Dell PERC 5/i Adapter Firmware Update
AUTOMATISKT INSTALLERAD Den här filen installerades automatiskt som en del av en ny uppdatering. Om du har problem kan du ladda ner och installera om den manuellt.Innehållet på den här sidan kan ha översatts automatiskt. Fyll i formuläret längst ned på sidan för att ge feedback.
This package provides the Dell PERC 5/i Adapter Firmware Update and is supported on the Enterprise Servers and Powervault models that are running the following Operating System: NA.
Rekommenderat
Hitta den bästa nerladdningen för ditt system
Ange din produktinformation för att se den senaste informationen om drivrutiner för ditt systemSök efter support
Ange din Dell service tag eller modell
Vill du söka efter din produkt? Ange en produktidentifierare. Visa mig hur
Den här drivrutinen är inte kompatibel
Den här drivrutinen gäller inte för den valda produkten. Välj en annan produkt för att ange din produktinformation för den här drivrutinen igen eller gå till produktsupportsidan för att visa alla drivrutiner för en annan produkt.
Logga in på Windows som administratör för att använda automatisk skanning. Om du redan är inloggad som administratör och ser det här meddelandet ska du starta om. Ditt system hanteras av IT-administratören och funktionerna kan vara begränsade.
Hitta fler uppdateringar. Använd SupportAssist för att hitta alla de senaste drivrutinsuppdateringarna för din enhet.
Korrigeringar och förbättringar
Fixes
- DeviceType on the Device Manager display has been corrected to show the proper device type: RAID
- Disk Timeout has been increased from 60 seconds to 65 seconds to safely allow drives to complete recovery.
Enhancements
- Added a bus rescan after a logical volume are initialized to effectively remove stale data. This will allow the OS to invalidate its cache data.
Läs mer- DeviceType on the Device Manager display has been corrected to show the proper device type: RAID
- Disk Timeout has been increased from 60 seconds to 65 seconds to safely allow drives to complete recovery.
Enhancements
- Added a bus rescan after a logical volume are initialized to effectively remove stale data. This will allow the OS to invalidate its cache data.
Version
5.2.2-0072, A09
Utgivningsdatum
09 maj 2012
Hämtningstyp
Firmware
Kategori
SAS RAID
Prioritet
RekommenderasDell Technologies rekommenderar att du installerar den här uppdateringen under nästa schemalagda uppdateringscykel. Uppdateringen innehåller ändringar för att bibehålla det allmänna systemtillståndet. Den säkerställer att systemets programvara förblir aktuell och kompatibel med andra systemmoduler (fast programvara, BIOS, drivrutiner och programvara) och kan inkludera andra nya funktioner.
Tillgängliga format Visa viktig information
Filformat: Uppdateringspaket för Microsoft Windows (32-bitars)
Filnamn: SAS-RAID_Firmware_10DNJ_WN32_5.2.2-0072_A09.EXE
Filstorlek: 6.24 MB
Det här är en stor fil. Beroende på din anslutningshastighet kan det ta lite tid att ladda ner den.
Formatbeskrivning:
Dells uppdateringspaket (DUP) i Microsoft Windows 32-bitarsformat har utformats för att köras på 64-bitarsversioner av Microsoft Windows. Dells uppdateringspaket (DUP) i Microsoft Windows 64-bitarsformat kan endast köras på 64-bitarsversioner av Microsoft Windows. När du väljer en uppdatering av en enhetsdrivrutin bör du välja en som passar till ditt operativsystem.
Verifiera kontrollsummans värde så att hämtningen genomförs korrekt.
MD5:
b38627244896f9ec0c22b4c4255f9cba
SHA1:
ee612c6ba3e9917d2d58514f888ba4a713d968ec
SHA-256:
Inte tillgänglig
Filformat: En eller flera självuppackande diskimageuppsättningar inuti en självuppackande ZIP-fil
Filnamn: BR189331.exe
Filstorlek: 1.54 MB
Det här är en stor fil. Beroende på din anslutningshastighet kan det ta lite tid att ladda ner den.
Formatbeskrivning:
Den här filen innehåller en komprimerad (eller zippad) uppsättning filer. Hämta filen till en mapp på hårddisken och dubbelklicka sedan på den för att packa upp filerna. Följ anvisningarna för att slutföra installationen.
Verifiera kontrollsummans värde så att hämtningen genomförs korrekt.
