: SAS-RAID_Firmware_V4M4X_LN32_21.0.1-0132_A01.BIN.sign
Dimensiune fișier: 194 Bytes
Acesta este un fișier mare. În funcție de viteza conexiunii, descărcarea poate dura mai mult timp.
Descriere format:
The GnuPG signature for Red Hat Linux Update Package can be used to authenticate Dell's identity in the correlated Red Hat Linux Update Package.
Pentru a asigura integritatea descărcării, verificați valoarea cifrei de control.
MD5:
02cc464af7d62a4aa7448c21987c50ef
SHA1:
7e0b1fb9b689c24c5c7a0a2c1198ef3357df9894
SHA-256:
Not available
Format fișier ZipPack External
Nume fișier: SAS_RAID_H710A_21.0.1-0132_A01_ZPE.exe
Dimensiune fișier: 3.28 MB
Acesta este un fișier mare. În funcție de viteza conexiunii, descărcarea poate dura mai mult timp.
Descriere format:
This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.
Pentru a asigura integritatea descărcării, verificați valoarea cifrei de control.
MD5:
985a0359a5c0ed2b9031f32f9151c8d1
SHA1:
b598190d308181f983f3cb6a5c4820d5c8678df6
SHA-256:
Not available
Format fișier External release notes
Nume fișier: SAS_RAID_Firmware_H710_Adapter_RELNOTES_21.0.1-132_A01.txt
Dimensiune fișier: 3.39 KB
Acesta este un fișier mare. În funcție de viteza conexiunii, descărcarea poate dura mai mult timp.
Descriere format:
This file format contains plain text which can be viewed with a standard text editor.
Pentru a asigura integritatea descărcării, verificați valoarea cifrei de control.
MD5:
c50d5406067b71a20e96e6bfb6e1d3eb
SHA1:
8befeddddaf2d20dc69d20b5e853909f08279895
SHA-256:
Not available
Format fișier Update Package for Red Hat Linux
Nume fișier: SAS-RAID_Firmware_V4M4X_LN32_21.0.1-0132_A01.BIN
Dimensiune fișier: 6.14 MB
Acesta este un fișier mare. În funcție de viteza conexiunii, descărcarea poate dura mai mult timp.
Descriere format:
Dell Update Packages for Linux can be used as stand-alone applications that ensure that specific validation criteria are met, then apply an update.
Note: Update Packages for Linux are open source. See the Dell Update Packages for Linux Readme for details.
Note: Update Packages for Linux are open source. See the Dell Update Packages for Linux Readme for details.
Pentru a asigura integritatea descărcării, verificați valoarea cifrei de control.
MD5:
3b3d0598462d3070190a7fe0653126c0
SHA1:
b9a4e9a4896b63c1318478b9d8ecbcdda0eeaaae
SHA-256:
Not available
Prin descărcare, acceptați termenii Dell Software License Agreement.
Informații importante
The firmware upgrade may fail if any of the RAID controllers in the system are performing an I/O background task (that is, consistency check, background initialization, rebuild, or reconstruction). Allow the background task to complete before attempting to upgrade the firmware. Patrol Read tasks will not affect a firmware upgrade.
* Linux systems running one or more applications that interact with SCSI devices in certain ways are known to cause a kernel panic situation. Therefore, it is recommended that you stop Server Administrator and its Storage Management Service before running storage controller firmware update packages.
To stop the Dell OpenManage(TM) Server Administrator service,
run "omconfig system webserver action=stop"
To start the Server Administrator service,
run "omconfig system webserver action=start"
To stop the Server Administrator Storage Management Service,
run "/etc/init.d/dataeng stop"
To start the Server Administrator Storage Management Service,
run "/etc/init.d/dataeng start"
* Linux systems running one or more applications that interact with SCSI devices in certain ways are known to cause a kernel panic situation. Therefore, it is recommended that you stop Server Administrator and its Storage Management Service before running storage controller firmware update packages.
To stop the Dell OpenManage(TM) Server Administrator service,
run "omconfig system webserver action=stop"
To start the Server Administrator service,
run "omconfig system webserver action=start"
To stop the Server Administrator Storage Management Service,
run "/etc/init.d/dataeng stop"
To start the Server Administrator Storage Management Service,
run "/etc/init.d/dataeng start"
Sisteme de operare acceptate
Nu se aplică
Se aplică pentru
PERC H710 Adapter
Instrucțiuni de instalare
ZipPack:
Download the ZipPack from support.dell.com and extract its contents to a
Dell Real Mode Kernel (DRMK) bootable USB key.
