PowerConnect, M8024-k, версия 5.0.0.4, A08

Требуется перезапуск АВТОМАТИЧЕСКАЯ УСТАНОВКА Этот файл был автоматически установлен в рамках недавнего обновления. При возникновении каких-либо проблем этот файл можно вручную загрузить и переустановить.
Содержимое этой страницы могло быть автоматически переведено. Чтобы оставить отзыв, заполните форму в нижней части страницы.
This firmware is for the M8024-K version of PowerConnect switch and has new features and bug fixes that are applicable to this switch or possibly other switch models as noted in the Fixes and Enhancements section.
Рекомендуется

Найдите наиболее подходящий файл для вашей системы

Введите сведения о вашем продукте, чтобы просмотреть актуальную информацию о драйверах для вашей системы

Поиск по поддержке

Введите сервисный код или модель Dell

Хотите найти свой продукт? Введите идентификатор продукта. Показать как

Этот драйвер несовместим

Этот драйвер неприменим к выбранному продукту. Выберите другой продукт, чтобы повторно ввести сведения для данного драйвера, или посетите страницу поддержки продукта, чтобы просмотреть все драйверы для другого продукта.

Дополнительные обновления. Используйте SupportAssist для поиска всех последних обновлений драйверов для вашего устройства.

Исправления и улучшения

Fixes and Enhancement:

Fixes
- OpenManage UI does not accept blank space character for port description.
- "show spanning-tree detail" counters are non-zero for inactive interfaces.
- Unable to remove 0.0.0.0 as default gateway on OOB interface using the web.
- When connecting via SSH, the user is not prompted to acknowledge the MOTD
- "encapsulation" command is unavailable in interface range mode
- M8024-k OpenManage Web UI stack view display
- "spanning-tree transmit hold-count" command's value is not reflected in show command
- Inconsistent behavior in single and range interface mode of "spanning-tree port
- CLI command "no passwords strength exclude-keyword" requires
- Inline help for "spanning-tree loopguard" is incorrect.
- Some of the options of "show ip pim" command are not available in user EXEC mode.
- Configuration command "logging " accepts more than 63 characters.
- dot1dTpPortMaxInfo is displaying maximum frame size that includes MAC header.
- If a user attempts to create a certificate request with information that is not identical to the key generated, the user is not given an error/ informative response letting them know there is a conflict between their key and their request.
- OIDagentInventorySupportedUnitExpected CodeVer provides incorrect display string 1.0.176.0
- 1. Changes are not applied to the correct interfaces on the pages "System->sFlow->Sampler Configuration" "System->sFlow->Poll Configuration" 2. Incorrect error message is displayed when not configured Receiver index is applied to interface on "System->sFlow->Poll Configuration" page.
- "show ip route configured ...longer-prefixes" reports that default gateway is not configured, which is incorrect.
- CLI command "show ip route 192.168.2.2 /24" not ignoring host bits.
- "ipv6 pim join-prune interval" command does not work
- Macro input string does not accept more than 20 characters
- startup-config failed error message is displayed when finishing the Dell Easy Setup Wizard
- In stacking environment, "show system temperature" command output is corrupted
- Error message for port enable / disable on IE on 8024F combo ports
- Alignment issues in the output of "show voice vlan interface" command
- CLI command "show ip igmp snooping" output is truncated.
- vrrp ip command accepts invalid IP addresses
- CLI command "isdp enable" does not work for a range of ports
- "show interface Priority-Flow-Control" command output is not formatted correctly
- CLI command "show ip route 192.168.2.2 /24" not ignoring host bits.
- Port channel goes down during master failover.
- switches rebooting - possible crash dump w/ emWeb
- general mode vlan does not show up after a reload, it shows up in access vlan
- SNMP OIDs 1.3.6.1.4.1.674.10895.3000.1.2.110.7.x causing switch crash
- Stack ARP Problem
- Stack member units port display is missing in web GUI.
- No response to ICMP with jumbo (ping)
- Ports connected to Intel X520 NIC do not return online after reboot.
- switch reboots randomly.

Enhancements
- 802.1Qaz (ETS) on 8100 series
- Added Native EEE Support for the PC8100 10GBaseT Ports
- Support for 40 Gig (QSFP+) interfaces
- Support for Bootcode upgrade from pre-4.x image to 5.x image without manual system reset.
- Local Preference for LAG
- Full Private VLAN
- CLI output filtering
- Routing Improvements for OSPF
- UDLD
- Administrative Profiles
- AAA Authorization
- TACACS+ Accounting
- Stacking over QSFP+ ports
- QSFP+ diagnostics
- sFlow Support on Port Channels
Развернуть

Версия

v5.0.0.4, A08

Дата выпуска

29 Aug 2012

Тип загрузки

Встроенное ПО

Категория

Сети

Важность

Рекомендуется
Dell Technologies рекомендует применить данное обновление в ходе следующего планового цикла обновления. Обновление содержит изменения для поддержания общей работоспособности системы. Оно гарантирует, что системное ПО останется актуальным и совместимым с другими системными модулями (микропрограммой, BIOS, драйверами и программным обеспечением), а также может включать в себя другие новые функции.
Доступные форматы Прочитать важную информацию

Формат файла: Извлечение файлов напрямую на локальный диск
Имя файла: PCM8024kv5.0.0.4a08.zip
Размер файла: 13.02 MB
Это большой файл. В зависимости от скорости подключения скачивание может занять некоторое время.
Описание формата:
Этот формат файла состоит из архивных файлов, которые могут быть распакованы в каталог на жестком диске. Установка может быть выполнена из этого каталога.
Чтобы убедиться в целостности скачанного файла, проверьте значение его контрольной суммы.
MD5:
82d872fa083700ac8b8b2926e4035c8b
SHA1:
f49187d2d940705d64d4cdf6c43b01be34b177c8
SHA-256:
0339219fe1fde9805ab19f787af51fa4a0361666bc9e5c80b6588604ffad4462

Загружая файл, вы принимаете условия лицензионного соглашения об использовании программного обеспечения Dell. (на английском языке)

Дополнительные сведения

Показать все | Скрыть все
Please follow software update instructions included in the zip file - "Upgrading PowerConnect Switches from Version 2.x.x.x or 3.x.x.x or 4.x.x.x to 5.0.0.4 Firmware.pdf"
PowerConnect M8024-K
Please follow software update instructions included in the zip file - "Upgrading PowerConnect Switches from Version 2.x.x.x or 3.x.x.x or 4.x.x.x to 5.0.0.4 Firmware.pdf"

Reboot will be required

Требуется помощь по вопросам, связанным с сетевым подключением?

Найдите решение в руководстве Dell по устранению неполадок и использованию сети.

Справка и руководства по драйверам