Emerson 1100W PSU Firmware Update
Omstart krävs AUTOMATISKT INSTALLERAD Den här filen installerades automatiskt som en del av en ny uppdatering. Om du har problem kan du ladda ner och installera om den manuellt.Innehållet på den här sidan kan ha översatts automatiskt. Fyll i formuläret längst ned på sidan för att ge feedback.
This package provides the Emerson 1100W PSU Firmware Update and is supported on Precision and Enterprise Servers running on the Windows and Linux operating systems.
Rekommenderat
Hitta den bästa nerladdningen för ditt system
Ange din produktinformation för att se den senaste informationen om drivrutiner för ditt systemSök efter support
Ange din Dell service tag eller modell
Vill du söka efter din produkt? Ange en produktidentifierare. Visa mig hur
Den här drivrutinen är inte kompatibel
Den här drivrutinen gäller inte för den valda produkten. Välj en annan produkt för att ange din produktinformation för den här drivrutinen igen eller gå till produktsupportsidan för att visa alla drivrutiner för en annan produkt.
Logga in på Windows som administratör för att använda automatisk skanning. Om du redan är inloggad som administratör och ser det här meddelandet ska du starta om. Ditt system hanteras av IT-administratören och funktionerna kan vara begränsade.
Hitta fler uppdateringar. Använd SupportAssist för att hitta alla de senaste drivrutinsuppdateringarna för din enhet.
Korrigeringar och förbättringar
Fixes
- Eliminated communication error issue
- Eliminated unexpected high speed fan increase.
Enhancements
- Enhanced fan control to improve system startup cooling
Läs mer- Eliminated communication error issue
- Eliminated unexpected high speed fan increase.
Enhancements
- Enhanced fan control to improve system startup cooling
Version
M1.01.0A, A01
Utgivningsdatum
17 maj 2012
Hämtningstyp
Firmware
Kategori
Strömförsörjning
Prioritet
BrådskandeDell Technologies rekommenderar starkt att du installerar den här viktiga uppdateringen så snart som möjligt. Uppdateringen innehåller kritiska buggfixar och ändringar som förbättrar funktionaliteten, pålitligheten och stabiliteten i ditt Dell-system. Den kan även innehålla säkerhetskorrigeringar och andra funktionsförbättringar.
Tillgängliga format Visa viktig information
Filformat: Uppdateringspaket för Microsoft Windows (32-bitars)
Filnamn: Power_Firmware_N3WRV_WN32_M1.01.0A_A01.EXE
Filstorlek: 4.35 MB
Det här är en stor fil. Beroende på din anslutningshastighet kan det ta lite tid att ladda ner den.
Formatbeskrivning:
Dells uppdateringspaket (DUP) i Microsoft Windows 32-bitarsformat har utformats för att köras på 64-bitarsversioner av Microsoft Windows. Dells uppdateringspaket (DUP) i Microsoft Windows 64-bitarsformat kan endast köras på 64-bitarsversioner av Microsoft Windows. När du väljer en uppdatering av en enhetsdrivrutin bör du välja en som passar till ditt operativsystem.
Verifiera kontrollsummans värde så att hämtningen genomförs korrekt.
MD5:
f8212e02aca8dadce60d661adaa580d1
SHA1:
c97010f2f8e3ca325780e50f94556f62bdaaca91
SHA-256:
b064aea48c212c054c3e086b9b6e6820da090db92c229d78ed10a9fd924a99de
Filformat: En GnuPG-fil som innehåller en kryptografisk signatur
Filnamn: Power_Firmware_N3WRV_LN32_M1.01.0A_A01.BIN.sign
Filstorlek: 194 Bytes
Det här är en stor fil. Beroende på din anslutningshastighet kan det ta lite tid att ladda ner den.
Formatbeskrivning:
GnuPG-signaturen för Red Hat Linux-uppdateringspaket kan användas för att autentisera Dells identitet i det korrelerade Red Hat Linux-uppdateringspaketet.
Verifiera kontrollsummans värde så att hämtningen genomförs korrekt.
MD5:
af647786bcceca9a5775d1bc768d51e5
SHA1:
ec37fd1489e4507c78a78f81995f29261e72b777
SHA-256:
08f7d01be2f422cba783936eccd2b5ddc7901676cb329b200953b6b8bf9dc46a
Filformat: Extern versionsinformation
Filnamn: N3WRV external instructions.txt
Filstorlek: 3.54 KB
Det här är en stor fil. Beroende på din anslutningshastighet kan det ta lite tid att ladda ner den.
