Dell BMC Firmware Update
Este necesară repornirea INSTALATE AUTOMAT Acest fișier a fost instalat automat ca parte a unei actualizări recente. Dacă întâmpinați orice probleme, puteți descărca și reinstala manual.Conținutul acestei pagini este posibil să fi fost tradus automat. Pentru a furniza feedback, completați formularul din partea de jos a paginii.
This package provides the driver for Dell BMC Firmware Update and is supported on Enterprise Servers and Powervault models that are running the following Operating System: NA.
Recomandate
Găsiți cea mai bună descărcare pentru sistemul dvs.
Introduceți detaliile produsului pentru a vedea cele mai recente informații despre driverele sistemului dvs.Asistență căutare
Introduceți eticheta de service Dell sau modelul
Doriți să vă căutați produsul? Introduceți un identificator de produs. Arătați-mi cum
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Conectați-vă la Windows ca administrator pentru a utiliza scanarea automată. Dacă sunteți deja conectat ca administrator și vedeți acest mesaj, reporniți sistemul. Sistemul dvs. este gestionat de către administratorul IT, iar caracteristicile pot fi limitate.
Găsiți mai multe actualizări. Utilizați SupportAssist pentru a găsi cele mai recente actualizări ale driverelor pentru dispozitivul dvs.
Fixes & Enhancements
Fixes
- Fixed DRAC5 POST issue.
Enhancements
- N/A
Citiți mai multe- Fixed DRAC5 POST issue.
Enhancements
- N/A
Versiune
2.37, A13
Data lansării:
23 dec. 2013
Tip de descărcare
Firmware
Categorie
Administrarea integrată a serverelor
Importanță
RecommendedDell Technologies recomandă aplicarea acestei actualizări în următorul ciclu de actualizare programat. Actualizarea conține modificări pentru menținerea stării generale de funcționare a sistemului. Acesta asigură faptul că software-ul sistemului rămâne actual și compatibil cu alte module de sistem (firmware, BIOS, drivere și software) și poate include alte caracteristici noi.
Formate disponibile View Important Information
Format fișier Actualizați pachetul pentru MS Windows pe 32 de biți
Nume fișier: BMC_FRMW_WIN_R202152.EXE
Dimensiune fișier: 4.57 MB
Acesta este un fișier mare. În funcție de viteza conexiunii, descărcarea poate dura mai mult timp.
Descriere format:
Dell Update Packages (DUP) in Microsoft Windows 32bit format have been designed to run on Microsoft Windows 64bit Operating Systems. Dell Update Packages (DUP) in Microsoft Windows 64bit format will only run on Microsoft Windows 64bit Operating Systems. When selecting a device driver update be sure to select the one that is appropriate for your operating system.
Pentru a asigura integritatea descărcării, verificați valoarea cifrei de control.
MD5:
4B2DDE1E537556AF2443A8B3952BD52F
SHA1:
Not available
SHA-256:
Not available
Format fișier A GnuPG file which contains a cryptographic signature
Nume fișier: BMC_FRMW_LX_R202152.BIN.sign
Dimensiune fișier: 194 Bytes
Acesta este un fișier mare. În funcție de viteza conexiunii, descărcarea poate dura mai mult timp.
Descriere format:
The GnuPG signature for Red Hat Linux Update Package can be used to authenticate Dell's identity in the correlated Red Hat Linux Update Package.
Pentru a asigura integritatea descărcării, verificați valoarea cifrei de control.
MD5:
9069E7EA753DDFFD1E3E774DAFA21509
SHA1:
Not available
SHA-256:
Not available
Format fișier Extrage fișiere direct pe discul local
Nume fișier: PE2950Bmc_A13.exe
Dimensiune fișier: 329.5 KB
Acesta este un fișier mare. În funcție de viteza conexiunii, descărcarea poate dura mai mult timp.
Descriere format:
This file format consists of an archive of files that may be decompressed to a directory on the hard drive. The installation can then be done from that directory.
Pentru a asigura integritatea descărcării, verificați valoarea cifrei de control.
MD5:
cb34653023c380409a3b87b0807d842e
SHA1:
Not available
SHA-256:
Not available
Format fișier Update Package for Red Hat Linux
Nume fișier: BMC_FRMW_LX_R202152.BIN
Dimensiune fișier: 3.7 MB
Acesta este un fișier mare. În funcție de viteza conexiunii, descărcarea poate dura mai mult timp.
Descriere format:
Dell Update Packages for Linux can be used as stand-alone applications that ensure that specific validation criteria are met, then apply an update.
Note: Update Packages for Linux are open source. See the Dell Update Packages for Linux Readme for details.
Note: Update Packages for Linux are open source. See the Dell Update Packages for Linux Readme for details.
Pentru a asigura integritatea descărcării, verificați valoarea cifrei de control.
MD5:
7B386385F054CD8B5127878B37AC56F8
SHA1:
Not available
SHA-256:
Not available
Prin descărcare, acceptați termenii Dell Software License Agreement.
Informații importante
Important Information for Update Packages for Microsoft Windows
1. Do not run other applications while executing Dell Update Packages.
2. When upgrading the BMC/ESM firmware or the BP firmware on PowerEdge x8xx or x9xx servers with the Windows Server 2003 R2 IPMI driver installed, the update may take up to 20 minutes to complete.