Installation:
1. Reboot system to the DRMK bootable media.
2. Execute "UPDATE.BAT" to perform flash.
3. After flash is complete, remove bootable media.
4. Reboot system for changes to take effect.
Dell Update Package (Windows):
------------------------------
Download the executable from support.dell.com. This package can be executed
from the operating system.
Installation
1. Browse to the location where you downloaded the file and double-click the
new file.
2. Clik the "Install".
3. Follow the remaining prompts to perform the update.
Dell Update Package (RHEL/SuSe):
--------------------------------
Download the executable from support.dell.com. This package can be executed
from the operating system.
Installation
1. Browse to the location where you downloaded the file and run the update
by executing "./FRMW_LX_RXXXXXX.BIN" from the shell.
2. Follow the remaining prompts to perform the update.
GnuPG Signature of Dell Update Package Instructions for FRMW_LX_RXXXXXX.BIN:
----------------------------------------------------------------------------
Download
1. Click the "Download Now" link to download the file.
2. When the "File Download" window appears, click "Save" to save the file to
your hard drive.
Installation
1. Import the Dell public key. (You only need to do this once on your system.)
2. Verify the Dell Update Package by using its signature file,
FRMW_LX_RXXXXXX.BIN.
3.0 Important Information
=========================
The firmware upgrade may fail if any of the RAID controllers in the system are performing an I/O background task (that is, consistency check, background initialization, rebuild, or reconstruction). Allow the background task to complete before attempting to upgrade the firmware. Patrol Read tasks will not affect a firmware upgrade.
* Linux systems running one or more applications that interact with SCSI devices in certain ways are known to cause a kernel panic situation. Therefore, it is recommended that you stop Server Administrator and its Storage Management Service before running storage controller firmware update packages.
To stop the Dell OpenManage(TM) Server Administrator service,
run "omconfig system webserver action=stop"
To start the Server Administrator service,
run "omconfig system webserver action=start"
To stop the Server Administrator Storage Management Service,
run "/etc/init.d/dataeng stop"
To start the Server Administrator Storage Management Service,
run "/etc/init.d/dataeng start"
Download the ZipPack from support.dell.com and extract its contents to a
Dell Real Mode Kernel (DRMK) bootable USB key.
Installation:
1. Reboot system to the DRMK bootable media.
2. Execute "UPDATE.BAT" to perform flash.
3. After flash is complete, remove bootable media.
4. Reboot system for changes to take effect.
Dell Update Package (Windows):
------------------------------
Download the executable from support.dell.com. This package can be executed
from the operating system.
Installation
1. Browse to the location where you downloaded the file and double-click the
new file.
2. Clik the "Install".
3. Follow the remaining prompts to perform the update.
Dell Update Package (RHEL/SuSe):
--------------------------------
Download the executable from support.dell.com. This package can be executed
from the operating system.
Installation
1. Browse to the location where you downloaded the file and run the update
by executing "./FRMW_LX_RXXXXXX.BIN" from the shell.
2. Follow the remaining prompts to perform the update.
GnuPG Signature of Dell Update Package Instructions for FRMW_LX_RXXXXXX.BIN:
----------------------------------------------------------------------------
Download
1. Click the "Download Now" link to download the file.
2. When the "File Download" window appears, click "Save" to save the file to
your hard drive.
Installation
1. Import the Dell public key. (You only need to do this once on your system.)
2. Verify the Dell Update Package by using its signature file,
FRMW_LX_RXXXXXX.BIN.
3.0 Important Information
=========================
The firmware upgrade may fail if any of the RAID controllers in the system are performing an I/O background task (that is, consistency check, background initialization, rebuild, or reconstruction). Allow the background task to complete before attempting to upgrade the firmware. Patrol Read tasks will not affect a firmware upgrade.
* Linux systems running one or more applications that interact with SCSI devices in certain ways are known to cause a kernel panic situation. Therefore, it is recommended that you stop Server Administrator and its Storage Management Service before running storage controller firmware update packages.
To stop the Dell OpenManage(TM) Server Administrator service,
run "omconfig system webserver action=stop"
To start the Server Administrator service,
run "omconfig system webserver action=start"
To stop the Server Administrator Storage Management Service,
run "/etc/init.d/dataeng stop"
To start the Server Administrator Storage Management Service,
run "/etc/init.d/dataeng start"
Ajutor și tutoriale pentru drivere
Pentru mai multe descărcări, accesați Drivere și descărcări. Pentru ajutor privind utilizarea informațiilor de pe această pagină, accesați Tutoriale și ajutor pentru drivere.