Dell PERC 5/i Adapter, v.5.2.2-0072, A06
INSTALATE AUTOMAT Acest fișier a fost instalat automat ca parte a unei actualizări recente. Dacă întâmpinați orice probleme, puteți descărca și reinstala manual.Conținutul acestei pagini este posibil să fi fost tradus automat. Pentru a furniza feedback, completați formularul din partea de jos a paginii.
Dell Precision PERC 5/I Adapter Firmware release
Package Version: 5.2.2-0072
Package Version: 5.2.2-0072
Recomandate
Găsiți cea mai bună descărcare pentru sistemul dvs.
Introduceți detaliile produsului pentru a vedea cele mai recente informații despre driverele sistemului dvs.Asistență căutare
Introduceți eticheta de service Dell sau modelul
Doriți să vă căutați produsul? Introduceți un identificator de produs. Arătați-mi cum
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Conectați-vă la Windows ca administrator pentru a utiliza scanarea automată. Dacă sunteți deja conectat ca administrator și vedeți acest mesaj, reporniți sistemul. Sistemul dvs. este gestionat de către administratorul IT, iar caracteristicile pot fi limitate.
Găsiți mai multe actualizări. Utilizați SupportAssist pentru a găsi cele mai recente actualizări ale driverelor pentru dispozitivul dvs.
Fixes & Enhancements
Package Version - 5.2.2-0072
Firmware Version - 1.03.50-0461
BIOS Version - MT28-9
Ctrl-R Version - 1.04-019A
MPT Version - 00.10.62.00-IT
Please see release notes for detailed list of fixes/enhancements.
Citiți mai multeFirmware Version - 1.03.50-0461
BIOS Version - MT28-9
Ctrl-R Version - 1.04-019A
MPT Version - 00.10.62.00-IT
Please see release notes for detailed list of fixes/enhancements.
Versiune
5.2.2-0072, A06
Data lansării:
22 oct. 2008
Tip de descărcare
Firmware
Categorie
Dispozitiv RAID SAS
Importanță
RecommendedDell Technologies recomandă aplicarea acestei actualizări în următorul ciclu de actualizare programat. Actualizarea conține modificări pentru menținerea stării generale de funcționare a sistemului. Acesta asigură faptul că software-ul sistemului rămâne actual și compatibil cu alte module de sistem (firmware, BIOS, drivere și software) și poate include alte caracteristici noi.
Formate disponibile View Important Information
Format fișier ZipPack External
Nume fișier: DELL_PERC-5-I-ADAPTER_A06_R189433.EXE
Dimensiune fișier: 1.35 MB
Acesta este un fișier mare. În funcție de viteza conexiunii, descărcarea poate dura mai mult timp.
Descriere format:
This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.
Pentru a asigura integritatea descărcării, verificați valoarea cifrei de control.
MD5:
Not available
SHA1:
Not available
SHA-256:
Not available
Format fișier One or more self extracting disk images inside of a self extracting zip
Nume fișier: BR189433.exe
Dimensiune fișier: 1.53 MB
Acesta este un fișier mare. În funcție de viteza conexiunii, descărcarea poate dura mai mult timp.
Descriere format:
This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, then double-click it to unzip the set of files. Follow the instructions to complete the installation.
Pentru a asigura integritatea descărcării, verificați valoarea cifrei de control.
MD5:
22859dbfb5e2165ffd23fe9188c404ac
SHA1:
Not available
SHA-256:
Not available
Format fișier External release notes
Nume fișier: R189433.txt
Dimensiune fișier: 13.54 KB
Acesta este un fișier mare. În funcție de viteza conexiunii, descărcarea poate dura mai mult timp.
Descriere format:
This file format contains plain text which can be viewed with a standard text editor.
Pentru a asigura integritatea descărcării, verificați valoarea cifrei de control.
MD5:
6db0e46508e97ee65ea117a7f85cd0d1
SHA1:
Not available
SHA-256:
Not available
Prin descărcare, acceptați termenii Dell Software License Agreement.
Informații importante
1. When viewing SATA physical disk properties from Ctrl-R or other management
applications, the Vendor Identification will be translated as "ATA".
2. If all physical disks making up a virtual disk are removed from the system or
enclosure, the RAID controller will delete the virtual disk. If the disks are
later re-inserted, they will be marked foreign and can be imported using a
management application.
