Samsung P80P Plus 40GB Lead Free PATA HDD, P80P Plus 80GB Lead Free PATA HDD, v.TK300-09, A01
AUTOMATISKT INSTALLERADDen här filen installerades automatiskt som en del av en ny uppdatering. Om du har problem kan du ladda ner och installera om den manuellt.
Innehållet på den här sidan kan ha översatts automatiskt. Fyll i formuläret längst ned på sidan för att ge feedback.
Den här filen installerades automatiskt som en del av en ny uppdatering. Om du har problem kan du ladda ner och installera om den manuellt.
For Bootable Diskette:
* PLEASE PRINT THE FOLLOWING INSTRUCTIONS *
1. Click on the (BR139989.EXE) file and select "RUN" then "RUN" again. 2. Choose "Continue" in the next window to create a bootable floppy. 3. Close all applications, and re-boot from the floppy image just created. 4. The Samsung Sflash utility will start automatically. 5. The utility will only update the models listed above in this release. 6. The application will report "Updated Successfully". 7. Once completed you will be left at an "A:\>". 8. Remove the floppy diskette and power off your system. 9. Restart your system.
Alternative Flash process (no floppy available)
(PLEASE MAKE SURE A/C POWER IS BEING USED WHILE UPDATING YOUR HARD DRIVE)
1. The files contained in (R139989.EXE) should be extracted to bootable media. (ie. Floppy, CD, Zip drive, USB Flash Memory). The default extraction directory is C:\DELL\DRIVERS\R139989.EXE. 2. Once the files are extracted, copy the contents of C:\DELL\DRIVERS\R139989.EXE\FILES directory to bootable source. Boot to that source. 3. The Samsung Sflash utility will start automatically. 4. The utility will only update the models listed above in this release. 5. The application will report "Updated Successfully". 6. Once completed you will be left at a DOS prompt. 7. Remove the bootable media and power off your system. 8. Restart your system.
Rekommenderat
Hitta den bästa nerladdningen för ditt system
Ange din produktinformation för att se den senaste informationen om drivrutiner för ditt system
Sök efter support
Ange din Dell service tag eller modell
Vill du söka efter din produkt? Ange en produktidentifierare.Visa mig hur
Inga resultat hittades. Vi kunde inte hitta något som matchade din sökning. Ändra din sökning och försök igen.
Den här drivrutinen är inte kompatibel
Den här drivrutinen gäller inte för den valda produkten. Välj en annan produkt för att ange din produktinformation för den här drivrutinen igen eller gå till produktsupportsidan för att visa alla drivrutiner för en annan produkt.
Logga in på Windows som administratör för att använda automatisk skanning. Om du redan är inloggad som administratör och ser det här meddelandet ska du starta om.Ditt system hanteras av IT-administratören och funktionerna kan vara begränsade.
Hitta fler uppdateringar. Använd SupportAssist för att hitta alla de senaste drivrutinsuppdateringarna för din enhet.
Korrigeringar och förbättringar
This update corrects an issue where MS Windows 2000/XP can inadvertently decrease performance due to an internal setting on the hard drive.
Dell Technologies rekommenderar att du installerar den här uppdateringen under nästa schemalagda uppdateringscykel. Uppdateringen innehåller ändringar för att bibehålla det allmänna systemtillståndet. Den säkerställer att systemets programvara förblir aktuell och kompatibel med andra systemmoduler (fast programvara, BIOS, drivrutiner och programvara) och kan inkludera andra nya funktioner.
Det här är en stor fil. Beroende på din anslutningshastighet kan det ta lite tid att ladda ner den.
Formatbeskrivning:
Den här filen innehåller en komprimerad (eller zippad) uppsättning filer. Hämta filen till en mapp på hårddisken och kör sedan filen (dubbelklicka på den) för att packa upp filerna. Följ anvisningarna för att slutföra installationen.
Verifiera kontrollsummans värde så att hämtningen genomförs korrekt.
MD5:
3f300ca50f9c80a17d3d42a6fba547bf
SHA1:
Inte tillgänglig
SHA-256:
Inte tillgänglig
Filformat:En eller flera självuppackande diskimageuppsättningar inuti en självuppackande ZIP-fil
Filnamn:BR139989.exe
Filstorlek:1.14 MB
Det här är en stor fil. Beroende på din anslutningshastighet kan det ta lite tid att ladda ner den.
Formatbeskrivning:
Den här filen innehåller en komprimerad (eller zippad) uppsättning filer. Hämta filen till en mapp på hårddisken och dubbelklicka sedan på den för att packa upp filerna. Följ anvisningarna för att slutföra installationen.
(PLEASE MAKE SURE A/C POWER IS BEING USED WHILE UPDATING YOUR HARD DRIVE)
1. The files contained in (R139989.EXE) should be extracted to bootable media. (ie. Floppy, CD, Zip drive, USB Flash Memory). The default extraction directory is C:\DELL\DRIVERS\R139989.EXE. 2. Once the files are extracted, copy the contents of C:\DELL\DRIVERS\R139989.EXE\FILES directory to bootable source. Boot to that source. 3. The Samsung Sflash utility will start automatically. 4. The utility will only update the models listed above in this release. 5. The application will report "Updated Successfully". 6. Once completed you will be left at a DOS prompt. 7. Remove the bootable media and power off your system. 8. Restart your system. Floppy Disk Boot to Disk for BR139989.exe
Download
1. Click Download Now, to download the file. 2. When the File Download window appears, click Save (Windows XP users will click Save) this program to disk and click OK. The Save In: window appears. 3. From the Save In: field, click the down arrow then click to select Desktop and click Save. The file will download to your desktop. 4. If the Download Complete window appears, click Close. The file icon appears on your desktop.
Hard Drive Floppy Disk Creation
1. Get 1 blank, formatted floppy disks. 2. Double-click the new icon (it looks like a floppy diskette) on the desktop. The Self-Extractor window appears. 3. Click Setup. An black MS-DOS window appears with a message indicating that you need 1 floppy diskettes. 4. Press the [ENTER] key. A message appears prompting you to insert a blank floppy diskette. 5. Insert a floppy disk into the floppy disk drive. 6. Press the [ENTER] key. A message appears indicating that all data on the disk will be erased. 7. Press the [y] key and then press the [ENTER] key. The files are copied to the floppy diskette. If the procedure requires more than one diskette, repeat steps 5 – 7 until you reach the end of the diskette set. 8. After all the files have been copied to the last floppy disk, press the [ENTER] key and the MS-DOS window closes.
Install
1. Insert the first (or the only) disk of the set into the Floppy drive. 2. Click Start, click Shutdown, click Restart, and then click OK. Windows XP Users need only click restart. 3. Follow the on-screen instructions.