Dell Device Managers for EMC Visual SAN, v.4.0, A01
AUTOMATISKT INSTALLERAD Den här filen installerades automatiskt som en del av en ny uppdatering. Om du har problem kan du ladda ner och installera om den manuellt.Innehållet på den här sidan kan ha översatts automatiskt. Fyll i formuläret längst ned på sidan för att ge feedback.
Dell(TM) Device Managers is a plug-in for EMC(R) VisualSAN(R) 3.0.0, 3.0.0 SP1 and 4.0.0
This provides enhanced device support and integrates EMC VisualSAN management functionality with Dell hardware and software. Enhanced functionality for Dell devices includes the following features:
- Device Discovery for NAS and all Supported Dell PowerVault Tape devices
- Device Discovery for Cluster Node (For EMC VisualSAN 3.x only)
- Trap Handling and Reformatting
- Extended Device Properties and Dell Specific Attributes
- Enhanced System Status Reporting
This provides enhanced device support and integrates EMC VisualSAN management functionality with Dell hardware and software. Enhanced functionality for Dell devices includes the following features:
- Device Discovery for NAS and all Supported Dell PowerVault Tape devices
- Device Discovery for Cluster Node (For EMC VisualSAN 3.x only)
- Trap Handling and Reformatting
- Extended Device Properties and Dell Specific Attributes
- Enhanced System Status Reporting
Rekommenderat
Hitta den bästa nerladdningen för ditt system
Ange din produktinformation för att se den senaste informationen om drivrutiner för ditt systemSök efter support
Ange din Dell service tag eller modell
Vill du söka efter din produkt? Ange en produktidentifierare. Visa mig hur
Den här drivrutinen är inte kompatibel
Den här drivrutinen gäller inte för den valda produkten. Välj en annan produkt för att ange din produktinformation för den här drivrutinen igen eller gå till produktsupportsidan för att visa alla drivrutiner för en annan produkt.
Logga in på Windows som administratör för att använda automatisk skanning. Om du redan är inloggad som administratör och ser det här meddelandet ska du starta om. Ditt system hanteras av IT-administratören och funktionerna kan vara begränsade.
Hitta fler uppdateringar. Använd SupportAssist för att hitta alla de senaste drivrutinsuppdateringarna för din enhet.
Korrigeringar och förbättringar
Dell Device Managers Version 4.0 for EMC VisualSAN 3.0.0, 3.0.0 SP1 and 4.0.0
Läs merVersion
4.0, A01
Utgivningsdatum
19 mars 2004
Hämtningstyp
Program
Kategori
SAN-programvara
Prioritet
ValfriDell Technologies rekommenderar att du kontrollerar den här uppdateringen för att avgöra om den gäller ditt system. Uppdateringen innehåller ändringar som endast påverkar vissa konfigurationer eller ger nya funktioner som eventuellt kan gälla den aktuella miljön.
Tillgängliga format
Filformat: Extern ZipPack
Filnamn: R74063.EXE
Filstorlek: 3.36 MB
Det här är en stor fil. Beroende på din anslutningshastighet kan det ta lite tid att ladda ner den.
Formatbeskrivning:
Den här filen innehåller en komprimerad (eller zippad) uppsättning filer. Hämta filen till en mapp på hårddisken och kör sedan filen (dubbelklicka på den) för att packa upp filerna. Följ anvisningarna för att slutföra installationen.
Verifiera kontrollsummans värde så att hämtningen genomförs korrekt.
MD5:
Inte tillgänglig
SHA1:
Inte tillgänglig
SHA-256:
Inte tillgänglig
I och med att du hämtar accepterar du villkoren i Dells licensavtal för programvara. (på Engelska)
Operativsystem som stöds
Windows Server 2003
Windows 2000
Windows XP
Installationsanvisningar
Custom Instructions for R74063.EXE:
Overview
Dell™ Device Managers installation uses a self-extracting exe from which you will run setup.exe. This document provides instructions for downloading the file and installing the program.
--------------------------------------------------------------------------------
Download
1. Go to www.dell.com/emc/visualsan and click the link Download the Dell Device Managers Plug-In for EMC VisualSAN now.
2. Click the R74063.exe link.
3. When prompted, click Download Now.
4. If the Export Compliance Disclaimer window appears, click Yes, I Accept this Agreement.
5. When the File Download window appears, click Save or Save this program to disk and click OK.
6. When the Save In window appears, select Desktop from the Save In drop-down menu to download the file to your desktop.
7. If the Download Complete window appears, click Close.
The file icon appears on your desktop.
--------------------------------------------------------------------------------
Installation
1. Double-click the R74063.exe file on the desktop.
2. When the Self-Extracting window appears and prompts you to extract the file to c:\dell\drivers\R74063, write down the name of the path to where the file is extracted so that you can find the setup.exe file later.
3. Click OK.
4. After completing the file extraction, if the Self-Extractor window is still open, close it.
5. Click the Start button and then click Run.
6. Enter c:\dell\drivers\R74063 in the Open text box and then click OK.
7. When the Welcome screen appears, click OK to display the license agreement screen.
8. Read the license agreement, using the scroll bar or key to navigate and read the rest of the agreement, and click Yes to accept the agreement.