3. If the cable connecting a PERC 5/E to an enclosure is removed, the RAID
controller will immediately delete all virtual disks on that enclosure. To
recover, power down the server and ensure all cables in the configuration are
securely connected. When the server is powered on, the RAID controller will
detect the disks as foreign and the configuration can be imported with a
management application.
4. Physical disks determined to contain a foreign configuration are not
available for configuration as a new dedicated or global hotspare, or as a
member of a new virtual disk. The foreign configuration must be imported or
cleared from the physical disk before it may be used as a hotspare or member
of a virtual disk. Physical disks with a foreign configuration will not appear
on the Create New VD screen in Ctrl-R.
5. Prior to performing a virtual disk migration, the source system must be
powered off before removal of the physical disks to preserve the correct
virtual disk state. This is not required for the target system and the
physical disks may be inserted while the system is powered on or off.
6. This version of firmware will not ensure complete compatibility with an
older version of the management application, OpenManage 5.0 or 5.1.
OpenManage 5.2 or greater is recommended.
7. It is recommended that the customer upgrade the management application
and device driver to the latest version available from Dell at the time of
installation of this firmware.
8. The firmware restricts the importing of virtual disks that are undergoing
RAID level migration or Capacity Expansion. Do not interrupt virtual disks
that are performing either of these operations because it will disable the
ability to import the virtual disk and the data will be unavailable. Dell
recommends that the user perform a data backup before starting these operations.
9. Foreign dedicated hot spares are now imported as global hot spares.
10. Default Physical disk cache settings for hard drives are ON for SATA drives
and OFF for SAS drives.
11. A EMM change or a drive migration is not a supported action during a
Capacity Expansion or Raid Level Migration. This may cause the VDs to go offline.
Dell recommends the user to take a data backup before starting these operations.
12. A Rebuild operation cannot be stopped/interrupted from the Ctrl+R configuration utility
but can be done from the Dell Open Manage Storage Management Software.
applications, the Vendor Identification will be translated as "ATA".
2. If all physical disks making up a virtual disk are removed from the system or
enclosure, the RAID controller will delete the virtual disk. If the disks are
later re-inserted, they will be marked foreign and can be imported using a
management application.
3. If the cable connecting a PERC 5/E to an enclosure is removed, the RAID
controller will immediately delete all virtual disks on that enclosure. To
recover, power down the server and ensure all cables in the configuration are
securely connected. When the server is powered on, the RAID controller will
detect the disks as foreign and the configuration can be imported with a
management application.
4. Physical disks determined to contain a foreign configuration are not
available for configuration as a new dedicated or global hotspare, or as a
member of a new virtual disk. The foreign configuration must be imported or
cleared from the physical disk before it may be used as a hotspare or member
of a virtual disk. Physical disks with a foreign configuration will not appear
on the Create New VD screen in Ctrl-R.
5. Prior to performing a virtual disk migration, the source system must be
powered off before removal of the physical disks to preserve the correct
virtual disk state. This is not required for the target system and the
physical disks may be inserted while the system is powered on or off.
6. This version of firmware will not ensure complete compatibility with an
older version of the management application, OpenManage 5.0 or 5.1.
OpenManage 5.2 or greater is recommended.
7. It is recommended that the customer upgrade the management application
and device driver to the latest version available from Dell at the time of
installation of this firmware.
8. The firmware restricts the importing of virtual disks that are undergoing
RAID level migration or Capacity Expansion. Do not interrupt virtual disks
that are performing either of these operations because it will disable the
ability to import the virtual disk and the data will be unavailable. Dell
recommends that the user perform a data backup before starting these operations.
9. Foreign dedicated hot spares are now imported as global hot spares.
10. Default Physical disk cache settings for hard drives are ON for SATA drives
and OFF for SAS drives.
11. A EMM change or a drive migration is not a supported action during a
Capacity Expansion or Raid Level Migration. This may cause the VDs to go offline.
Dell recommends the user to take a data backup before starting these operations.
12. A Rebuild operation cannot be stopped/interrupted from the Ctrl+R configuration utility
but can be done from the Dell Open Manage Storage Management Software.