Formatbeskrivning:
Det här filformatet innehåller oformaterad text som kan visas med en vanlig textredigerare.
Verifiera kontrollsummans värde så att hämtningen genomförs korrekt.
MD5:
686525135cc6fc075bdd98ff3968ef80
SHA1:
ee40f33eb7ab748f93ac0ee702d62d567c30a95d
SHA-256:
Inte tillgänglig
Filformat: Uppdateringspaket för Red Hat Linux
Filnamn: Power_Firmware_N3WRV_LN32_M1.01.0A_A01.BIN
Filstorlek: 2.15 MB
Det här är en stor fil. Beroende på din anslutningshastighet kan det ta lite tid att ladda ner den.
Formatbeskrivning:
Dell Uppdateringspaket för Linux kan användas som en fristående applikation som säkerställer att specifika valideringskriterier uppfylls och sedan utför en uppdatering.
Obs! Uppdateringspaketen för Linux är öppen källkod. Mer information finns i Viktigt-filen Dell Uppdateringspaket för Linux.
Obs! Uppdateringspaketen för Linux är öppen källkod. Mer information finns i Viktigt-filen Dell Uppdateringspaket för Linux.
Verifiera kontrollsummans värde så att hämtningen genomförs korrekt.
MD5:
844d36f36e61252a0a843003fc124e6c
SHA1:
cb658bf0afd8c65ccdfebb655443fbc52f2e6ee6
SHA-256:
6aabf9901144859d26d37108c8d86c06fd9e3ced4c6cf2f85d9b9d2594f97604
I och med att du hämtar accepterar du villkoren i Dells licensavtal för programvara. (på Engelska)
Viktig information
IMPORTANT:
After a successful power supply firmware download, the managed system turns off for a duration ranging from three to twenty minutes to continue updating the firmware. It is imperative not to interrupt/restart manually during this time. Update time can vary but should be approximately 10 minutes. Margin should be added to assure the Dell Update Package (DUP) is not interrupted (some DUPs take up to 20 minutes). Once the firmware update is complete, the managed system reboots automatically.
After a successful power supply firmware download, the managed system turns off for a duration ranging from three to twenty minutes to continue updating the firmware. It is imperative not to interrupt/restart manually during this time. Update time can vary but should be approximately 10 minutes. Margin should be added to assure the Dell Update Package (DUP) is not interrupted (some DUPs take up to 20 minutes). Once the firmware update is complete, the managed system reboots automatically.
Operativsystem som stöds
Ej tillämpligt
Gäller
1100W (1Y45R) PSU
Installationsanvisningar
PSU FIRMWARE UPDATE INSTRUCTIONS:
CAUTION: Performing an AC power cycle or cold boot during a power supply firmware update, forces the power supply unit (PSU) into an irrecoverable state and the managed system does not boot.
IMPORTANT:
After a successful power supply firmware download, the managed system turns off for a duration ranging from three to twenty minutes to continue updating the firmware. It is imperative not to interrupt/restart manually during this time. Update time can vary but should be approximately 10 minutes. Margin should be added to assure the Dell Update Package (DUP) is not interrupted (some DUPs take up to 20 minutes). Once the firmware update is complete, the managed system reboots automatically.
Instructions for Power_Firmware_N3WRV_LN32_M1.01.0A_A01.BIN:
Download
1. Click the "Download File" link to download the file.
2. When the "File Download" window appears, click "Save" to save the file to your hard drive.
Installation
1. Read the release information presented by executing the ./Power_Firmware_N3WRV_LN32_M1.01.0A_A01.BIN --version command from the shell.
2. Download and install any prerequisites identified in the above step before proceeding.
3. Run the update by executing ./Power_Firmware_N3WRV_LN32_M1.01.0A_A01.BIN from the shell.
4. Follow the remaining prompts to perform the update.
5. Upon successful completion the DUP will prompt to reboot system.
6. Restart your system.
After the system restarts, DUP will enter USC to complete the flashing of the PSU firmware.
7. The actual flash begins after DUP exits USC. Please do not power off or power cycle the system as this can result in a non-functional power supply.