A message warns to close VisualSAN windows before proceeding with the installation.
9. Close any open VisualSAN windows, and then click OK to continue the installation
A screen appears providing two options: Management Station and Managed Node. You can find more information about the selected option on the top of the screen by clicking the Management Station option or the Managed Node option.
You can also view the release notes or installation guide by clicking the appropriate buttons. You can choose Cancel at any time to exit the installation.
10. Continue the installation. See "Management Station" or "Managed Node" for more information.
Management Station
-------------------------
1. During setup, choose Management Station and click Next to install the program on the EMC® VisualSAN® management station.
During the dependency check, if all the dependencies are met, a green check appears next to the component in the component list. If a red mark appears next to the component, follow the instructions in the result window to obtain more information about the failure and take necessary action before continuing with installation.
If necessary, click Back and take the necessary steps to satisfy all the dependencies and restart the installation.
2. Click Next to continue.
The installation result window displays messages if the installation was successful or if it failed.
Managed Node
------------------
Managed Node software components are only required to be installed on a host in the following scenarios:
Managed Node is zoned to a PowerVault 120T tape autoloader or PowerVault 130T tape library.
Managed Node is a cluster node (For EMC VisualSAN 3.x support only; not required for EMC VisualSAN 4.0.0).
Managed Node is zoned to a PowerVault 650F disk processor enclosure (DPE).
Managed Node has a QLA2200 host bus adapter (HBA).
Read the description for each component below to determine if you need to install that component on the managed node.
Components:
Cluster SNMP Agent (For EMC VisualSAN 3.x support only. Not required for EMC VisualSAN 4.0.0)
The Dell OpenManage Clust
Overview
Dell™ Device Managers installation uses a self-extracting exe from which you will run setup.exe. This document provides instructions for downloading the file and installing the program.
--------------------------------------------------------------------------------
Download
1. Go to www.dell.com/emc/visualsan and click the link Download the Dell Device Managers Plug-In for EMC VisualSAN now.
2. Click the R74063.exe link.
3. When prompted, click Download Now.
4. If the Export Compliance Disclaimer window appears, click Yes, I Accept this Agreement.
5. When the File Download window appears, click Save or Save this program to disk and click OK.
6. When the Save In window appears, select Desktop from the Save In drop-down menu to download the file to your desktop.
7. If the Download Complete window appears, click Close.
The file icon appears on your desktop.
--------------------------------------------------------------------------------
Installation
1. Double-click the R74063.exe file on the desktop.
2. When the Self-Extracting window appears and prompts you to extract the file to c:\dell\drivers\R74063, write down the name of the path to where the file is extracted so that you can find the setup.exe file later.
3. Click OK.
4. After completing the file extraction, if the Self-Extractor window is still open, close it.
5. Click the Start button and then click Run.
6. Enter c:\dell\drivers\R74063 in the Open text box and then click OK.
7. When the Welcome screen appears, click OK to display the license agreement screen.
8. Read the license agreement, using the scroll bar or
A message warns to close VisualSAN windows before proceeding with the installation.
9. Close any open VisualSAN windows, and then click OK to continue the installation
A screen appears providing two options: Management Station and Managed Node. You can find more information about the selected option on the top of the screen by clicking the Management Station option or the Managed Node option.
You can also view the release notes or installation guide by clicking the appropriate buttons. You can choose Cancel at any time to exit the installation.
10. Continue the installation. See "Management Station" or "Managed Node" for more information.
Management Station
-------------------------
1. During setup, choose Management Station and click Next to install the program on the EMC® VisualSAN® management station.
During the dependency check, if all the dependencies are met, a green check appears next to the component in the component list. If a red mark appears next to the component, follow the instructions in the result window to obtain more information about the failure and take necessary action before continuing with installation.
If necessary, click Back and take the necessary steps to satisfy all the dependencies and restart the installation.
2. Click Next to continue.
The installation result window displays messages if the installation was successful or if it failed.
Managed Node
------------------
Managed Node software components are only required to be installed on a host in the following scenarios:
Managed Node is zoned to a PowerVault 120T tape autoloader or PowerVault 130T tape library.
Managed Node is a cluster node (For EMC VisualSAN 3.x support only; not required for EMC VisualSAN 4.0.0).
Managed Node is zoned to a PowerVault 650F disk processor enclosure (DPE).
Managed Node has a QLA2200 host bus adapter (HBA).
Read the description for each component below to determine if you need to install that component on the managed node.
Components:
Cluster SNMP Agent (For EMC VisualSAN 3.x support only. Not required for EMC VisualSAN 4.0.0)
The Dell OpenManage Clust
Hjälp och självstudiekurser för drivrutiner
Fler hämtningar finns på Drivrutiner och hämtningsbara filer. Mer information om hur du använder sidan finns i Hjälp och anvisningar för drivrutiner