Dell Patches And Fixes (Portable), v. 1.13, A01
INSTALATE AUTOMAT Acest fișier a fost instalat automat ca parte a unei actualizări recente. Dacă întâmpinați orice probleme, puteți descărca și reinstala manual.Conținutul acestei pagini este posibil să fi fost tradus automat. Pentru a furniza feedback, completați formularul din partea de jos a paginii.
Firmware update for the LG DVD-ROM drive only!
Recomandate
Găsiți cea mai bună descărcare pentru sistemul dvs.
Introduceți detaliile produsului pentru a vedea cele mai recente informații despre driverele sistemului dvs.Asistență căutare
Introduceți eticheta de service Dell sau modelul
Doriți să vă căutați produsul? Introduceți un identificator de produs. Arătați-mi cum
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Conectați-vă la Windows ca administrator pentru a utiliza scanarea automată. Dacă sunteți deja conectat ca administrator și vedeți acest mesaj, reporniți sistemul. Sistemul dvs. este gestionat de către administratorul IT, iar caracteristicile pot fi limitate.
Găsiți mai multe actualizări. Utilizați SupportAssist pentru a găsi cele mai recente actualizări ale driverelor pentru dispozitivul dvs.
Fixes & Enhancements
The firmware revision 1.13
corrects a software hang at the "Scanning tracks" screen with Adaptec EZ-CD
Creator which is encountered when Copying a CD-Extra, CD-Plus, or Enhanced CD
media (or any CD media with Audio and Data content).
Citiți mai multecorrects a software hang at the "Scanning tracks" screen with Adaptec EZ-CD
Creator which is encountered when Copying a CD-Extra, CD-Plus, or Enhanced CD
media (or any CD media with Audio and Data content).
Versiune
1.13, A01
Data lansării:
07 iun. 2001
Tip de descărcare
Firmware
Categorie
Corecții și remedieri
Importanță
OptionalDell Technologies recommends reviewing this update to determine if it applies to your system. The update contains changes that impact only certain configurations or provides new features that may or may not apply to your environment.
Formate disponibile
Format fișier One or more self extracting disk images inside of a self extracting zip
Nume fișier: DLGDVD01.exe
Dimensiune fișier: 388.5 KB
Acesta este un fișier mare. În funcție de viteza conexiunii, descărcarea poate dura mai mult timp.
Descriere format:
This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, then double-click it to unzip the set of files. Follow the instructions to complete the installation.
Pentru a asigura integritatea descărcării, verificați valoarea cifrei de control.
MD5:
Not available
SHA1:
Not available
SHA-256:
Not available
Prin descărcare, acceptați termenii Dell Software License Agreement.
Sisteme de operare acceptate
MS-DOS
Instrucțiuni de instalare
To uprade the firmware on your LG DVD-ROM to version 1.13 drive perform the
following steps.
NOTE: To perform this upgrade you will need to have your DVD-ROM and floppy
disk drive connected to your computer. For instructions on how to attach your
floppy drive externally, see your system documentation.
Make sure that your computer is plugged in to AC power before attempting this
upgrade!
Step 1) After you have downloaded the firmware update, locate and
double click on the DLGDVD01.exe file.
Step 2) Insert a blank formatted floppy diskette into drive A: and
click "Setup".
Step 3) After clicking "Setup," follow the onscreen prompts and the files will be
automatically extracted to drive A:.
Step 4) After extracting the files, restart your computer with the floppy
diskette in the drive. If your system does not boot from the
LG DVD-ROM firmware upgrade diskette, see your system documentation
regarding changing the "Boot Sequence" in your system bios.
Step 5) The firmware upgrade process will begin automatically. During the
firmware upgrade process you will see a progress bar with the firmware
update status. Once it has completed, you will see a message with the
updated drive information. If you recieve a message stating "Current
drive is not supported..", your drive is not an LG DVD-ROM or is not
the correct model of LG DVD-ROM drive and this upgrade is not
applicable to your drive. Do not unplug or turn off your machine
while the upgrade is being performed!
Step 6) After the firmware upgrade process is complete, remove the floppy
diskette from the drive and restart the computer.
After restarting, the operating system may re-detect the drive and prompt another restart.
To confirm that the firmware upgrade was completed properly, perform the following steps.
Step 1) To view the firmware revision of the DVD-ROM drive you will need to
look in Windows Device Manager.
Step 2) In Windows 98SE, or Windows Millenium Edition you can access the
Device Manager by first right clicking on your "My Computer" icon.
Next, click on the "Device Manager" tab. Next, click on the "+" next
to "CDROM". Once you have clicked on the "+" next to "CDROM" double
click on "LG DVD-ROM". Next, click on the settings tab. The
"Firmware revision:" in the upper right hand corner should now be
"1.13". If the revision number still shows 1.11 or earlier, run
through the firmware upgrade steps again.
In Windows 2000, it will be necessary to locate the new firmware version in the LG
status window during the flash process, as Windows 2000 lacks a means to report the
firmware version.
following steps.
NOTE: To perform this upgrade you will need to have your DVD-ROM and floppy
disk drive connected to your computer. For instructions on how to attach your
floppy drive externally, see your system documentation.
Make sure that your computer is plugged in to AC power before attempting this
upgrade!
Step 1) After you have downloaded the firmware update, locate and
double click on the DLGDVD01.exe file.
Step 2) Insert a blank formatted floppy diskette into drive A: and
click "Setup".
Step 3) After clicking "Setup," follow the onscreen prompts and the files will be
automatically extracted to drive A:.
Step 4) After extracting the files, restart your computer with the floppy
diskette in the drive. If your system does not boot from the
LG DVD-ROM firmware upgrade diskette, see your system documentation
regarding changing the "Boot Sequence" in your system bios.
Step 5) The firmware upgrade process will begin automatically. During the
firmware upgrade process you will see a progress bar with the firmware
update status. Once it has completed, you will see a message with the
updated drive information. If you recieve a message stating "Current
drive is not supported..", your drive is not an LG DVD-ROM or is not
the correct model of LG DVD-ROM drive and this upgrade is not
applicable to your drive. Do not unplug or turn off your machine
while the upgrade is being performed!
Step 6) After the firmware upgrade process is complete, remove the floppy
diskette from the drive and restart the computer.
After restarting, the operating system may re-detect the drive and prompt another restart.
To confirm that the firmware upgrade was completed properly, perform the following steps.
Step 1) To view the firmware revision of the DVD-ROM drive you will need to
look in Windows Device Manager.
Step 2) In Windows 98SE, or Windows Millenium Edition you can access the
Device Manager by first right clicking on your "My Computer" icon.
Next, click on the "Device Manager" tab. Next, click on the "+" next
to "CDROM". Once you have clicked on the "+" next to "CDROM" double
click on "LG DVD-ROM". Next, click on the settings tab. The
"Firmware revision:" in the upper right hand corner should now be
"1.13". If the revision number still shows 1.11 or earlier, run
through the firmware upgrade steps again.
In Windows 2000, it will be necessary to locate the new firmware version in the LG
status window during the flash process, as Windows 2000 lacks a means to report the
firmware version.
Ajutor și tutoriale pentru drivere
Pentru mai multe descărcări, accesați Drivere și descărcări. Pentru ajutor privind utilizarea informațiilor de pe această pagină, accesați Tutoriale și ajutor pentru drivere.