Dell 32 Bit Diagnostics (Graphical User Interface version), A1220
INSTALATE AUTOMAT Acest fișier a fost instalat automat ca parte a unei actualizări recente. Dacă întâmpinați orice probleme, puteți descărca și reinstala manual.Conținutul acestei pagini este posibil să fi fost tradus automat. Pentru a furniza feedback, completați formularul din partea de jos a paginii.
Dell 32-bit Diagnostics v1220
Recomandate
Găsiți cea mai bună descărcare pentru sistemul dvs.
Introduceți detaliile produsului pentru a vedea cele mai recente informații despre driverele sistemului dvs.Asistență căutare
Introduceți eticheta de service Dell sau modelul
Doriți să vă căutați produsul? Introduceți un identificator de produs. Arătați-mi cum
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Conectați-vă la Windows ca administrator pentru a utiliza scanarea automată. Dacă sunteți deja conectat ca administrator și vedeți acest mesaj, reporniți sistemul. Sistemul dvs. este gestionat de către administratorul IT, iar caracteristicile pot fi limitate.
Găsiți mai multe actualizări. Utilizați SupportAssist pentru a găsi cele mai recente actualizări ale driverelor pentru dispozitivul dvs.
Fixes & Enhancements
DellDiag.exe has been enhanced to support new systems.
Citiți mai multeVersiune
A1220, A1220
Data lansării:
04 sept. 2003
Tip de descărcare
Diagnostics Utility
Categorie
Diagnosticare
Importanță
OptionalDell Technologies recommends reviewing this update to determine if it applies to your system. The update contains changes that impact only certain configurations or provides new features that may or may not apply to your environment.
Formate disponibile
Format fișier Extrage fișiere direct pe discul local
Nume fișier: CDD1220.exe
Dimensiune fișier: 2.28 MB
Acesta este un fișier mare. În funcție de viteza conexiunii, descărcarea poate dura mai mult timp.
Descriere format:
This file format consists of an archive of files that may be decompressed to a directory on the hard drive. The installation can then be done from that directory.
Pentru a asigura integritatea descărcării, verificați valoarea cifrei de control.
MD5:
Not available
SHA1:
Not available
SHA-256:
Not available
Format fișier One or more self extracting disk images inside of a self extracting zip
Nume fișier: CD122000.exe
Dimensiune fișier: 3.14 MB
Acesta este un fișier mare. În funcție de viteza conexiunii, descărcarea poate dura mai mult timp.
Descriere format:
This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, then double-click it to unzip the set of files. Follow the instructions to complete the installation.
Pentru a asigura integritatea descărcării, verificați valoarea cifrei de control.
MD5:
Not available
SHA1:
Not available
SHA-256:
Not available
Format fișier ZipPack External
Nume fișier: CZ122000.exe
Dimensiune fișier: 1.99 MB
Acesta este un fișier mare. În funcție de viteza conexiunii, descărcarea poate dura mai mult timp.
Descriere format:
This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.
Pentru a asigura integritatea descărcării, verificați valoarea cifrei de control.
MD5:
Not available
SHA1:
Not available
SHA-256:
Not available
Prin descărcare, acceptați termenii Dell Software License Agreement.
Sisteme de operare acceptate
Nu se aplică
Instrucțiuni de instalare
Custom Instructions for CD122000.exe:
Diskette creation using CD122000.exe
Download
1. Click the location, e.g. Americas, from which you want to download the file.
2. If the Export Compliance Disclaimer window appears, click Yes, I Accept this Agreement.
3. When the File Download window appears, click Save this program to disk and click OK. The Save In window appears.
4. From the Save In drop-down menu, click to select Desktop and then click Save. The file will download to your desktop.
5. If a Download Complete window appears, click Close. A new icon appears on your desktop.
Diskette Creation
1. Double-click the new icon on the desktop. The Self-Extractor window appears.
2. Click Setup. An MS-DOS window appears with a message indicating how many diskettes you will need.
3. Press the [ENTER] key. A message appears prompting you to insert a blank diskette. Insert a diskette into the drive.
4. Press the [ENTER] key. A message appears indicating that all data on the disk will be erased.
5. Press the [y] key and then press the [ENTER] key. The files are copied to the diskette. Once the files have been copied to the diskette a message appears prompting you to insert the next diskette.
6. Repeat steps 3 - 5 until you reach the end of the diskette set. Label each diskette with a disk number starting from 1.
7. After all the files have been copied to the last diskette, press the [ENTER] key and the MS-DOS window closes.
Running the Diagnostics
1. Insert the first diskette of the set into your diskette drive.
2. Click Start, click Shutdown, click Restart, and then click OK to reboot your system.
3. Follow the on-screen instructions.
Custom Instructions for CZ122000.exe:
Hard Drive Installation using CZ122000.exe
Download
1. Click the location, e.g. Americas, from which you want to download the file.
2. If the Export Compliance Disclaimer window appears, click Yes, I Accept this Agreement.
3. When the File Download window appears, click Save this program to disk and click OK. The Save In window appears.
4. From the Save In drop-down menu click to select Desktop and then click Save. The file will download to your desktop.
5. If a Download Complete window appears, click Close. A new icon appears on your desktop.
Install
1. Double-click the new icon on the desktop labeled CZ122000.exe.
2. When the Self-Extractor window appears, click Continue.
3. A dialog box will prompt you for the directory to unzip the files to. Normally you should leave the default path. This path must be on an MS-DOS FAT partition. If you extract the files to any other type of partition (for example NTFS) you will not be able to run the diagnostics. Write down the path where the files were placed.