3. To speed up the time it takes to perform such updates on PowerEdge x8xx or x9xx servers, you can uninstall the R2 IPMI driver before performing the firmware upgrade operation using the command ""rundll32 ipmisetp.dll, RemoveTheDevice"" from a command prompt. After the firmware flash is complete, you can install the driver again by executing the command ""rundll32 ipmisetp.dll, AddTheDevice"". On PowerEdge x9xx servers, the driver can be re-installed by performing a ""Scan for hardware changes"" in the Device Manager.
4. When upgrading the BMC/ESM firmware on PowerEdge x8xx or x9xx servers with the Windows Server 2003 R2 IPMI driver installed, multiple time-out warning messages from source ""IPMIDRV"" with Event ID 1004 are logged in the System Log in the Event Viewer console.
5. These messages can be safely ignored. However, to prevent the messages from being logged, you can uninstall the R2 IPMI driver before performing the firmware upgrade operation using the command ""rundll32 ipmisetp.dll, RemoveTheDevice"" from a command prompt. After the firmware flash is complete, you can install the driver again by executing the command ""rundll32 ipmisetp.dll, AddTheDevice"". On PowerEdge x9xx servers, the driver can be re-installed by performing a ""Scan for hardware changes"" in the Device Manager.
6. For more information on this issue, including information on the cause of this issue, see the Microsoft KB article number 912596.
Important Information for Update Packages for Linux
1. Do not run other applications while executing Dell Update Packages.
2. If the following error occurs, ""Error while loading shared libraries: libstdc++.so.5: cannot open shared object file: No such file or directory"", you must install the compatibility libraries from ""www.redhat.com"" or from the Red Hat CD. To install the compatibility libraries, use the following command: ""RPM -ih compat-libstdc++-33-3.2.3-47.3.i386.rpm""
3. Dell Update Packages for BMC, BP, ESM, and DRAC5 require the OpenIPMI driver to be loaded on your system. The current drivers can be downloaded from the Dell Support website at ""support.dell.com"".
1. Do not run other applications while executing Dell Update Packages.
2. When upgrading the BMC/ESM firmware or the BP firmware on PowerEdge x8xx or x9xx servers with the Windows Server 2003 R2 IPMI driver installed, the update may take up to 20 minutes to complete.
3. To speed up the time it takes to perform such updates on PowerEdge x8xx or x9xx servers, you can uninstall the R2 IPMI driver before performing the firmware upgrade operation using the command ""rundll32 ipmisetp.dll, RemoveTheDevice"" from a command prompt. After the firmware flash is complete, you can install the driver again by executing the command ""rundll32 ipmisetp.dll, AddTheDevice"". On PowerEdge x9xx servers, the driver can be re-installed by performing a ""Scan for hardware changes"" in the Device Manager.
4. When upgrading the BMC/ESM firmware on PowerEdge x8xx or x9xx servers with the Windows Server 2003 R2 IPMI driver installed, multiple time-out warning messages from source ""IPMIDRV"" with Event ID 1004 are logged in the System Log in the Event Viewer console.
5. These messages can be safely ignored. However, to prevent the messages from being logged, you can uninstall the R2 IPMI driver before performing the firmware upgrade operation using the command ""rundll32 ipmisetp.dll, RemoveTheDevice"" from a command prompt. After the firmware flash is complete, you can install the driver again by executing the command ""rundll32 ipmisetp.dll, AddTheDevice"". On PowerEdge x9xx servers, the driver can be re-installed by performing a ""Scan for hardware changes"" in the Device Manager.
6. For more information on this issue, including information on the cause of this issue, see the Microsoft KB article number 912596.
Important Information for Update Packages for Linux
1. Do not run other applications while executing Dell Update Packages.
2. If the following error occurs, ""Error while loading shared libraries: libstdc++.so.5: cannot open shared object file: No such file or directory"", you must install the compatibility libraries from ""www.redhat.com"" or from the Red Hat CD. To install the compatibility libraries, use the following command: ""RPM -ih compat-libstdc++-33-3.2.3-47.3.i386.rpm""
3. Dell Update Packages for BMC, BP, ESM, and DRAC5 require the OpenIPMI driver to be loaded on your system. The current drivers can be downloaded from the Dell Support website at ""support.dell.com"".
Sisteme de operare acceptate
Nu se aplică
Se aplică pentru
BMC Firmware
Instrucțiuni de instalare
Dell Update Package Instructions
Download
1. Click Download File to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.
Hard Drive Installation (File Extractions Only) Instructions
Download
1.Click Download File, to download the file.
2. When the File Download window appears, click Save or Save this program to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Follow the remaining prompts to perform the update.
Download
1. Click Download File to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.
Hard Drive Installation (File Extractions Only) Instructions
Download
1.Click Download File, to download the file.
2. When the File Download window appears, click Save or Save this program to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Follow the remaining prompts to perform the update.
Ajutor și tutoriale pentru drivere
Pentru mai multe descărcări, accesați Drivere și descărcări. Pentru ajutor privind utilizarea informațiilor de pe această pagină, accesați Tutoriale și ajutor pentru drivere.