Adaptec CERC SATA 2s, v.6.0.50.5, A06
AUTOMATISKT INSTALLERAD Den här filen installerades automatiskt som en del av en ny uppdatering. Om du har problem kan du ladda ner och installera om den manuellt.Innehållet på den här sidan kan ha översatts automatiskt. Fyll i formuläret längst ned på sidan för att ge feedback.
Dell CERC SATA 1.5/2s RAID Controller Device Driver for Windows Server 2000 and Windows Server 2003 (32-bit).
Rekommenderat
Hitta den bästa nerladdningen för ditt system
Ange din produktinformation för att se den senaste informationen om drivrutiner för ditt systemSök efter support
Ange din Dell service tag eller modell
Vill du söka efter din produkt? Ange en produktidentifierare. Visa mig hur
Den här drivrutinen är inte kompatibel
Den här drivrutinen gäller inte för den valda produkten. Välj en annan produkt för att ange din produktinformation för den här drivrutinen igen eller gå till produktsupportsidan för att visa alla drivrutiner för en annan produkt.
Logga in på Windows som administratör för att använda automatisk skanning. Om du redan är inloggad som administratör och ser det här meddelandet ska du starta om. Ditt system hanteras av IT-administratören och funktionerna kan vara begränsade.
Hitta fler uppdateringar. Använd SupportAssist för att hitta alla de senaste drivrutinsuppdateringarna för din enhet.
Korrigeringar och förbättringar
- corrects potential I/O performance issues on RAID 1 arrays in cases where a failed hard drive has not yet been removed from or replaced in the system.
- corrects potential system hang condition in cases when a failed hard drive has not been removed from the system
- corrects a potential issue caused by a variable not being cleared properly.
- corrects an issue seen with management software when retrieving serial numbers from hard disks.
- corrects an issue where certain error conditions were not returning sense data per SATA specification.
Läs mer- corrects potential system hang condition in cases when a failed hard drive has not been removed from the system
- corrects a potential issue caused by a variable not being cleared properly.
- corrects an issue seen with management software when retrieving serial numbers from hard disks.
- corrects an issue where certain error conditions were not returning sense data per SATA specification.
Version
6.0.50.5, A06
Utgivningsdatum
11 sep. 2006
Hämtningstyp
Drivrutin
Kategori
Lagring
Prioritet
RekommenderasDell Technologies rekommenderar att du installerar den här uppdateringen under nästa schemalagda uppdateringscykel. Uppdateringen innehåller ändringar för att bibehålla det allmänna systemtillståndet. Den säkerställer att systemets programvara förblir aktuell och kompatibel med andra systemmoduler (fast programvara, BIOS, drivrutiner och programvara) och kan inkludera andra nya funktioner.
Tillgängliga format Visa viktig information
Filformat: Uppdateringspaket för Microsoft Windows (32-bitars)
Filnamn: DRVR_WIN_R126743.EXE
Filstorlek: 5.01 MB
Det här är en stor fil. Beroende på din anslutningshastighet kan det ta lite tid att ladda ner den.
Formatbeskrivning:
Dells uppdateringspaket (DUP) i Microsoft Windows 32-bitarsformat har utformats för att köras på 64-bitarsversioner av Microsoft Windows. Dells uppdateringspaket (DUP) i Microsoft Windows 64-bitarsformat kan endast köras på 64-bitarsversioner av Microsoft Windows. När du väljer en uppdatering av en enhetsdrivrutin bör du välja en som passar till ditt operativsystem.
Verifiera kontrollsummans värde så att hämtningen genomförs korrekt.
MD5:
D2DBA12978EFD78B2F6CF9E47BAC762C
SHA1:
Inte tillgänglig
SHA-256:
Inte tillgänglig
Filformat: Extern ZipPack
Filnamn: R126743.EXE
Filstorlek: 250.66 KB
Det här är en stor fil. Beroende på din anslutningshastighet kan det ta lite tid att ladda ner den.
Formatbeskrivning:
Den här filen innehåller en komprimerad (eller zippad) uppsättning filer. Hämta filen till en mapp på hårddisken och kör sedan filen (dubbelklicka på den) för att packa upp filerna. Följ anvisningarna för att slutföra installationen.
Verifiera kontrollsummans värde så att hämtningen genomförs korrekt.
MD5:
d1aef73ede1e93a0f934e3124ae93474
SHA1:
Inte tillgänglig
SHA-256:
Inte tillgänglig
I och med att du hämtar accepterar du villkoren i Dells licensavtal för programvara. (på Engelska)
Viktig information
Known Limitations:
1. If using the CERC SATA 1.5/2s to create 2 single disk volumes, when formatting both disks, Dell strongly advises against attempting to delete one of the disk volumes. This could result in a system lock up and require the user to reboot the system to recover.
1. If using the CERC SATA 1.5/2s to create 2 single disk volumes, when formatting both disks, Dell strongly advises against attempting to delete one of the disk volumes. This could result in a system lock up and require the user to reboot the system to recover.
Operativsystem som stöds
Windows Server 2003
Windows 2000
Installationsanvisningar
Dell Update Package Instructions for DRVR_WIN_R126743.EXE:
Download
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Install any necessary Embedded Systems Management firmware prior to this BIOS update.
5. Click the Install button.
6. Follow the remaining prompts to perform the update.
Instructions for R126743.EXE
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Extract Files
1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package
2. Click Continue.
3. Specify the location to unzip the files.
4. Click on the OK button to extract files.
After the files are extracted the message all files were successfully unzipped will appear.