4. Click OK.
5. If you get a prompt asking you if you would like to create the directory, click YES.
6. After a few seconds a dialog box will appear that says that all files were successfully unzipped. Click OK to exit from the installer.
Running the Diagnostics from a Hard Drive
1. In order to run the diagnostics you must boot to an MS-DOS prompt. If necessary create a DOS boot disk. For more information, refer to Dell Knowledge Base Article TT1014475 - "What can I use for a boot disk with CD-ROM support?"
2. Insert the diskette into the diskette drive and reboot the computer.
3. At the A:/> prompt, type "C:" (or the drive letter where you saved the diagnostics to) and then press the [ENTER] key.
4. Type "cd c:\dell\drivers\Rxxxx" (or the path that you specified above) and then press [ENTER].
5. Type "Delldiag" and then press [ENTER] to run the diagnostics.
6. Follow the on-screen instructions.
Custom Instructions for CDD1220.exe:
Diskette creation using CDD1220.exe
Download file CDD1220.EXE to a new folder on your system.
1. Click the "Download now" link.
2. If the Export Compliance Disclaimer window appears, please read the agree
Diskette creation using CD122000.exe
Download
1. Click the location, e.g. Americas, from which you want to download the file.
2. If the Export Compliance Disclaimer window appears, click Yes, I Accept this Agreement.
3. When the File Download window appears, click Save this program to disk and click OK. The Save In window appears.
4. From the Save In drop-down menu, click to select Desktop and then click Save. The file will download to your desktop.
5. If a Download Complete window appears, click Close. A new icon appears on your desktop.
Diskette Creation
1. Double-click the new icon on the desktop. The Self-Extractor window appears.
2. Click Setup. An MS-DOS window appears with a message indicating how many diskettes you will need.
3. Press the [ENTER] key. A message appears prompting you to insert a blank diskette. Insert a diskette into the drive.
4. Press the [ENTER] key. A message appears indicating that all data on the disk will be erased.
5. Press the [y] key and then press the [ENTER] key. The files are copied to the diskette. Once the files have been copied to the diskette a message appears prompting you to insert the next diskette.
6. Repeat steps 3 - 5 until you reach the end of the diskette set. Label each diskette with a disk number starting from 1.
7. After all the files have been copied to the last diskette, press the [ENTER] key and the MS-DOS window closes.
Running the Diagnostics
1. Insert the first diskette of the set into your diskette drive.
2. Click Start, click Shutdown, click Restart, and then click OK to reboot your system.
3. Follow the on-screen instructions.
Custom Instructions for CZ122000.exe:
Hard Drive Installation using CZ122000.exe
Download
1. Click the location, e.g. Americas, from which you want to download the file.
2. If the Export Compliance Disclaimer window appears, click Yes, I Accept this Agreement.
3. When the File Download window appears, click Save this program to disk and click OK. The Save In window appears.
4. From the Save In drop-down menu click to select Desktop and then click Save. The file will download to your desktop.
5. If a Download Complete window appears, click Close. A new icon appears on your desktop.
Install
1. Double-click the new icon on the desktop labeled CZ122000.exe.
2. When the Self-Extractor window appears, click Continue.
3. A dialog box will prompt you for the directory to unzip the files to. Normally you should leave the default path. This path must be on an MS-DOS FAT partition. If you extract the files to any other type of partition (for example NTFS) you will not be able to run the diagnostics. Write down the path where the files were placed.
4. Click OK.
5. If you get a prompt asking you if you would like to create the directory, click YES.
6. After a few seconds a dialog box will appear that says that all files were successfully unzipped. Click OK to exit from the installer.
Running the Diagnostics from a Hard Drive
1. In order to run the diagnostics you must boot to an MS-DOS prompt. If necessary create a DOS boot disk. For more information, refer to Dell Knowledge Base Article TT1014475 - "What can I use for a boot disk with CD-ROM support?"
2. Insert the diskette into the diskette drive and reboot the computer.
3. At the A:/> prompt, type "C:" (or the drive letter where you saved the diagnostics to) and then press the [ENTER] key.
4. Type "cd c:\dell\drivers\Rxxxx" (or the path that you specified above) and then press [ENTER].
5. Type "Delldiag" and then press [ENTER] to run the diagnostics.
6. Follow the on-screen instructions.
Custom Instructions for CDD1220.exe:
Diskette creation using CDD1220.exe
Download file CDD1220.EXE to a new folder on your system.
1. Click the "Download now" link.
2. If the Export Compliance Disclaimer window appears, please read the agree
Ajutor și tutoriale pentru drivere
Pentru mai multe descărcări, accesați Drivere și descărcări. Pentru ajutor privind utilizarea informațiilor de pe această pagină, accesați Tutoriale și ajutor pentru drivere.