MD5:
6ac7c139a3b6832f83df162a1079d38c
SHA1:
Inte tillgänglig
SHA-256:
Inte tillgänglig
Filformat: En GnuPG-fil som innehåller en kryptografisk signatur
Filnamn: SAS-RAID_Firmware_10DNJ_LN32_5.2.2-0072_A09.BIN.sign
Filstorlek: 194 Bytes
Det här är en stor fil. Beroende på din anslutningshastighet kan det ta lite tid att ladda ner den.
Formatbeskrivning:
GnuPG-signaturen för Red Hat Linux-uppdateringspaket kan användas för att autentisera Dells identitet i det korrelerade Red Hat Linux-uppdateringspaketet.
Verifiera kontrollsummans värde så att hämtningen genomförs korrekt.
MD5:
ef8ab60f2fdd1486c793796f5d13bd3c
SHA1:
e64239b4f43e682dd2ddbfb68f66c43989c71b7c
SHA-256:
Inte tillgänglig
Filformat: Extern ZipPack
Filnamn: DELL_PERC-5-I-ADAPTER_A09_R189331.exe
Filstorlek: 1.29 MB
Det här är en stor fil. Beroende på din anslutningshastighet kan det ta lite tid att ladda ner den.
Formatbeskrivning:
Den här filen innehåller en komprimerad (eller zippad) uppsättning filer. Hämta filen till en mapp på hårddisken och kör sedan filen (dubbelklicka på den) för att packa upp filerna. Följ anvisningarna för att slutföra installationen.
Verifiera kontrollsummans värde så att hämtningen genomförs korrekt.
MD5:
1465ae7c9e94bfcae536ec1d468303a8
SHA1:
d0afe4d46b4c695cebf0c3c896f2be223542695a
SHA-256:
Inte tillgänglig
Filformat: Extern versionsinformation
Filnamn: R189331.txt
Filstorlek: 13.54 KB
Det här är en stor fil. Beroende på din anslutningshastighet kan det ta lite tid att ladda ner den.
Formatbeskrivning:
Det här filformatet innehåller oformaterad text som kan visas med en vanlig textredigerare.
Verifiera kontrollsummans värde så att hämtningen genomförs korrekt.
MD5:
6db0e46508e97ee65ea117a7f85cd0d1
SHA1:
Inte tillgänglig
SHA-256:
Inte tillgänglig
Filformat: Uppdateringspaket för Red Hat Linux
Filnamn: SAS-RAID_Firmware_10DNJ_LN32_5.2.2-0072_A09.BIN
Filstorlek: 4.31 MB
Det här är en stor fil. Beroende på din anslutningshastighet kan det ta lite tid att ladda ner den.
Formatbeskrivning:
Dell Uppdateringspaket för Linux kan användas som en fristående applikation som säkerställer att specifika valideringskriterier uppfylls och sedan utför en uppdatering.
Obs! Uppdateringspaketen för Linux är öppen källkod. Mer information finns i Viktigt-filen Dell Uppdateringspaket för Linux.
Obs! Uppdateringspaketen för Linux är öppen källkod. Mer information finns i Viktigt-filen Dell Uppdateringspaket för Linux.
Verifiera kontrollsummans värde så att hämtningen genomförs korrekt.
MD5:
3e70db8f2b482562d37334d3db91f9e5
SHA1:
1389022e9c60ac3256b42cbe08e79ddc8cc8cc27
SHA-256:
Inte tillgänglig
I och med att du hämtar accepterar du villkoren i Dells licensavtal för programvara. (på Engelska)
Viktig information
1. All RAID volumes will be presented as write through (WT) to the operating system (Windows and linux) independent of the actual write cache policy of the virtual disk.The controller manages the data in cache independently of the OS and any applications.Please use OpenManage or the BIOS Configuration Utility to view and manage virtual disk cache settings.
2. When viewing SATA physical disk properties from Ctrl-R or other management applications, the Vendor Identification.
3. If all physical disks making up a virtual disk are removed from the system or enclosure, the RAID controller will delete the virtual disk. If the disks are later re-inserted, they will be marked foreign and can be imported using a management application.
4. If the cable connecting a PERC 5/E to an enclosure is removed, the RAID controller will immediately delete all virtual disks on that enclosure. To recover, power down the server and ensure all cables in the configuration are securely connected. When the server is powered on, the RAID controller will detect the disks as foreign and the configuration can be imported with a management application.
5. Physical disks determined to contain a foreign configuration are not available for configuration as a new dedicated or global hotspare, or as a member of a new virtual disk. The foreign configuration must be imported or cleared from the physical disk before it may be used as a hotspare or member of a virtual disk. Physical disks with a foreign configuration will not appear on the Create New VD screen in Ctrl-R.
