AUTOMATISKT INSTALLERADDen här filen installerades automatiskt som en del av en ny uppdatering. Om du har problem kan du ladda ner och installera om den manuellt.
Innehållet på den här sidan kan ha översatts automatiskt. Fyll i formuläret längst ned på sidan för att ge feedback.
Den här filen installerades automatiskt som en del av en ny uppdatering. Om du har problem kan du ladda ner och installera om den manuellt.
Management information bases (MIBs) are a collection of definitions, which define the properties of the managed object within the device to be managed. Every managed device keeps a database of values for each of the definitions written in the MIB. It is not the actual database itself - it is implementation dependant. Definition of the MIB conforms to the SMI given in RFC 1155. Internet MIB is given in RFC 1213 sometimes called the MIB-II
Rekommenderat
Hitta den bästa nerladdningen för ditt system
Ange din produktinformation för att se den senaste informationen om drivrutiner för ditt system
Sök efter support
Ange din Dell service tag eller modell
Vill du söka efter din produkt? Ange en produktidentifierare.Visa mig hur
Inga resultat hittades. Vi kunde inte hitta något som matchade din sökning. Ändra din sökning och försök igen.
Den här drivrutinen är inte kompatibel
Den här drivrutinen gäller inte för den valda produkten. Välj en annan produkt för att ange din produktinformation för den här drivrutinen igen eller gå till produktsupportsidan för att visa alla drivrutiner för en annan produkt.
Logga in på Windows som administratör för att använda automatisk skanning. Om du redan är inloggad som administratör och ser det här meddelandet ska du starta om.Ditt system hanteras av IT-administratören och funktionerna kan vara begränsade.
Hitta fler uppdateringar. Använd SupportAssist för att hitta alla de senaste drivrutinsuppdateringarna för din enhet.
Korrigeringar och förbättringar
1. staPortProtocolMigration OBJECT-TYPE DESCRIPTION "When operating in RSTP (version 2) mode, writing TRUE(1)to this object forces this port to transmit RSTP BPDUs. Any other operation on this object has no effect and it always returns FALSE(2) when read."
2. staPortAdminEdgePort OBJECT-TYPE
DESCRIPTION "The administrative value of the Edge Port parameter. A value of TRUE(1) indicates that this port should be assumed as an edge-port and a value of FALSE(2) indicates that this port should be assumed as a non-edge-port."
3. staPortOperEdgePort OBJECT-TYPE DESCRIPTION "The operational value of the Edge Port parameter. The object is initialized to the value of staPortAdminEdgePort and is set FALSE when a BPDU is received."
4. staPortAdminPointToPoint OBJECT-TYPE DESCRIPTION "The administrative point-to- point status of the LAN segment attached to this port. A value of forceTrue (0) indicates that this port should always be treated as if it is connected to a point-to- point link. A value of forceFalse(1)indicates that this port should be treated as having a shared media connection. A value of auto(2) indicates that this port is considered to have a point-to-point link if it is an Aggregator and all of its members are aggregatable, or if the MAC entity is configured for full duplex operation, either Through auto-negotiation or by management means."
5. staPortOperPointToPoint OBJECT-TYPE DESCRIPTION "The operational point-to-point status of the LAN segment attached to this port. It indicates whether a port is considered to have a point-to-point connection or not. The value is determined by management or by auto-detection, as described in the staPortAdminPointToPoint object."
6. staPortLongPathCost OBJECT-TYPE DESCRIPTION "The contribution of this port to the path cost (in 32 bits value) of paths towards the spanning tree root which include this port.
This object is used to configure the spanning tree port path cost in 32 bits value range when the staPathCostMethod is long(2).
If the staPathCostMethod is short(1), this mib object is not instantiated."
7. staProtocolType OBJECT-TYPE DESCRIPTION "The version of Spanning Tree Protocol the bridge is currently running. The value 'stp(1)' indicates the Spanning Tree Protocol is as specified in IEEE 802.1D,'rstp(2)' indicates the Rapid Spanning Tree Protocol is as specified in IEEE 802.1w and the value 'mstp(3)' indicates the Multiple Spanning Tree Protocol is as specified in IEEE 802.1s. New values may be defined in the future as new or updated versions of the protocol become available."
8. staTxHoldCount OBJECT-TYPE DESCRIPTION "The value used by the Port Transmit state machine to limit the maximum transmission rate."
9. staPathCostMethod OBJECT-TYPE DESCRIPTION "Indicates the type of spanning tree path cost mode Configured on the switch. This mode applies to all instances of the Spanning tree protocol running on the switch. When the value of this MIB object is changed, the path cost of all ports will be reassigned to the default path cost values based on the new spanning tree path cost mode and the ports' speed. When the value of this MIB object is set to long(2), the staPortLongPathCost MIB object must be used to retrieve/configure the spanning tree port path cost as a 32 bit value. The set
Dell Technologies rekommenderar att du kontrollerar den här uppdateringen för att avgöra om den gäller ditt system. Uppdateringen innehåller ändringar som endast påverkar vissa konfigurationer eller ger nya funktioner som eventuellt kan gälla den aktuella miljön.
Det här är en stor fil. Beroende på din anslutningshastighet kan det ta lite tid att ladda ner den.
Formatbeskrivning:
Den här filen innehåller en komprimerad (eller zippad) uppsättning filer. Hämta filen till en mapp på hårddisken och kör sedan filen (dubbelklicka på den) för att packa upp filerna. Följ anvisningarna för att slutföra installationen.
Note: In order to execute this file, it must be downloaded to a system running Microsoft Windows with an unzip utility installed.
Download 1. Click the "Download Now" link to download the file. 2. If the Export Compliance Disclaimer window appears, click the "I agree" link to accept the agreement. 3. When the File Download window appears, click "Save" to save the file to your hard drive.
Extract Files 1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package 2. Click Continue. 3. Specify the location to upzip the files. 4. Click on the OK button to extract files. 5. After a few seconds a dialog box will appear that says that all files were successfully unzipped. Click OK to exit from the installer.
Installation 1. Click the Start button and then click Run. 2. Type C:\DELL\DRIVERS\R59398 in the Open textbox and then click OK. 3. Follow the on-screen installation instructions.
Behöver du hjälp med problem som rör nätverksanslutning?
Hitta en lösning i Dells manual för användning och felsökning av nätverk.