8. Once the flashing process is complete the system should power back up and boot to OS.
Instructions for Power_Firmware_N3WRV_WN32_M1.01.0A_A01.EXE:
Download
1. Click the "Download File" link to download the file.
2. When the "File Download" window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.
6. Upon successful completion the DUP will prompt to reboot system.
7. Restart your system.
After the system restarts, DUP will enter USC to complete the flashing of the PSU firmware.
8. The actual flash begins after DUP exits USC. Please do not power off or power cycle the system as this can result in a non-functional power supply.
9. Once the flashing process is complete the system should power back up and boot to OS.
GnuPG Signature of Dell Update Package Instructions for Power_Firmware_N3WRV_LN32_M1.01.0A_A01.BIN.sign:
Download
1. Click the "Download File" link to download the file.
2. When the "File Download" window appears, click "Save" to save the file to your hard drive.
Installation
1. Import the Dell public key. (You only need to import once on your system.)
2. Verify the Dell Update Package by using its signature file, Power_Firmware_N3WRV_LN32_M1.01.0A_A01.BIN.sign
3. Upon successful completion the DUP will prompt to reboot system.
4. Restart your system.
After the system restarts, DUP will enter USC to complete the flashing of the PSU firmware.
5. The actual flash begins after DUP exits USC. Please do not power off or power cycle the system as this can result in a non-functional power supply.
6. Once the flashing process is complete the system should power back up and boot to OS.
CAUTION: Performing an AC power cycle or cold boot during a power supply firmware update, forces the power supply unit (PSU) into an irrecoverable state and the managed system does not boot.
IMPORTANT:
After a successful power supply firmware download, the managed system turns off for a duration ranging from three to twenty minutes to continue updating the firmware. It is imperative not to interrupt/restart manually during this time. Update time can vary but should be approximately 10 minutes. Margin should be added to assure the Dell Update Package (DUP) is not interrupted (some DUPs take up to 20 minutes). Once the firmware update is complete, the managed system reboots automatically.
Instructions for Power_Firmware_N3WRV_LN32_M1.01.0A_A01.BIN:
Download
1. Click the "Download File" link to download the file.
2. When the "File Download" window appears, click "Save" to save the file to your hard drive.
Installation
1. Read the release information presented by executing the ./Power_Firmware_N3WRV_LN32_M1.01.0A_A01.BIN --version command from the shell.
2. Download and install any prerequisites identified in the above step before proceeding.
3. Run the update by executing ./Power_Firmware_N3WRV_LN32_M1.01.0A_A01.BIN from the shell.
4. Follow the remaining prompts to perform the update.
5. Upon successful completion the DUP will prompt to reboot system.
6. Restart your system.
After the system restarts, DUP will enter USC to complete the flashing of the PSU firmware.
7. The actual flash begins after DUP exits USC. Please do not power off or power cycle the system as this can result in a non-functional power supply.
8. Once the flashing process is complete the system should power back up and boot to OS.
Instructions for Power_Firmware_N3WRV_WN32_M1.01.0A_A01.EXE:
Download
1. Click the "Download File" link to download the file.
2. When the "File Download" window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.
6. Upon successful completion the DUP will prompt to reboot system.
7. Restart your system.
After the system restarts, DUP will enter USC to complete the flashing of the PSU firmware.
8. The actual flash begins after DUP exits USC. Please do not power off or power cycle the system as this can result in a non-functional power supply.
9. Once the flashing process is complete the system should power back up and boot to OS.
GnuPG Signature of Dell Update Package Instructions for Power_Firmware_N3WRV_LN32_M1.01.0A_A01.BIN.sign:
Download
1. Click the "Download File" link to download the file.
2. When the "File Download" window appears, click "Save" to save the file to your hard drive.
Installation
1. Import the Dell public key. (You only need to import once on your system.)
2. Verify the Dell Update Package by using its signature file, Power_Firmware_N3WRV_LN32_M1.01.0A_A01.BIN.sign
3. Upon successful completion the DUP will prompt to reboot system.
4. Restart your system.
After the system restarts, DUP will enter USC to complete the flashing of the PSU firmware.
5. The actual flash begins after DUP exits USC. Please do not power off or power cycle the system as this can result in a non-functional power supply.
6. Once the flashing process is complete the system should power back up and boot to OS.
Hjälp och självstudiekurser för drivrutiner
Fler hämtningar finns på Drivrutiner och hämtningsbara filer. Mer information om hur du använder sidan finns i Hjälp och anvisningar för drivrutiner