Dell 6Gb 8-port SAS Daughter Card, v.2.00.20, A00
AUTOMATISKT INSTALLERAD Den här filen installerades automatiskt som en del av en ny uppdatering. Om du har problem kan du ladda ner och installera om den manuellt.Innehållet på den här sidan kan ha översatts automatiskt. Fyll i formuläret längst ned på sidan för att ge feedback.
Quanta LSI 6Gb 8-port SAS daughter card Driver for Win2K8
Rekommenderat
Hitta den bästa nerladdningen för ditt system
Ange din produktinformation för att se den senaste informationen om drivrutiner för ditt systemSök efter support
Ange din Dell service tag eller modell
Vill du söka efter din produkt? Ange en produktidentifierare. Visa mig hur
Den här drivrutinen är inte kompatibel
Den här drivrutinen gäller inte för den valda produkten. Välj en annan produkt för att ange din produktinformation för den här drivrutinen igen eller gå till produktsupportsidan för att visa alla drivrutiner för en annan produkt.
Logga in på Windows som administratör för att använda automatisk skanning. Om du redan är inloggad som administratör och ser det här meddelandet ska du starta om. Ditt system hanteras av IT-administratören och funktionerna kan vara begränsade.
Hitta fler uppdateringar. Använd SupportAssist för att hitta alla de senaste drivrutinsuppdateringarna för din enhet.
Korrigeringar och förbättringar
Initial Release
Läs merVersion
2.00.20, A00
Utgivningsdatum
24 aug. 2010
Hämtningstyp
Drivrutin
Kategori
SAS RAID
Prioritet
RekommenderasDell Technologies rekommenderar att du installerar den här uppdateringen under nästa schemalagda uppdateringscykel. Uppdateringen innehåller ändringar för att bibehålla det allmänna systemtillståndet. Den säkerställer att systemets programvara förblir aktuell och kompatibel med andra systemmoduler (fast programvara, BIOS, drivrutiner och programvara) och kan inkludera andra nya funktioner.
Tillgängliga format
Filformat: Extern ZipPack
Filnamn: R275366lsi_sas2_srv08_x64_rel.zip
Filstorlek: 207.89 KB
Det här är en stor fil. Beroende på din anslutningshastighet kan det ta lite tid att ladda ner den.
Formatbeskrivning:
Den här filen innehåller en komprimerad (eller zippad) uppsättning filer. Hämta filen till en mapp på hårddisken och kör sedan filen (dubbelklicka på den) för att packa upp filerna. Följ anvisningarna för att slutföra installationen.
Verifiera kontrollsummans värde så att hämtningen genomförs korrekt.
MD5:
6995b8c3f78597813bc5b95778ee6d63
SHA1:
Inte tillgänglig
SHA-256:
Inte tillgänglig
I och med att du hämtar accepterar du villkoren i Dells licensavtal för programvara. (på Engelska)
Installationsanvisningar
Custom Instructions for R275366lsi_sas2_srv08_x64_rel.zip:
Installation Guide for the LSI Fusion-MPT (TM) Drivers:
LSI_SAS2.SYS (StorPort) V2.00.20
This file describes the features and use of the LSI Fusion-MPT SAS (Serial
Attached SCSI) Gen 2device drivers for the Windows Server 2008 operating
system environment. It is divided into the following sections:
Introduction for Windows Server 2008
Features
LSI Devices Supported
Description
Installing the Driver(s)
New System Installation
DVD-ROM Installation
Existing System Installation
Performance Tuning for Windows Server 2008
Miniport Driver Configuration Options and WDCFG Utility
WinPE Installation
Troubleshooting
.........................................................................
1.0 Introduction for Windows Server 2008
Windows Server 2008 is an operating system designed to run on Intel
architecture (x86, 32-bit), Itanium Processor Family (IA64), and Extended-64
(x64, AMD64/EM64T) processors using current technology. It provides a graphical
user interface environment incorporating many high-level features. Refer to the
Microsoft Windows Server 2008 documentation for details.
An I/O manager handles I/O requests in Windows Server 2008. To address a
peripheral, the I/O manager goes through the appropriate drivers. Windows
Server 2008 provides class drivers for hard disk, optical, CD-ROM, printer,
and scanner peripherals. Other class drivers, provided by peripheral
manufacturers, may be added to support new devices. Tape device support is
built into the operating system itself and does not require a class driver.
Microsoft provides the port driver and LSI Corporation provides the miniport
driver, which is called LSI_SAS2.SYS. This driver completes the path to the
LSI controller or processor with an optional SAS BIOS.
This miniport driver uses the Microsoft StorPort port driver (rather than
the Microsoft ScsiPort driver in earlier versions of Windows). The StorPort
driver has architectural enhancements that provide performance improvements on
large server systems with many storage adapters. This miniport driver is
designed to take advantage of these enhancements for improved performance.
.........................................................................
