Dell PERC H200 Integrated Modular, v.07.01.24.00, A01
Este necesară repornirea INSTALATE AUTOMAT Acest fișier a fost instalat automat ca parte a unei actualizări recente. Dacă întâmpinați orice probleme, puteți descărca și reinstala manual.Conținutul acestei pagini este posibil să fi fost tradus automat. Pentru a furniza feedback, completați formularul din partea de jos a paginii.
Dell PERC H200 Integrated Modular Firmware Release
Recomandate
Găsiți cea mai bună descărcare pentru sistemul dvs.
Introduceți detaliile produsului pentru a vedea cele mai recente informații despre driverele sistemului dvs.Asistență căutare
Introduceți eticheta de service Dell sau modelul
Doriți să vă căutați produsul? Introduceți un identificator de produs. Arătați-mi cum
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Conectați-vă la Windows ca administrator pentru a utiliza scanarea automată. Dacă sunteți deja conectat ca administrator și vedeți acest mesaj, reporniți sistemul. Sistemul dvs. este gestionat de către administratorul IT, iar caracteristicile pot fi limitate.
Găsiți mai multe actualizări. Utilizați SupportAssist pentru a găsi cele mai recente actualizări ale driverelor pentru dispozitivul dvs.
Fixes & Enhancements
- Firmware flash of SATA drives is now functional.
- Fixed intermittent device mapping failure in the Option ROM.
- Fixed issue in which a command timeout may occur following large numbers of data frames
with transmission errors.
Citiți mai multe- Fixed intermittent device mapping failure in the Option ROM.
- Fixed issue in which a command timeout may occur following large numbers of data frames
with transmission errors.
Versiune
07.01.24.00, A01
Data lansării:
06 dec. 2011
Tip de descărcare
Firmware
Categorie
Dispozitiv RAID SAS
Importanță
RecommendedDell Technologies recomandă aplicarea acestei actualizări în următorul ciclu de actualizare programat. Actualizarea conține modificări pentru menținerea stării generale de funcționare a sistemului. Acesta asigură faptul că software-ul sistemului rămâne actual și compatibil cu alte module de sistem (firmware, BIOS, drivere și software) și poate include alte caracteristici noi.
Formate disponibile View Important Information
Format fișier Actualizați pachetul pentru MS Windows pe 32 de biți
Nume fișier: RAID_FRMW_WIN_R255065.EXE
Dimensiune fișier: 4.93 MB
Acesta este un fișier mare. În funcție de viteza conexiunii, descărcarea poate dura mai mult timp.
Descriere format:
Dell Update Packages (DUP) in Microsoft Windows 32bit format have been designed to run on Microsoft Windows 64bit Operating Systems. Dell Update Packages (DUP) in Microsoft Windows 64bit format will only run on Microsoft Windows 64bit Operating Systems. When selecting a device driver update be sure to select the one that is appropriate for your operating system.
Pentru a asigura integritatea descărcării, verificați valoarea cifrei de control.
MD5:
06DB8A387D8544825595FDFACD2B70B4
SHA1:
Not available
SHA-256:
Not available
Format fișier A GnuPG file which contains a cryptographic signature
Nume fișier: RAID_FRMW_LX_R255065.BIN.sign
Dimensiune fișier: 194 Bytes
Acesta este un fișier mare. În funcție de viteza conexiunii, descărcarea poate dura mai mult timp.
Descriere format:
The GnuPG signature for Red Hat Linux Update Package can be used to authenticate Dell's identity in the correlated Red Hat Linux Update Package.
Pentru a asigura integritatea descărcării, verificați valoarea cifrei de control.
MD5:
37E82EB341053F5C2CC159F3E9DAAA24
SHA1:
Not available
SHA-256:
Not available
Format fișier ZipPack External
Nume fișier: DELL_PERC-H200-INTEGRATED-MO_A01_R255065.exe
Dimensiune fișier: 753.99 KB
Acesta este un fișier mare. În funcție de viteza conexiunii, descărcarea poate dura mai mult timp.
Descriere format:
This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.
Pentru a asigura integritatea descărcării, verificați valoarea cifrei de control.
MD5:
8afe102b5a1a6ead3fc504b440f19802
SHA1:
4fe10d8767d43ecc904be2b3d3908582f850ac00
SHA-256:
Not available
Format fișier External release notes
Nume fișier: R255065.txt
Dimensiune fișier: 2.94 KB
Acesta este un fișier mare. În funcție de viteza conexiunii, descărcarea poate dura mai mult timp.
Descriere format:
This file format contains plain text which can be viewed with a standard text editor.
Pentru a asigura integritatea descărcării, verificați valoarea cifrei de control.
MD5:
5943f9f825277b27933de1f5c18c5d62
SHA1:
Not available
SHA-256:
Not available
Format fișier Update Package for Red Hat Linux
Nume fișier: RAID_FRMW_LX_R255065.BIN
Dimensiune fișier: 3.71 MB
Acesta este un fișier mare. În funcție de viteza conexiunii, descărcarea poate dura mai mult timp.
Descriere format:
Dell Update Packages for Linux can be used as stand-alone applications that ensure that specific validation criteria are met, then apply an update.
Note: Update Packages for Linux are open source. See the Dell Update Packages for Linux Readme for details.
Note: Update Packages for Linux are open source. See the Dell Update Packages for Linux Readme for details.
Pentru a asigura integritatea descărcării, verificați valoarea cifrei de control.
MD5:
70AC0D35FD3577A2316FE707C9E7416D
SHA1:
Not available
SHA-256:
Not available
Prin descărcare, acceptați termenii Dell Software License Agreement.
