American Megatrends (AMI) PERC 2/SC, PERC2/DC, v.6.35.2.32, A02
АВТОМАТИЧЕСКАЯ УСТАНОВКАЭтот файл был автоматически установлен в рамках недавнего обновления. При возникновении каких-либо проблем этот файл можно вручную загрузить и переустановить.
Содержимое этой страницы могло быть автоматически переведено. Чтобы оставить отзыв, заполните форму в нижней части страницы.
Этот файл был автоматически установлен в рамках недавнего обновления. При возникновении каких-либо проблем этот файл можно вручную загрузить и переустановить.
Dell PowerEdge RAID Controller 2/DC and 2/SC Device Driver for Windows 2003.
Version 6.35.2.32
Рекомендуется
Найдите наиболее подходящий файл для вашей системы
Введите сведения о вашем продукте, чтобы просмотреть актуальную информацию о драйверах для вашей системы
Поиск по поддержке
Введите сервисный код или модель Dell
Хотите найти свой продукт? Введите идентификатор продукта.Показать как
Результаты не найдены. По вашему запросу ничего найти не удалось. Измените критерии поиска и повторите попытку.
Этот драйвер несовместим
Этот драйвер неприменим к выбранному продукту. Выберите другой продукт, чтобы повторно ввести сведения для данного драйвера, или посетите страницу поддержки продукта, чтобы просмотреть все драйверы для другого продукта.
Войдите в систему Windows с правами администратора, чтобы использовать автоматическое сканирование. Если вы уже вошли в систему с правами администратора и видите это сообщение, перезагрузите компьютер.Вашей системой управляет ИТ-администратор, и возможности могут быть ограниченны.
Дополнительные обновления. Используйте SupportAssist для поиска всех последних обновлений драйверов для вашего устройства.
Исправления и улучшения
Fixes or Enhancements in this Release
Enhancements: 1) None
Fixes: 1) Minor change to Oemsetup.txt file.
2) Driver no longer filters out all other commands except SCSI READ and SCSI WRITE
Dell Technologies рекомендует ознакомиться с этим обновлением, чтобы определить, применимо ли оно к вашей системе. Данное обновление содержит изменения, которые действуют только в определенных конфигурациях, или новые функции, которые могут не подходить для существующей среды.
Формат файла:Пакет обновлений для 32-разрядной версии MS Windows
Имя файла:RAID-DRVR-R65396.exe
Размер файла:1.09 MB
Это большой файл. В зависимости от скорости подключения скачивание может занять некоторое время.
Описание формата:
Пакеты обновлений Dell (DUP) в 32-разрядном формате Microsoft Windows могут использоваться и с 64-разрядной операционной системой Microsoft Windows. Пакеты обновлений Dell (DUP) в 64-разрядном формате Microsoft Windows будут работать только с 64-разрядной операционной системой. При выборе обновления драйвера устройства необходимо выбрать тип, подходящий для вашей операционной системы.
Чтобы убедиться в целостности скачанного файла, проверьте значение его контрольной суммы.
MD5:
174753AA1DFEBE31CF7CF990BA907E0D
SHA1:
Отсутствует
SHA-256:
Отсутствует
Формат файла:Извлечение файлов напрямую на локальный диск
Имя файла:PERC2-W2K3-6.35-A02.exe
Размер файла:124 KB
Это большой файл. В зависимости от скорости подключения скачивание может занять некоторое время.
Описание формата:
Этот формат файла состоит из архивных файлов, которые могут быть распакованы в каталог на жестком диске. Установка может быть выполнена из этого каталога.
Dell PowerEdge RAID Controller 2/SC, 2/DC, 4/DC, 4/SC, 3/QC, 3/DC, 3/DCL, 3/SC, 4/DI, and CERC ATA100/4CH, Device Driver for Windows Server 2003.
Version 6.35.2.32
Download
1. Click the "Download Now" link to download the file. 2. If the Export Compliance Disclaimer window appears, click the "I agree" link to accept the agreement. 3. When the File Download window appears, click "Save" to save the file to your hard drive.
Extract Files
1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package. 2. Specify the location to unzip the files – the instructions below assume you extract files to a formatted floppy disk. 3. Click on the unzip button to extract files.
Installation
Dell PowerEdge RAID Controller 4/DC, 4/SC, 3/QC, 3/DC, 3/DCL, 3/SC, 4/DI, and CERC ATA100/4CH, Device Driver for Windows Server 2003.
Version 6.35.2.32
Installing on a new driver on a Windows Server 2003 system
1) Boot the system using the Windows Server 2003 CD. As the message "Press F6 if you need to install a third party SCSI or RAID driver." appears, press F6 immediately.
2) Within a few minutes, a screen appears that asks for additional adapters in the system. Choose 'S'.
3) You are prompted for the driver diskette. Insert the PERC/CERC Windows Server 2003 driver diskette in the floppy drive and press Enter.
4) A list of drivers for PERC/CERC controllers appears. Select the right driver for your installed controller and press Enter to load the driver.
5) A statement is presented saying the driver that you provided is older/newer then the Windows driver.
Press 'S' to use the driver on the floppy.
6) Press Enter again to continue installation process as usual.
Adding the PERC/CERC Driver to an Existing Windows Server 2003.
1) Boot the system to Windows 2003. The Found New Hardware Wizard displays.
2) If you are installing the PERC 3/SC, PERC 4/DC, PERC 4/SC, PERC 4/DI or CERC ATA100/4CH, click on Next and skip to step 5. Otherwise, click Cancel on all the new devices.
3) Restart the system from the shutdown menu.
4) The Found New Hardware Wizard displays again when the system boots to Windows Server 2003. Click on Next.
5) Select Search for a suitable driver and click "Next" to continue.
6) Select Floppy disk drive, insert the PERC/CERC Windows 2003 driver diskette created above and click Next to continue.
7) Continue to click on Next and finish the installation.
8) The Found New Hardware Wizard screen appears one time for each PERC 3/SC, PERC 4/SC, PERC 4/DC controller, three times for each PERC 3/DC or PERC 3/DCL controller and four times for each PERC 3/QC. Repeat steps 5 - 7 for each time the wizard displays to complete installation of the card.
9) To confirm driver installation, right click on My Computer and select Manage. Click on Device Manager, then click on SCSI and RAID controllers to see the newly added PERC 3 controller(s) in the list.
After finishing the driver update, YOU MUST REBOOT YOUR SERVER.
Updating the PERC/CERC Driver on an Existing Windows Server 2003.
If your server is already running Windows Server 2003, use the following steps to update the PERC Windows Server 2003 driver.
Note: If your driver supports multiple RAID controllers, make sure to upgrade all the RAID controllers in your system that your driver supports.
1) Insert the PERC/CERC Windows Server 2003 driver diskette.
2) Position the mouse pointer to the my computer icon in the Start menu and right click and select Manage.
3) Position the mouse pointer on Device Manager and click the left mouse button.
4) Position the mouse pointer on SCSI and RAID controllers and double click.