Delta 495W PSU (PN: N24MJ) Firmware Package
Omstart krävs AUTOMATISKT INSTALLERAD Den här filen installerades automatiskt som en del av en ny uppdatering. Om du har problem kan du ladda ner och installera om den manuellt.Innehållet på den här sidan kan ha översatts automatiskt. Fyll i formuläret längst ned på sidan för att ge feedback.
This package provides the new firmware for power supplier and is supported on Delta 495W PSU (PN: N24MJ) running on the Windows and Linux operating systems.
Rekommenderat
Hitta den bästa nerladdningen för ditt system
Ange din produktinformation för att se den senaste informationen om drivrutiner för ditt systemSök efter support
Ange din Dell service tag eller modell
Vill du söka efter din produkt? Ange en produktidentifierare. Visa mig hur
Den här drivrutinen är inte kompatibel
Den här drivrutinen gäller inte för den valda produkten. Välj en annan produkt för att ange din produktinformation för den här drivrutinen igen eller gå till produktsupportsidan för att visa alla drivrutiner för en annan produkt.
Logga in på Windows som administratör för att använda automatisk skanning. Om du redan är inloggad som administratör och ser det här meddelandet ska du starta om. Ditt system hanteras av IT-administratören och funktionerna kan vara begränsade.
Hitta fler uppdateringar. Använd SupportAssist för att hitta alla de senaste drivrutinsuppdateringarna för din enhet.
Korrigeringar och förbättringar
Initial Version
Läs merVersion
07.25.7D, A00-01
Utgivningsdatum
06 mars 2012
Hämtningstyp
Firmware
Kategori
Strömförsörjning
Prioritet
ValfriDell Technologies rekommenderar att du kontrollerar den här uppdateringen för att avgöra om den gäller ditt system. Uppdateringen innehåller ändringar som endast påverkar vissa konfigurationer eller ger nya funktioner som eventuellt kan gälla den aktuella miljön.
Tillgängliga format Visa viktig information
Filformat: Uppdateringspaket för Microsoft Windows (32-bitars)
Filnamn: Power_Firmware_3DY53_WN32_07.25.7D_A00-01.EXE
Filstorlek: 4.36 MB
Det här är en stor fil. Beroende på din anslutningshastighet kan det ta lite tid att ladda ner den.
Formatbeskrivning:
Dells uppdateringspaket (DUP) i Microsoft Windows 32-bitarsformat har utformats för att köras på 64-bitarsversioner av Microsoft Windows. Dells uppdateringspaket (DUP) i Microsoft Windows 64-bitarsformat kan endast köras på 64-bitarsversioner av Microsoft Windows. När du väljer en uppdatering av en enhetsdrivrutin bör du välja en som passar till ditt operativsystem.
Verifiera kontrollsummans värde så att hämtningen genomförs korrekt.
MD5:
32c85565f25d579d18be14d3f0f9916c
SHA1:
252e35cb42cb5856d3a24f73280a6d2ec0eaa56a
SHA-256:
43cf65fb94f22997bf8b2bdff50fd96bb12a4484cc620a6b1a3605931714287f
Filformat: En GnuPG-fil som innehåller en kryptografisk signatur
Filnamn: Power_Firmware_3DY53_LN32_07.25.7D_A00-01.BIN.sign
Filstorlek: 194 Bytes
Det här är en stor fil. Beroende på din anslutningshastighet kan det ta lite tid att ladda ner den.
Formatbeskrivning:
GnuPG-signaturen för Red Hat Linux-uppdateringspaket kan användas för att autentisera Dells identitet i det korrelerade Red Hat Linux-uppdateringspaketet.
Verifiera kontrollsummans värde så att hämtningen genomförs korrekt.
MD5:
21229c079f5506f50011ba51d954d623
SHA1:
7baca3c6d748b075f1862e1ee7ce9e399ab15416
SHA-256:
58db6e9b69ba2647cf5ce3f6a93a518c29800d8669016a04967052bfa8bef52d
Filformat: Uppdateringspaket för Red Hat Linux
Filnamn: Power_Firmware_3DY53_LN32_07.25.7D_A00-01.BIN
Filstorlek: 2.16 MB
Det här är en stor fil. Beroende på din anslutningshastighet kan det ta lite tid att ladda ner den.
Formatbeskrivning:
Dell Uppdateringspaket för Linux kan användas som en fristående applikation som säkerställer att specifika valideringskriterier uppfylls och sedan utför en uppdatering.
Obs! Uppdateringspaketen för Linux är öppen källkod. Mer information finns i Viktigt-filen Dell Uppdateringspaket för Linux.
Obs! Uppdateringspaketen för Linux är öppen källkod. Mer information finns i Viktigt-filen Dell Uppdateringspaket för Linux.
Verifiera kontrollsummans värde så att hämtningen genomförs korrekt.
MD5:
45324ae6ae6b746cdddb10d45e94eb71
SHA1:
15b52ebd0c35a08346060a246343fccd0fa8d4c5
SHA-256:
09c5f57ca704e5aeef7cda86fb6137a1ac342e129003120e8da69f589b4c7abe
I och med att du hämtar accepterar du villkoren i Dells licensavtal för programvara. (på Engelska)
Viktig information
IMPORTANT: After a successful power supply firmware download, the managed system turns off for a duration ranging from three to ten minutes to continue updating the firmware. Once the firmware update is complete, the managed system reboots automatically.
CAUTION! Performing an AC power cycle or cold boot during a power supply firmware update, forces the power supply unit into an irrecoverable state and the managed system does not boot.