Informații importante
- When installing an OS, be sure to select a Boot Device in CTRL+C. In CTRL+C, under SAS Topology, scroll down to the desired Physical Disk or Virtual Disk and enter ALT+B to select the device as your Boot Device.
- Resynch, Background Init and Consistency Check processes will always occur serially.
- When viewing SATA physical disk properties from Ctrl-C or other management applications, Vendor Identification must be translated as "ATA" followed by blanks. Please see SATA translation specification, revision 5, pages 24-25 for more details.
- When adding a PERC H200 controller to a system, either by physically adding an adapter or by enabling the integrated SAS controller in the system BIOS, the new controller may need to be added to the controller boot order in the PERC H200 BIOS configuration Utility.
At POST, hit CTRL-C to enter the utility and verify or modify the controller boot order.
- Resynch, Background Init and Consistency Check processes will always occur serially.
- When viewing SATA physical disk properties from Ctrl-C or other management applications, Vendor Identification must be translated as "ATA" followed by blanks. Please see SATA translation specification, revision 5, pages 24-25 for more details.
- When adding a PERC H200 controller to a system, either by physically adding an adapter or by enabling the integrated SAS controller in the system BIOS, the new controller may need to be added to the controller boot order in the PERC H200 BIOS configuration Utility.
At POST, hit CTRL-C to enter the utility and verify or modify the controller boot order.
Sisteme de operare acceptate
Nu se aplică
Se aplică pentru
PERC H200 Integrated Modular
Instrucțiuni de instalare
Performing the Firmware Upgrade
NOTE: This initial section of the Installation Instructions applies only to configurations with (greater than) 2TB SEDs.
1. Update the firmware version to this version using preferred method below (Zip Pack, Windows DUP, Linux DUP).
2. Reboot for the new FW take effect
3. Un-assign any (greater than) 2TB SED Dedicated or Global Hot Spares in the configuration. Not all configurations have hot spares.
4. Use CTRL-R or OMSS to issue Instant Secure Erase to all un-configured (greater than) 2TB SED drives (all data in these drives will be lost)
5. Re-assign (greater than) 2TB SED Hot Spares.
Zip pack:
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your
hard drive.
Extract Files
1. Browse to the location where you downloaded the file and double-click the
new file to unzip the download package
2. Click Continue.
3. Specify the location to unzip the files.
4. Click onthe OK button to extract files.
After the files are extracted the message all files were successfully
unzipped will appear.
5. Click the OK button to exit from the installer.
Installation
1. Copy extracted files to bootable media.
2. Reboot system to bootable media.
3. Execute update.bat to perform flash.
5. After flash is complete, remove bootable media.
4. Reboot system for changes to take effect.
Windows Update Package:
Download
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click Save to save the file to
your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window
before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.
Linux Update Package:
Download
1. Click the Download Now linkto download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Installation
1. Read over the release information presented by executing the
./FRMW_LX_RXXXXXX.BIN --version command from the shell.
2. Download and install any prerequisites identified in the above step before
proceeding.
3. Run the update by executing ./FRMW_LX_RXXXXXX.BIN from the shell.
4. Follow the remaining prompts to perform the update.
GnuPG Signature of Dell Update Package Instructions for FRMW_LX_RXXXXXX.BIN:
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Installation
1. Import the Dell public key. (You only need to do this once on your system.)
2. Verify the Dell Update Package by using its signature file, FRMW_LX_RXXXXXX.BIN.
NOTE: This initial section of the Installation Instructions applies only to configurations with (greater than) 2TB SEDs.
1. Update the firmware version to this version using preferred method below (Zip Pack, Windows DUP, Linux DUP).
2. Reboot for the new FW take effect
3. Un-assign any (greater than) 2TB SED Dedicated or Global Hot Spares in the configuration. Not all configurations have hot spares.
4. Use CTRL-R or OMSS to issue Instant Secure Erase to all un-configured (greater than) 2TB SED drives (all data in these drives will be lost)
5. Re-assign (greater than) 2TB SED Hot Spares.
Zip pack:
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your
hard drive.
Extract Files
1. Browse to the location where you downloaded the file and double-click the
new file to unzip the download package
2. Click Continue.
3. Specify the location to unzip the files.
4. Click onthe OK button to extract files.
After the files are extracted the message all files were successfully
unzipped will appear.
5. Click the OK button to exit from the installer.
Installation
1. Copy extracted files to bootable media.
2. Reboot system to bootable media.
3. Execute update.bat to perform flash.
5. After flash is complete, remove bootable media.
4. Reboot system for changes to take effect.
Windows Update Package:
Download
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click Save to save the file to
your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window
before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.
Linux Update Package:
Download
1. Click the Download Now linkto download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Installation
1. Read over the release information presented by executing the
./FRMW_LX_RXXXXXX.BIN --version command from the shell.
2. Download and install any prerequisites identified in the above step before
proceeding.
3. Run the update by executing ./FRMW_LX_RXXXXXX.BIN from the shell.
4. Follow the remaining prompts to perform the update.
GnuPG Signature of Dell Update Package Instructions for FRMW_LX_RXXXXXX.BIN:
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Installation
1. Import the Dell public key. (You only need to do this once on your system.)
2. Verify the Dell Update Package by using its signature file, FRMW_LX_RXXXXXX.BIN.
Ajutor și tutoriale pentru drivere
Pentru mai multe descărcări, accesați Drivere și descărcări. Pentru ajutor privind utilizarea informațiilor de pe această pagină, accesați Tutoriale și ajutor pentru drivere.