Adaptec 39160 SCSI - Family Manager Set, v.6.3.6300.100, A00
INSTALATE AUTOMAT Acest fișier a fost instalat automat ca parte a unei actualizări recente. Dacă întâmpinați orice probleme, puteți descărca și reinstala manual.Conținutul acestei pagini este posibil să fi fost tradus automat. Pentru a furniza feedback, completați formularul din partea de jos a paginii.
Adaptec 39160/7892/7899 SCSI Controller Driver Set; Windows 2003 Server Family
Recomandate
Găsiți cea mai bună descărcare pentru sistemul dvs.
Introduceți detaliile produsului pentru a vedea cele mai recente informații despre driverele sistemului dvs.Asistență căutare
Introduceți eticheta de service Dell sau modelul
Doriți să vă căutați produsul? Introduceți un identificator de produs. Arătați-mi cum
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Conectați-vă la Windows ca administrator pentru a utiliza scanarea automată. Dacă sunteți deja conectat ca administrator și vedeți acest mesaj, reporniți sistemul. Sistemul dvs. este gestionat de către administratorul IT, iar caracteristicile pot fi limitate.
Găsiți mai multe actualizări. Utilizați SupportAssist pentru a găsi cele mai recente actualizări ale driverelor pentru dispozitivul dvs.
Fixes & Enhancements
This Windows2003 driver is an upgrade from the native driver - as of this release Dell A00 = Adaptec FMS 4.0 SP5. It is also identical to the Dell A11/Adaptec FMS 4.0 SP5 W2K3 driver, which was delivered packaged together with a W2K driver.
- Fixed issue: disabled VirtualDataAccess
Citiți mai multe- Fixed issue: disabled VirtualDataAccess
Versiune
6.3.6300.100, A00
Data lansării:
06 apr. 2004
Tip de descărcare
Driver
Categorie
Dispozitive SCSI non-RAID
Importanță
RecommendedDell Technologies recomandă aplicarea acestei actualizări în următorul ciclu de actualizare programat. Actualizarea conține modificări pentru menținerea stării generale de funcționare a sistemului. Acesta asigură faptul că software-ul sistemului rămâne actual și compatibil cu alte module de sistem (firmware, BIOS, drivere și software) și poate include alte caracteristici noi.
Formate disponibile View Important Information
Format fișier Extrage fișiere direct pe discul local
Nume fișier: W2003A00.exe
Dimensiune fișier: 82.5 KB
Acesta este un fișier mare. În funcție de viteza conexiunii, descărcarea poate dura mai mult timp.
Descriere format:
This file format consists of an archive of files that may be decompressed to a directory on the hard drive. The installation can then be done from that directory.
Pentru a asigura integritatea descărcării, verificați valoarea cifrei de control.
MD5:
Not available
SHA1:
Not available
SHA-256:
Not available
Prin descărcare, acceptați termenii Dell Software License Agreement.
Informații importante
This driver is part of the Adaptec FMS 4.0 SP5 release.
Sisteme de operare acceptate
Windows Server 2003
Se aplică pentru
39160 SCSI - Family Manager Set
39160 SCSI Controller - Firmware
Instrucțiuni de instalare
Custom Instructions for W2003A00.exe:
Download
1. Click the "Download Now" link to download the file.
2. If the Export Compliance Disclaimer window appears, click the "I agree" link to accept the agreement.
3. When the File Download window appears, click "Save" to save the file to your hard drive.
Extract Files
1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package.
2. Specify the location to unzip the files.
3. Click on the unzip button to extract files.
Installation
Updating the driver on an Existing Windows 2003 Server
NOTE: You must be logged on as Administrator to perform these steps:
1. Copy files extracted above to formatted floppy disk
2. From the desktop, right-click the My Computer icon.
3. Left-click Manage.
4. Click Device Manager.
5. Double-click SCSI and RAID Controller (A List of all currently installed SCSI drivers appears).
6. Double-click the appropriate SCSI controller (such as 39160Controller) - in the case of a dual channel controller, there will be two devices listed (one for each channel). The driver will have to be updated separately for each channel.
7. Select the Driver tab.
8. Select Update Driver. (The Update Device Driver Wizard appears).
9. Click Next.
10. Click 'Display a list of known drivers for this device so I can choose a specific driver'
11. Click Next. (The Upgrade Device Driver Wizard appears).
12. Click 'Have Disk' button. (The 'Install from Disk' dialog appears).
13. Insert the driver diskette created above. (Skip this step if installing driver from location on hard drive)
14. Click 'Browse' button (Locate File dialog appears).
15. Use pull-down box to find floppy drive or location on hard drive where you previously extracted files.
16. Double-click on WINNET folder (ADPU160M.INF should appear in 'File Name' box - if not, select it).
17. Click 'Open' button ('Install From Disk' dialog reappears with correct path displayed).
18. Click 'OK' (Upgrade Device Driver Wizard reappears).
19. Choose appropriate device from list (7892, 7899 or 39160)
20. Click 'Next'
21. Click 'Next' again to confirm choice and upgrade driver
22. Close Wizard by clicking Finish
23. Close Properties Dialog for device.
24. Do not reboot system yet.
25. Repeat steps 5-22 for second channel after Device Manager refreshes.
26. Reboot System to complete upgrade.
Download
1. Click the "Download Now" link to download the file.
2. If the Export Compliance Disclaimer window appears, click the "I agree" link to accept the agreement.
3. When the File Download window appears, click "Save" to save the file to your hard drive.
Extract Files
1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package.
2. Specify the location to unzip the files.
3. Click on the unzip button to extract files.
Installation
Updating the driver on an Existing Windows 2003 Server
NOTE: You must be logged on as Administrator to perform these steps:
1. Copy files extracted above to formatted floppy disk
2. From the desktop, right-click the My Computer icon.
3. Left-click Manage.
4. Click Device Manager.
5. Double-click SCSI and RAID Controller (A List of all currently installed SCSI drivers appears).
6. Double-click the appropriate SCSI controller (such as 39160Controller) - in the case of a dual channel controller, there will be two devices listed (one for each channel). The driver will have to be updated separately for each channel.
7. Select the Driver tab.
8. Select Update Driver. (The Update Device Driver Wizard appears).
9. Click Next.
10. Click 'Display a list of known drivers for this device so I can choose a specific driver'
11. Click Next. (The Upgrade Device Driver Wizard appears).
12. Click 'Have Disk' button. (The 'Install from Disk' dialog appears).
13. Insert the driver diskette created above. (Skip this step if installing driver from location on hard drive)
14. Click 'Browse' button (Locate File dialog appears).
15. Use pull-down box to find floppy drive or location on hard drive where you previously extracted files.
16. Double-click on WINNET folder (ADPU160M.INF should appear in 'File Name' box - if not, select it).
17. Click 'Open' button ('Install From Disk' dialog reappears with correct path displayed).
18. Click 'OK' (Upgrade Device Driver Wizard reappears).
19. Choose appropriate device from list (7892, 7899 or 39160)
20. Click 'Next'
21. Click 'Next' again to confirm choice and upgrade driver
22. Close Wizard by clicking Finish
23. Close Properties Dialog for device.
24. Do not reboot system yet.
25. Repeat steps 5-22 for second channel after Device Manager refreshes.
26. Reboot System to complete upgrade.
Ajutor și tutoriale pentru drivere
Pentru mai multe descărcări, accesați Drivere și descărcări. Pentru ajutor privind utilizarea informațiilor de pe această pagină, accesați Tutoriale și ajutor pentru drivere.