6. Prior to performing a virtual disk migration, the source system must be powered off before removal of the physical disks to preserve the correct virtual disk state. This is not required for the target system and the physical disks may be inserted while the system is powered on or off.
7. This version of firmware will not ensure complete compatibility with an older version of the management application, OpenManage 5.0 or 5.1.OpenManage 5.2 or greater is recommended.
8. It is recommended that the customer upgrade the management application and device driver to the latest version available from Dell at the time of installation of this firmware.
9. The firmware restricts the importing of virtual disks that are undergoing RAID level migration or Capacity Expansion. Do not interrupt virtual disks that are performing either of these operations because it will disable the ability to import the virtual disk and the data will be unavailable. Dell recommends that the user perform a data backup before starting these operations.
10. Foreign dedicated hot spares are now imported as global hot spares.
11. Default Physical disk cache settings for hard drives are ON for SATA drives and OFF for SAS drives.
12. A EMM change or a drive migration is not a supported action during a Capacity Expansion or Raid Level Migration. This may cause the VDs to go offline.Dell recommends the user to take a data backup before starting these operations.
13. A Rebuild operation cannot be stopped/interrupted from the Ctrl+R configuration utility but can be done from the Dell Open Manage Storage Management Software.
2. When viewing SATA physical disk properties from Ctrl-R or other management applications, the Vendor Identification.
3. If all physical disks making up a virtual disk are removed from the system or enclosure, the RAID controller will delete the virtual disk. If the disks are later re-inserted, they will be marked foreign and can be imported using a management application.
4. If the cable connecting a PERC 5/E to an enclosure is removed, the RAID controller will immediately delete all virtual disks on that enclosure. To recover, power down the server and ensure all cables in the configuration are securely connected. When the server is powered on, the RAID controller will detect the disks as foreign and the configuration can be imported with a management application.
5. Physical disks determined to contain a foreign configuration are not available for configuration as a new dedicated or global hotspare, or as a member of a new virtual disk. The foreign configuration must be imported or cleared from the physical disk before it may be used as a hotspare or member of a virtual disk. Physical disks with a foreign configuration will not appear on the Create New VD screen in Ctrl-R.
6. Prior to performing a virtual disk migration, the source system must be powered off before removal of the physical disks to preserve the correct virtual disk state. This is not required for the target system and the physical disks may be inserted while the system is powered on or off.
7. This version of firmware will not ensure complete compatibility with an older version of the management application, OpenManage 5.0 or 5.1.OpenManage 5.2 or greater is recommended.
8. It is recommended that the customer upgrade the management application and device driver to the latest version available from Dell at the time of installation of this firmware.
9. The firmware restricts the importing of virtual disks that are undergoing RAID level migration or Capacity Expansion. Do not interrupt virtual disks that are performing either of these operations because it will disable the ability to import the virtual disk and the data will be unavailable. Dell recommends that the user perform a data backup before starting these operations.
10. Foreign dedicated hot spares are now imported as global hot spares.
11. Default Physical disk cache settings for hard drives are ON for SATA drives and OFF for SAS drives.
12. A EMM change or a drive migration is not a supported action during a Capacity Expansion or Raid Level Migration. This may cause the VDs to go offline.Dell recommends the user to take a data backup before starting these operations.
13. A Rebuild operation cannot be stopped/interrupted from the Ctrl+R configuration utility but can be done from the Dell Open Manage Storage Management Software.
Operativsystem som stöds
Ej tillämpligt
Gäller
�
PERC 5/i Adapter
Installationsanvisningar
2.0 Performing the Firmware Upgrade
===================================
Web pack:
---------
Download
1. Click Download Now, to download the file.
2. When the File Download window appears, click Save
this program to disk and click OK. The Save In: window appears.
3. From the "Save As" field, click the down arrow then click to
select Desktop and click Save. The file will download to your desktop.
4. If the Download Complete window appears, click Close. The file
icon appears on your desktop.
Hard Drive Floppy Disk Creation
1. Get 2 blank, formatted floppy disks.
2. Double-click the new icon (it looks like a floppy diskette) on
the desktop. The Self-Extractor window appears.
3. Click the 'Continue' button on the self-extractor window after inserting
one of the formatted floppies.
4. The utility prompts the user to insert the second floppy diskette after
it completes writing on the first floppy.
5. Remove the first floppy and insert the second floppy diskette.
6. Press 'Continue' button.
7. After all the files have been copied to the last floppy disk, press the 'Finish'
button to close the Self-Extracter window
Install
1. Insert the first (or the only) disk of the set into the Floppy
drive.