5. Click the OK button to exit from the installer.
Install
A. New OS Installation
1. Unzip files to a blank floppy disk --
2. Start installing OS.
3. Press F6 when a message appears requesting you to press F6 if you need to install third party SCSI or RAID drivers.
4. When the Windows Setup window is displayed, Press S to specify additional device(s).
5. Insert the driver diskette and press ENTER.
6. The Windows Setup screen displays a message indicating that Setup will load support for the requested storage devices.
7. If there are any additional devices to be installed, specify them now by pressing S and providing the driver diskettes for them as prompted.
8. When all devices are specified, continue to the next step by pressing ENTER.
B. Driver Update Installation
Windows XP/Server 2003 Driver Update
1. Open "Device Manager".
2. Open "SCSI and RAID Controllers".
3. Select "Adaptec Embedded Serial ATA HostRAID Controller" .
4. Select the "Driver" tab.
5. Click on "Update Driver".
6. If asked whether to allow Windows to connect to Windows Update, choose "No, not this time" and click "Next". Otherwise, skip to next step.
7. Choose "Install from a list of specific location (Advanced)", and click "Next".
8. Check "Include this location in the search:".
9. Enter the locations (hard drive or floppy) where you saved extracted files and click "Next".
10. Click "Finish".
11. If prompted to reboot to complete update, do so.
Windows Server 2000 Driver Update
1. Open "Device Manager".
2. Open "SCSI and RAID Controllers".
3. Open "Adaptec Embedded Serial ATA HostRAID Controller".
4. Select the "Driver" tab.
5. Click on "Update Driver", then click next at the Driver Wizard welcome screen.
6. Select “Display a list of the known drivers for this device so that I can choose a specific driver”, then click next.
8. Click “Have Disk…”.
9. Enter the locations (hard drive or floppy) where you saved extracted files and click OK.
10. The located driver will be displayed on the, “Select a Device Driver “ page. Select the driver and then click next.
11. Click next on the, “Start Device Driver Installation” page.
12. Click “Finish”.
13. When prompted to restart the computer, click “Yes” to restart immediately (recommended) or click “No” to postpone the restart if necessary.
Known Limitations:
1. If using the CERC SATA 1.5/2s to create 2 single disk volumes, when formatting both disks, Dell strongly advises against attempting to delete one of the disk volumes. This could result in a system lock up and require the user to reboot the system to recover.
Download
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Install any necessary Embedded Systems Management firmware prior to this BIOS update.
5. Click the Install button.
6. Follow the remaining prompts to perform the update.
Instructions for R126743.EXE
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Extract Files
1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package
2. Click Continue.
3. Specify the location to unzip the files.
4. Click on the OK button to extract files.
After the files are extracted the message all files were successfully unzipped will appear.
5. Click the OK button to exit from the installer.
Install
A. New OS Installation
1. Unzip files to a blank floppy disk --
2. Start installing OS.
3. Press F6 when a message appears requesting you to press F6 if you need to install third party SCSI or RAID drivers.
4. When the Windows Setup window is displayed, Press S to specify additional device(s).
5. Insert the driver diskette and press ENTER.
6. The Windows Setup screen displays a message indicating that Setup will load support for the requested storage devices.
7. If there are any additional devices to be installed, specify them now by pressing S and providing the driver diskettes for them as prompted.
8. When all devices are specified, continue to the next step by pressing ENTER.
B. Driver Update Installation
Windows XP/Server 2003 Driver Update
1. Open "Device Manager".
2. Open "SCSI and RAID Controllers".
3. Select "Adaptec Embedded Serial ATA HostRAID Controller" .
4. Select the "Driver" tab.
5. Click on "Update Driver".
6. If asked whether to allow Windows to connect to Windows Update, choose "No, not this time" and click "Next". Otherwise, skip to next step.
7. Choose "Install from a list of specific location (Advanced)", and click "Next".
8. Check "Include this location in the search:".
9. Enter the locations (hard drive or floppy) where you saved extracted files and click "Next".
10. Click "Finish".
11. If prompted to reboot to complete update, do so.
Windows Server 2000 Driver Update
1. Open "Device Manager".
2. Open "SCSI and RAID Controllers".
3. Open "Adaptec Embedded Serial ATA HostRAID Controller".
4. Select the "Driver" tab.
5. Click on "Update Driver", then click next at the Driver Wizard welcome screen.
6. Select “Display a list of the known drivers for this device so that I can choose a specific driver”, then click next.
8. Click “Have Disk…”.
9. Enter the locations (hard drive or floppy) where you saved extracted files and click OK.
10. The located driver will be displayed on the, “Select a Device Driver “ page. Select the driver and then click next.
11. Click next on the, “Start Device Driver Installation” page.
12. Click “Finish”.
13. When prompted to restart the computer, click “Yes” to restart immediately (recommended) or click “No” to postpone the restart if necessary.
Known Limitations:
1. If using the CERC SATA 1.5/2s to create 2 single disk volumes, when formatting both disks, Dell strongly advises against attempting to delete one of the disk volumes. This could result in a system lock up and require the user to reboot the system to recover.
Hjälp och självstudiekurser för drivrutiner
Fler hämtningar finns på Drivrutiner och hämtningsbara filer. Mer information om hur du använder sidan finns i Hjälp och anvisningar för drivrutiner