Instrucțiuni de instalare
Instructions for BR189433.exe
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Diskette Creation
1. Browse to the location where you downloaded the file and double-click the new file to create the diskette set.
2. Insert a blank diskette then click Continue.
3. When prompted, repeat step 2 until you reach the end of the diskette set. Label each diskette with a disk number starting from 1.
4. After all the files have been copied to the last diskette, click Finish.
Hard Drive Floppy Disk Creation
1. Get 2 blank, formatted floppy disks.
2. Double-click the new icon (it looks like a floppy diskette) on
the desktop. The Self-Extractor window appears.
3. Click the 'Continue' button on the self-extractor window after inserting
one of the formatted floppies.
4. The utility prompts the user to insert the second floppy diskette after
it completes writing on the first floppy.
5. Remove the first floppy and insert the second floppy diskette.
6. Press 'Continue' button.
7. After all the files have been copied to the last floppy disk, press the 'Finish'
button to close the Self-Extracter window
Install
1. Insert the first (or the only) disk of the set into the Floppy
drive.
2. Click Start, click Shutdown, click Restart, and then click OK.
3. Follow the on-screen instructions.
Instructions for DELL_PERC-5-I-ADAPTER_A06_R189433.EXE
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Extract Files
1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package
2. Click Continue.
3. Specify the location to unzip the files.
4. Click on the OK button to extract files.
After the files are extracted the message all files were successfully unzipped will appear.
5. Click the OK button to exit from the installer.
Installation
1. Copy extracted files to bootable media.
2. Reboot system to bootable media.
3. Execute update.bat to perform flash.
4. After flash is complete, remove bootable media.
5. Reboot system for changes to take effect.
Instructions for R189433.txt:
1) Click Download now.
The File Download window appears.
2) Click the Save button.
The Save As window appears.
3) Select Desktop using the drop-down menu to the right of Save in.
4) Click the Save button.
A progress meter moves as the download is completed.
5) If necessary, click X in the upper right-hand corner of the Download Progress Window to close it upon completion.
6) Double click the Icon on your desktop for the newly saved file.
The Dell Bios Release Notes window appears.
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Diskette Creation
1. Browse to the location where you downloaded the file and double-click the new file to create the diskette set.
2. Insert a blank diskette then click Continue.
3. When prompted, repeat step 2 until you reach the end of the diskette set. Label each diskette with a disk number starting from 1.
4. After all the files have been copied to the last diskette, click Finish.
Hard Drive Floppy Disk Creation
1. Get 2 blank, formatted floppy disks.
2. Double-click the new icon (it looks like a floppy diskette) on
the desktop. The Self-Extractor window appears.
3. Click the 'Continue' button on the self-extractor window after inserting
one of the formatted floppies.
4. The utility prompts the user to insert the second floppy diskette after
it completes writing on the first floppy.
5. Remove the first floppy and insert the second floppy diskette.
6. Press 'Continue' button.
7. After all the files have been copied to the last floppy disk, press the 'Finish'
button to close the Self-Extracter window
Install
1. Insert the first (or the only) disk of the set into the Floppy
drive.
2. Click Start, click Shutdown, click Restart, and then click OK.
3. Follow the on-screen instructions.
Instructions for DELL_PERC-5-I-ADAPTER_A06_R189433.EXE
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Extract Files
1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package
2. Click Continue.
3. Specify the location to unzip the files.
4. Click on the OK button to extract files.
After the files are extracted the message all files were successfully unzipped will appear.
5. Click the OK button to exit from the installer.
Installation
1. Copy extracted files to bootable media.
2. Reboot system to bootable media.
3. Execute update.bat to perform flash.
4. After flash is complete, remove bootable media.
5. Reboot system for changes to take effect.
Instructions for R189433.txt:
1) Click Download now.
The File Download window appears.
2) Click the Save button.
The Save As window appears.
3) Select Desktop using the drop-down menu to the right of Save in.
4) Click the Save button.
A progress meter moves as the download is completed.
5) If necessary, click X in the upper right-hand corner of the Download Progress Window to close it upon completion.
6) Double click the Icon on your desktop for the newly saved file.
The Dell Bios Release Notes window appears.
Ajutor și tutoriale pentru drivere
Pentru mai multe descărcări, accesați Drivere și descărcări. Pentru ajutor privind utilizarea informațiilor de pe această pagină, accesați Tutoriale și ajutor pentru drivere.