CAUTION! Performing an AC power cycle or cold boot during a power supply firmware update, forces the power supply unit into an irrecoverable state and the managed system does not boot.
Operativsystem som stöds
Ej tillämpligt
Gäller
ASSY,PWR SPLY,495W,RDNT,DELTA
Delta 495W PSU (PN: N24MJ)
Installationsanvisningar
PSU FIRMWARE UPDATE INSTRUCTIONS:
CAUTION: Performing an AC power cycle or cold boot during a power supply firmware update, forces the power supply unit (PSU) into an irrecoverable state and the managed system does not boot.
IMPORTANT:
After a successful power supply firmware download, the managed system turns off for a duration ranging from three to twenty minutes to continue updating the firmware. It is imperative not to interrupt/restart manually during this time. Update time can vary but should be approximately 10 minutes. Margin should be added to assure the Dell Update Package (DUP) is not interrupted (some DUPs may take up to 20 minutes). Once the firmware update is complete, the managed system reboots automatically.
Instructions for ".BIN" File:
Download
1. Click the Download Now link to download the file.
2. When the "File Download" window appears, click Save to save the file to your hard drive.
Installation
1. Read the release information presented by executing the ".BIN" file with "--version" command from the shell.
2. Download and install any prerequisites identified in the above step before proceeding.
3. Run the update by executing ".BIN " file from the shell.
4. Follow the remaining prompts to perform the update.
5. Upon successful completion the DUP will prompt to reboot system.
6. Restart your system.
After the system restarts, DUP will enter USC to complete the flashing of the PSU firmware.
7. The actual flash begins after DUP exits USC. Please do not power off or power cycle the system as this can result in a non-functional power supply.
8. Once the flashing process is complete the system should power back up and boot to OS.
Instructions for ".EXE" File:
Download
1. Click the "Download Now" link to download the file.
2. When the "File Download" window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.
6. Upon successful completion the DUP will prompt to reboot system.
7. Restart your system.
After the system restarts, DUP will enter USC to complete the flashing of the PSU firmware.
8. The actual flash begins after DUP exits USC. Please do not power off or power cycle the system as this can result in a non-functional power supply.
9. Once the flashing process is complete the system should power back up and boot to OS.
GnuPG Signature of Dell Update Package Instructions for ".sign" File:
Download
1. Click the "Download Now" link to download the file.
2. When the "File Download" window appears, click "Save" to save the file to your hard drive.
Installation
1. Import the Dell public key. (You only need to import once on your system.)
2. Verify the Dell Update Package by using its signature file.
3. Upon successful completion the DUP will prompt to reboot system.
4. Restart your system.
After the system restarts, DUP will enter USC to complete the flashing of the PSU firmware.
5. The actual flash begins after DUP exits USC. Please do not power off or power cycle the system as this can result in a non-functional power supply.
6. Once the flashing process is complete the system should power back up and boot to OS.
CAUTION: Performing an AC power cycle or cold boot during a power supply firmware update, forces the power supply unit (PSU) into an irrecoverable state and the managed system does not boot.
IMPORTANT:
After a successful power supply firmware download, the managed system turns off for a duration ranging from three to twenty minutes to continue updating the firmware. It is imperative not to interrupt/restart manually during this time. Update time can vary but should be approximately 10 minutes. Margin should be added to assure the Dell Update Package (DUP) is not interrupted (some DUPs may take up to 20 minutes). Once the firmware update is complete, the managed system reboots automatically.
Instructions for ".BIN" File:
Download
1. Click the Download Now link to download the file.
2. When the "File Download" window appears, click Save to save the file to your hard drive.
Installation
1. Read the release information presented by executing the ".BIN" file with "--version" command from the shell.
2. Download and install any prerequisites identified in the above step before proceeding.
3. Run the update by executing ".BIN " file from the shell.
4. Follow the remaining prompts to perform the update.
5. Upon successful completion the DUP will prompt to reboot system.
6. Restart your system.
After the system restarts, DUP will enter USC to complete the flashing of the PSU firmware.
7. The actual flash begins after DUP exits USC. Please do not power off or power cycle the system as this can result in a non-functional power supply.
8. Once the flashing process is complete the system should power back up and boot to OS.
Instructions for ".EXE" File:
Download
1. Click the "Download Now" link to download the file.
2. When the "File Download" window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.
6. Upon successful completion the DUP will prompt to reboot system.
7. Restart your system.
After the system restarts, DUP will enter USC to complete the flashing of the PSU firmware.
8. The actual flash begins after DUP exits USC. Please do not power off or power cycle the system as this can result in a non-functional power supply.
9. Once the flashing process is complete the system should power back up and boot to OS.
GnuPG Signature of Dell Update Package Instructions for ".sign" File:
Download
1. Click the "Download Now" link to download the file.
2. When the "File Download" window appears, click "Save" to save the file to your hard drive.
Installation
1. Import the Dell public key. (You only need to import once on your system.)
2. Verify the Dell Update Package by using its signature file.
3. Upon successful completion the DUP will prompt to reboot system.
4. Restart your system.
After the system restarts, DUP will enter USC to complete the flashing of the PSU firmware.
5. The actual flash begins after DUP exits USC. Please do not power off or power cycle the system as this can result in a non-functional power supply.
6. Once the flashing process is complete the system should power back up and boot to OS.
Hjälp och självstudiekurser för drivrutiner
Fler hämtningar finns på Drivrutiner och hämtningsbara filer. Mer information om hur du använder sidan finns i Hjälp och anvisningar för drivrutiner