1.1 Features
The LSI_SAS2.SYS miniport driver supports these features:
o Supports End-to-End Data Protection (EEDP)
o Supports 1.5Gb, 3Gb, and 6Gb SAS expanders/devices and SATA devices
o Supports PCI-Express bus protocols
o Supports MSI/MSI-X
o Supports LSI Fusion-MPT common software interface
o Supports multiple host adapters
o Supports multiple Logical Unit Numbers (LUNs)
o Supports Scatter-Gather
o Supports SCSI pass-through functionality
o Supports disk array configurations with no LUN 0
o Supports disk array configurations with non-contiguous LUNs
o Auto request sense
o Maximum block size support: 1 Mbyte (32-bit), 2 Mbyte (64-bit)
.........................................................................
1.2 LSI Devices Supported
o LSISAS2004
o LSISAS2008
o LSISAS2108
o LSISAS2116
o LSISAS2208
o LSISAS2302
.........................................................................
1.3 Description
The LSI_SAS2.SYS driver meets the Microsoft specification for miniport
drivers. This driver allows connection of SAS devices including disk drives,
CD/DVD-ROMs, and tape drives for PCI-Express based machines. To support a
different SAS device type, the Windows Server 2008 architecture requires that
a class driver for that type of device be present (usually supplied by
Microsoft, or possibly by the peripheral manufacturer). No changes to the LSI
driver is required. The driver supports only Windows Server 2008 and all
subsequent Service Packs.
A Windows
Installation Guide for the LSI Fusion-MPT (TM) Drivers:
LSI_SAS2.SYS (StorPort) V2.00.20
This file describes the features and use of the LSI Fusion-MPT SAS (Serial
Attached SCSI) Gen 2device drivers for the Windows Server 2008 operating
system environment. It is divided into the following sections:
Introduction for Windows Server 2008
Features
LSI Devices Supported
Description
Installing the Driver(s)
New System Installation
DVD-ROM Installation
Existing System Installation
Performance Tuning for Windows Server 2008
Miniport Driver Configuration Options and WDCFG Utility
WinPE Installation
Troubleshooting
.........................................................................
1.0 Introduction for Windows Server 2008
Windows Server 2008 is an operating system designed to run on Intel
architecture (x86, 32-bit), Itanium Processor Family (IA64), and Extended-64
(x64, AMD64/EM64T) processors using current technology. It provides a graphical
user interface environment incorporating many high-level features. Refer to the
Microsoft Windows Server 2008 documentation for details.
An I/O manager handles I/O requests in Windows Server 2008. To address a
peripheral, the I/O manager goes through the appropriate drivers. Windows
Server 2008 provides class drivers for hard disk, optical, CD-ROM, printer,
and scanner peripherals. Other class drivers, provided by peripheral
manufacturers, may be added to support new devices. Tape device support is
built into the operating system itself and does not require a class driver.
Microsoft provides the port driver and LSI Corporation provides the miniport
driver, which is called LSI_SAS2.SYS. This driver completes the path to the
LSI controller or processor with an optional SAS BIOS.
This miniport driver uses the Microsoft StorPort port driver (rather than
the Microsoft ScsiPort driver in earlier versions of Windows). The StorPort
driver has architectural enhancements that provide performance improvements on
large server systems with many storage adapters. This miniport driver is
designed to take advantage of these enhancements for improved performance.
.........................................................................
1.1 Features
The LSI_SAS2.SYS miniport driver supports these features:
o Supports End-to-End Data Protection (EEDP)
o Supports 1.5Gb, 3Gb, and 6Gb SAS expanders/devices and SATA devices
o Supports PCI-Express bus protocols
o Supports MSI/MSI-X
o Supports LSI Fusion-MPT common software interface
o Supports multiple host adapters
o Supports multiple Logical Unit Numbers (LUNs)
o Supports Scatter-Gather
o Supports SCSI pass-through functionality
o Supports disk array configurations with no LUN 0
o Supports disk array configurations with non-contiguous LUNs
o Auto request sense
o Maximum block size support: 1 Mbyte (32-bit), 2 Mbyte (64-bit)
.........................................................................
1.2 LSI Devices Supported
o LSISAS2004
o LSISAS2008
o LSISAS2108
o LSISAS2116
o LSISAS2208
o LSISAS2302
.........................................................................
1.3 Description
The LSI_SAS2.SYS driver meets the Microsoft specification for miniport
drivers. This driver allows connection of SAS devices including disk drives,
CD/DVD-ROMs, and tape drives for PCI-Express based machines. To support a
different SAS device type, the Windows Server 2008 architecture requires that
a class driver for that type of device be present (usually supplied by
Microsoft, or possibly by the peripheral manufacturer). No changes to the LSI
driver is required. The driver supports only Windows Server 2008 and all
subsequent Service Packs.
A Windows
Hjälp och självstudiekurser för drivrutiner
Fler hämtningar finns på Drivrutiner och hämtningsbara filer. Mer information om hur du använder sidan finns i Hjälp och anvisningar för drivrutiner