2. Click Start, click Shutdown, click Restart, and then click OK.
3. Follow the on-screen instructions.
Zip pack:
---------
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to
your hard drive.
Extract Files
1. Browse to the location where you downloaded the file and double-click the
new file to unzip the download package
2. Click Continue.
3. Specify the location to unzip the files.
4. Click on the OK button to extract files.
After the files are extracted the message all files were successfully
unzipped will appear.
5. Click the OK button to exit from the installer.
Installation
1. Copy extracted files to bootable media.
2. Reboot system to bootable media.
3. Execute update.bat to perform flash.
4. After flash is complete, remove bootable media.
5. Reboot system for changes to take effect.
Windows Update Package:
-----------------------
Download
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to
your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click
the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window
before proceeding.
4. Click the "Install" button.
5. Follow the remaining prompts to perform the update.
Linux Update Package:
---------------------
Download
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to
your hard drive.
Installation
1. Read over the release information presented by executing the
"./FRMW_LX_RXXXXXX.BIN --version" command from the shell.
2. Download and install any prerequisites identified in the above step before
proceeding.
3. Run the update by executing "./FRMW_LX_RXXXXXX.BIN" from the shell.
4. Follow the remaining prompts to perform the update.
GnuPG Signature of Dell Update Package Instructions for FRMW_LX_RXXXXXX.BIN:
----------------------------------------------------------------------------
Download
1. Click the "Download Now" link to download the file.
2. When the "File Download" window appears, click "Save" to save the file to
your hard drive.
Installation
1. Import the Dell public key. (You only need to do this once on your system.)
2. Verify the Dell Update Package by using its signature file,
FRMW_LX_RXXXXXX.BIN.
===================================
Web pack:
---------
Download
1. Click Download Now, to download the file.
2. When the File Download window appears, click Save
this program to disk and click OK. The Save In: window appears.
3. From the "Save As" field, click the down arrow then click to
select Desktop and click Save. The file will download to your desktop.
4. If the Download Complete window appears, click Close. The file
icon appears on your desktop.
Hard Drive Floppy Disk Creation
1. Get 2 blank, formatted floppy disks.
2. Double-click the new icon (it looks like a floppy diskette) on
the desktop. The Self-Extractor window appears.
3. Click the 'Continue' button on the self-extractor window after inserting
one of the formatted floppies.
4. The utility prompts the user to insert the second floppy diskette after
it completes writing on the first floppy.
5. Remove the first floppy and insert the second floppy diskette.
6. Press 'Continue' button.
7. After all the files have been copied to the last floppy disk, press the 'Finish'
button to close the Self-Extracter window
Install
1. Insert the first (or the only) disk of the set into the Floppy
drive.
2. Click Start, click Shutdown, click Restart, and then click OK.
3. Follow the on-screen instructions.
Zip pack:
---------
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to
your hard drive.
Extract Files
1. Browse to the location where you downloaded the file and double-click the
new file to unzip the download package
2. Click Continue.
3. Specify the location to unzip the files.
4. Click on the OK button to extract files.
After the files are extracted the message all files were successfully
unzipped will appear.
5. Click the OK button to exit from the installer.
Installation
1. Copy extracted files to bootable media.
2. Reboot system to bootable media.
3. Execute update.bat to perform flash.
4. After flash is complete, remove bootable media.
5. Reboot system for changes to take effect.
Windows Update Package:
-----------------------
Download
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to
your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click
the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window
before proceeding.
4. Click the "Install" button.
5. Follow the remaining prompts to perform the update.
Linux Update Package:
---------------------
Download
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to
your hard drive.
Installation
1. Read over the release information presented by executing the
"./FRMW_LX_RXXXXXX.BIN --version" command from the shell.
2. Download and install any prerequisites identified in the above step before
proceeding.
3. Run the update by executing "./FRMW_LX_RXXXXXX.BIN" from the shell.
4. Follow the remaining prompts to perform the update.
GnuPG Signature of Dell Update Package Instructions for FRMW_LX_RXXXXXX.BIN:
----------------------------------------------------------------------------
Download
1. Click the "Download Now" link to download the file.
2. When the "File Download" window appears, click "Save" to save the file to
your hard drive.
Installation
1. Import the Dell public key. (You only need to do this once on your system.)
2. Verify the Dell Update Package by using its signature file,
FRMW_LX_RXXXXXX.BIN.
Hjälp och självstudiekurser för drivrutiner
Fler hämtningar finns på Drivrutiner och hämtningsbara filer. Mer information om hur du använder sidan finns i Hjälp och anvisningar för drivrutiner