Выключение компьютера или его отсоединение от источника питания во время обновления BIOS может привести к повреждению компьютера. Во время обновления компьютер перезагрузится и на короткое время может отобразиться черный экран.
Перед обновлением прочитайте инструкции по установке и важные сведения, приведенные ниже.
Dell OptiPlex System BIOS, A10
АВТОМАТИЧЕСКАЯ УСТАНОВКА Этот файл был автоматически установлен в рамках недавнего обновления. При возникновении каких-либо проблем этот файл можно вручную загрузить и переустановить.Найдите наиболее подходящий файл для вашей системы
Введите сведения о вашем продукте, чтобы просмотреть актуальную информацию о драйверах для вашей системыПоиск по поддержке
Введите сервисный код или модель Dell
Хотите найти свой продукт? Введите идентификатор продукта. Показать как
Этот драйвер неприменим к выбранному продукту. Выберите другой продукт, чтобы повторно ввести сведения для данного драйвера, или посетите страницу поддержки продукта, чтобы просмотреть все драйверы для другого продукта.
Дополнительные обновления. Используйте SupportAssist для поиска всех последних обновлений драйверов для вашего устройства.
Исправления и улучшения
1. Clear ESCD when Asset PASS:xx/xx changes.
2. NIC_VENDOR_ID now used in NIC detection.
3. Bumped SMI size from 32K to 64K.
4. Added BBS commands to SMBIOS calling interface
5. Added new enhanced selectable boot feature.
6. Replaced RAM based CRC with FLASH based CRC.
7. Fixed potential ECC error.
8. Initial VGA adapter address move to above 3G.
9. Corrected problem where 3BC was allowed when LPT is in EPP mode.
Версия
Дата выпуска
Тип загрузки
Категория
Важность
ОпциональноЗагружая файл, вы принимаете условия лицензионного соглашения об использовании программного обеспечения Dell. (на английском языке)
Creating the disk:
NOTE: This procedure requires one blank, formatted 3.5-inch floppy disk; label the disk BIOS.
1. When the File Download window appears, click “Save this program to disk”.
2. Choose “Desktop” as the location.
3. Click “Ok”.
4. After the file has finished copying files, click “Close”.
5. Press the “Windows” + “M” keys at the same time to minimize all the open windows.
6. Find the downloaded file on your Desktop, if it looks like a floppy disk, double-click it and skip to Step 7.
NOTE: If the Security Warning window appears, click “Yes”.
7. Click “Setup”.
A DOS Window appears.
8. Press the “Enter” key.
9. Insert the floppy disk into the floppy disk drive and press the “Enter” key.
10. Press the “Y” key to begin copying files.
An End of the disk set prompt appears.
11. Press the “Enter” key.
12. Click the “Start” button, click “Run”, and then type a: in the Open box. Click “OK’.
The list of files on the floppy disk appears.
13. If there is a readme file in the list, double-click it for additional instructions.
14. Close all open windows and leave the disk in the floppy drive. Skip to the section Flashing the BIOS below
NOTE: If you are creating this disk on another computer, remove the disk. Then insert it into the system that needs the BIOS flashed, and resume the procedure.
Non-Packaged
Creating the disk:
NOTE: This procedure requires one blank bootable, formatted 3.5-inch floppy disk; label the disk BIOS.
1. When the File Download window appears, click “Save this program to disk”.
2. Choose “Desktop” as the location.
3. Click “Ok”.
4. After the file has finished copying files, click “Close”.
5. Press the “Windows” + “M” keys at the same time to minimize all the open windows.
6. Insert the blank bootable formatted 3.5-inch floppy disk.
7. Right-click the copy of the file, point to “Send To , click “3 1/2 Floppy (a)”, and then skip to the section Flashing the BIOS below.
Flashing the BIOS:
NOTICE: Changing the system BIOS may result in unintended side affects, such as incompatibility of the new BIOS with installed hardware. If problems arise after a BIOS change, it may be necessary to return the system to the original version of the BIOS.
1. If you are flashing the BIOS on a portable computer, be sure that the AC adapter is plugged in and the computer is not operating on battery power.
2. Ensure that the Flash BIOS disk is inserted into the floppy disk drive.
3. Click the “Start” button, click “Shut Down”, click “Restart”, and then click “Ok”.
The computer should restart and boot to the floppy disk.
NOTE: If the flash BIOS program does not start, and you see only an A:\ prompt, refer to the instructions from the Dell File Library page for the BIOS update or to the Readme.txt instructions. Generally, you will type the name of the executable flash BIOS file such as BGX1_A10.exe for BIOS version A10 on the OptiPlex™ series system.
A Press any key to continue prompt appears.
4. Press the “Enter” key.
A Press Y to replace old BIOS with new BIOS prompt appears.
5. Press the “Y” key.
NOTICE: Do not interrupt the system during this process. Please refrain from pressing any keys on the keyboard, moving the mouse, or interrupting power to the system. Failure to do so could result in damage to the system BIOS.
When the computer has finished updating the BIOS, a Flash program successful. Press any key to reboot prompt appears.
6. Remove the floppy disk and press the “Enter” key.
7. The computer will now restart with the new revision of the BIOS installed.
The boot screen will indicate the BIOS version.
If you encounter device or resource errors after flashing the system BIOS, enter the System Setup, clear the NVRAM and restore the system defaults. For more information, refer to Dell Knowle