AUTOMATISKT INSTALLERADDen här filen installerades automatiskt som en del av en ny uppdatering. Om du har problem kan du ladda ner och installera om den manuellt.
Innehållet på den här sidan kan ha översatts automatiskt. Fyll i formuläret längst ned på sidan för att ge feedback.
Den här filen installerades automatiskt som en del av en ny uppdatering. Om du har problem kan du ladda ner och installera om den manuellt.
Firmware DE13 fixes potential hang on power up on Seagate 3.5" 7200RPM HDD''s Model #''s:
ST3750630AS ST31000340AS
Rekommenderat
Hitta den bästa nerladdningen för ditt system
Ange din produktinformation för att se den senaste informationen om drivrutiner för ditt system
Sök efter support
Ange din Dell service tag eller modell
Vill du söka efter din produkt? Ange en produktidentifierare.Visa mig hur
Inga resultat hittades. Vi kunde inte hitta något som matchade din sökning. Ändra din sökning och försök igen.
Den här drivrutinen är inte kompatibel
Den här drivrutinen gäller inte för den valda produkten. Välj en annan produkt för att ange din produktinformation för den här drivrutinen igen eller gå till produktsupportsidan för att visa alla drivrutiner för en annan produkt.
Logga in på Windows som administratör för att använda automatisk skanning. Om du redan är inloggad som administratör och ser det här meddelandet ska du starta om.Ditt system hanteras av IT-administratören och funktionerna kan vara begränsade.
Hitta fler uppdateringar. Använd SupportAssist för att hitta alla de senaste drivrutinsuppdateringarna för din enhet.
Korrigeringar och förbättringar
The DE13 firmware corrects potential hang on power up. Drive will appear not accessible after hang.
Firmware DE13 fixes potential hang on power up on Seagate 3.5" 7200RPM HDD''s Model #''s:
Dell Technologies rekommenderar starkt att du installerar den här viktiga uppdateringen så snart som möjligt. Uppdateringen innehåller kritiska buggfixar och ändringar som förbättrar funktionaliteten, pålitligheten och stabiliteten i ditt Dell-system. Den kan även innehålla säkerhetskorrigeringar och andra funktionsförbättringar.
Det här är en stor fil. Beroende på din anslutningshastighet kan det ta lite tid att ladda ner den.
Formatbeskrivning:
Den här filen innehåller en komprimerad (eller zippad) uppsättning filer. Hämta filen till en mapp på hårddisken och kör sedan filen (dubbelklicka på den) för att packa upp filerna. Följ anvisningarna för att slutföra installationen.
Verifiera kontrollsummans värde så att hämtningen genomförs korrekt.
MD5:
ead5c107eded39e0fab3cc5b65c1d89f
SHA1:
Inte tillgänglig
SHA-256:
Inte tillgänglig
Filformat:En eller flera självuppackande diskimageuppsättningar inuti en självuppackande ZIP-fil
Filnamn:BR213714.exe
Filstorlek:1.03 MB
Det här är en stor fil. Beroende på din anslutningshastighet kan det ta lite tid att ladda ner den.
Formatbeskrivning:
Den här filen innehåller en komprimerad (eller zippad) uppsättning filer. Hämta filen till en mapp på hårddisken och dubbelklicka sedan på den för att packa upp filerna. Följ anvisningarna för att slutföra installationen.
* Please note that if your drive is connected to an add-in or onboard controller designated for SAS (Serial Attached SCSI) then you will need to connect your drives to the onboard SATA controller to perform the update. *
(PLEASE DON'T INTERRUPT THE FIRMWARE UPDATE PROCESS)
For Bootable Diskette:
1. Perform a full backup of your data. 2. Click on the (BR213714.EXE) file and select "RUN" then "RUN" again. 3. Choose "Continue" in the next window to create a bootable floppy. 4. Close all applications and restart system. 5. Press F12 and insert the floppy disk containing the firmware update. 6. Select boot from Floppy. 7. The Seagate Firmware Update will start automatically. 8. The utility will autoscan and update the appropiate Seagate ST3750630AS and ST31000340AS. 9. Once completed, a message indicating process completion will appear. 10. Remove the floppy diskette and power off your system. 11. Power on your system to continue normal operation. Custom Instructions for R213714.EXE:
* PLEASE PRINT THE FOLLOWING INSTRUCTIONS *
* Please note that if your drive is connected to an add-in or onboard controller designated for SAS (Serial Attached SCSI) then you will need to connect your drives to the onboard SATA controller to perform the update. *
(PLEASE DON'T INTERRUPT THE FIRMWARE UPDATE PROCESS)
For Bootable CD option
1. Perform a full backup of your data. 2. Click on the (R213714.EXE) file and select "RUN" then "RUN" again. 3. Press "Continue" then "OK" to extract the files to the provided location. 4. Refer to your CD burning application instructions to create a bootable CD using the provided file "C:\DELL\Drivers\R213714\CD Image\Seagate Utility.ISO". 5. Restart your system. 6. Press F12 and insert the CD containing the firmware update. 7. Select boot from CD/DVD. 8. The Seagate utility will start automatically. 9. The utility will autoscan and update the appropiate Seagate ST3750630AS and ST31000340AS. 10. Once completed, a message indicating process completion will appear. 11. Remove the CD and power off your PC. 12. Power on your PC to continue normal operation.
For Bootable USB key option
1. Perform a full backup of your data. 2. Click on the (R213714.EXE) file and select "RUN" then "RUN" again. 3. Press "Continue" then "OK" to extract the files to the provided location. 4. The files are located in "C:\DELL\Drivers\R213714\Files" directory. 5. Add the files to your bootable USB key. 6. Restart your system. 7. Insert your USB key containing the firmware update. 8. Press F12 and choose boot from USB 9. The Seagate utility will start automatically. 10. The utility will autoscan and update the appropiate Seagate ST3750630AS and ST31000340AS. 11. Once completed, a message indicating process completion will appear. 12. Remove the Bootable Media and power off your system.