Dell Microsoft Hotfix and KB Updates for NAS, v.1.1.0.0, A00
АВТОМАТИЧЕСКАЯ УСТАНОВКАЭтот файл был автоматически установлен в рамках недавнего обновления. При возникновении каких-либо проблем этот файл можно вручную загрузить и переустановить.
Содержимое этой страницы могло быть автоматически переведено. Чтобы оставить отзыв, заполните форму в нижней части страницы.
Этот файл был автоматически установлен в рамках недавнего обновления. При возникновении каких-либо проблем этот файл можно вручную загрузить и переустановить.
This contains Windows Storage Server 2008 Update 1 and Update 2 which consist of updates for the following issues:
• KB968675 - Storport Update This update prevents a memory leak that is caused by a temporary unit condition.
• KB970662 - Single Instance Storage (SIS) Update This update resolves the following issues with SIS: A memory leak can occur with Groveler.exe if a forced rescan is initiated. There can be timing issues in SIS copy-on-first-write operations. NTFS re-ordering might be incorrectly handled after a forced shutdown.
• KB971191 - SIS links that have file sizes less than 1KB get set to normal files after restoring SIS v1 data to a SIS v2 volume. This issue can occur when backing up and restoring SIS files (links) that have been truncated to a length less than or equal to 1 KB from a migrated Windows Storage Server 2003 R2 SIS-enabled volume to Windows Storage Server 2008.
• KB970658 – iSCSI initiator appears to fail on reconnection After a lost iSCSI initiator connection is recovered, the session state in iSCSI Initiator interface may continue to display "Reconnecting." This issue only applies to application servers connecting to Microsoft iSCSI Software Target using the iSCSI Initiator.
• KB971365 – Added support for GPT disks greater than 2TB. This update supports assigning a GPT disk (greater than or equal to 2TB) to a failover cluster using the Share and Storage Management MMC snap-in.
• KB974564 - Single Instance Storage (SIS) Update This update resolves the following issues with the SIS filter driver: The SIS filter incorrectly uses paged memory for copy-on-first-write requests and SI_COPY_THREAD_REQUEST.
SIS may corrupt link files that have data written beyond end-of-file (EOF). This update prevents the issue.
NOTE: SIS is only available on the Standard and Enterprise editions of the operating system. Only the necessary updates will be applied to the system.
Рекомендуется
Найдите наиболее подходящий файл для вашей системы
Введите сведения о вашем продукте, чтобы просмотреть актуальную информацию о драйверах для вашей системы
Поиск по поддержке
Введите сервисный код или модель Dell
Хотите найти свой продукт? Введите идентификатор продукта.Показать как
Результаты не найдены. По вашему запросу ничего найти не удалось. Измените критерии поиска и повторите попытку.
Этот драйвер несовместим
Этот драйвер неприменим к выбранному продукту. Выберите другой продукт, чтобы повторно ввести сведения для данного драйвера, или посетите страницу поддержки продукта, чтобы просмотреть все драйверы для другого продукта.
Войдите в систему Windows с правами администратора, чтобы использовать автоматическое сканирование. Если вы уже вошли в систему с правами администратора и видите это сообщение, перезагрузите компьютер.Вашей системой управляет ИТ-администратор, и возможности могут быть ограниченны.
Дополнительные обновления. Используйте SupportAssist для поиска всех последних обновлений драйверов для вашего устройства.
Исправления и улучшения
This contains Windows Storage Server 2008 Update 1 and Update 2 which consist of updates for the following issues:
• KB968675 - Storport Update This update prevents a memory leak that is caused by a temporary unit condition.
• KB970662 - Single Instance Storage (SIS) Update This update resolves the following issues with SIS: A memory leak can occur with Groveler.exe if a forced rescan is initiated. There can be timing issues in SIS copy-on-first-write operations. NTFS re-ordering might be incorrectly handled after a forced shutdown.
• KB971191 - SIS links that have file sizes less than 1KB get set to normal files after restoring SIS v1 data to a SIS v2 volume. This issue can occur when backing up and restoring SIS files (links) that have been truncated to a length less than or equal to 1 KB from a migrated Windows Storage Server 2003 R2 SIS-enabled volume to Windows Storage Server 2008.
• KB970658 – iSCSI initiator appears to fail on reconnection After a lost iSCSI initiator connection is recovered, the session state in iSCSI Initiator interface may continue to display "Reconnecting." This issue only applies to application servers connecting to Microsoft iSCSI Software Target using the iSCSI Initiator.
• KB971365 – Added support for GPT disks greater than 2TB. This update supports assigning a GPT disk (greater than or equal to 2TB) to a failover cluster using the Share and Storage Management MMC snap-in.
• KB974564 - Single Instance Storage (SIS) Update This update resolves the following issues with the SIS filter driver: The SIS filter incorrectly uses paged memory for copy-on-first-write requests and SI_COPY_THREAD_REQUEST.
SIS may corrupt link files that have data written beyond end-of-file (EOF). This update prevents the issue.
NOTE: SIS is only available on the Standard and Enterprise editions of the operating system. Only the necessary updates will be applied to the system.
Dell Technologies рекомендует применить данное обновление в ходе следующего планового цикла обновления. Обновление содержит изменения для поддержания общей работоспособности системы. Оно гарантирует, что системное ПО останется актуальным и совместимым с другими системными модулями (микропрограммой, BIOS, драйверами и программным обеспечением), а также может включать в себя другие новые функции.
Формат файла:Пакет обновлений для 32-разрядной версии MS Windows
Имя файла:APP_WIN_R255746.EXE
Размер файла:4.21 MB
Это большой файл. В зависимости от скорости подключения скачивание может занять некоторое время.
Описание формата:
Пакеты обновлений Dell (DUP) в 32-разрядном формате Microsoft Windows могут использоваться и с 64-разрядной операционной системой Microsoft Windows. Пакеты обновлений Dell (DUP) в 64-разрядном формате Microsoft Windows будут работать только с 64-разрядной операционной системой. При выборе обновления драйвера устройства необходимо выбрать тип, подходящий для вашей операционной системы.