Dell MD36XXi iSCSI RAID Controller, v.CFW 07.80.41.60 and NVSRAM N26X0-780890-901, A04
AUTOMATISKT INSTALLERAD Den här filen installerades automatiskt som en del av en ny uppdatering. Om du har problem kan du ladda ner och installera om den manuellt.Innehållet på den här sidan kan ha översatts automatiskt. Fyll i formuläret längst ned på sidan för att ge feedback.
MD36x0i (iSCSI) series Controller Firmware and NVSRAM
Rekommenderat
Hitta den bästa nerladdningen för ditt system
Ange din produktinformation för att se den senaste informationen om drivrutiner för ditt systemSök efter support
Ange din Dell service tag eller modell
Vill du söka efter din produkt? Ange en produktidentifierare. Visa mig hur
Den här drivrutinen är inte kompatibel
Den här drivrutinen gäller inte för den valda produkten. Välj en annan produkt för att ange din produktinformation för den här drivrutinen igen eller gå till produktsupportsidan för att visa alla drivrutiner för en annan produkt.
Logga in på Windows som administratör för att använda automatisk skanning. Om du redan är inloggad som administratör och ser det här meddelandet ska du starta om. Ditt system hanteras av IT-administratören och funktionerna kan vara begränsade.
Hitta fler uppdateringar. Använd SupportAssist för att hitta alla de senaste drivrutinsuppdateringarna för din enhet.
Korrigeringar och förbättringar
This release of the RAID controller firmware 07.80.41.60 adds the following new features:
* Support for larger than 2TB physical disks.
* Support for up to 192 physical disks.
--- By default, the storage arrays support up to 120 physical disks.
--- The support for more than 120 physical disks is offered through a premium feature option.
* Snapshot rollback.
* Snapshot scheduler.
* Simple performance monitor.
* MD Storage Manager operation completion progress indicator for prolonged operations.
* Support for 16 snapshots per LUN with a total of 256 snapshots per storage array.
* Support for 512 virtual disks.
--- Note: The actual number of virtual disks which a single host can access depends on the host operating system and cannot exceed 256 virtual disks per host.
* Added support for the following operating systems:
--- Microsoft Windows Server 2008 R2 SP1
--- Red Hat Enterprise Linux 5.6
--- Red Hat Enterprise Linux 5.7
--- Red Hat Enterprise Linux 6.1
------ Note: Red Hat Enterprise Linux 6.0 is not supported.
--- SUSE Linux Enterprise Server 10 SP4
--- VMware ESX 4.1 Update 1
--- VMware ESXi 5
=====================================================
Previous Releases
=====================================================
Fixes for CFW 07.75.28.60 and NVSRAM N26X0-775890-909
=====================================================
- Code fix to resolve a BBU learn cycle issue.
- Code fix to resolve a lockdown/panic situation caused by conflicting iSCSI initiator record in memory and that in persistent controller database.
- Code fix to resolve an incorrect display of management port IP address if management network cable is reseated during controller(s) boot up.
- Code fix to resolve a possible occurrence of invalid management port IP address if a change of management port from static IP to DHCP was enabled.
- Code fix to display complete diagnostic information on management port in the support bundle.
Fixes for CFW 07.75.14.62 and NVSRAM N26X0-775890-909
=====================================================
- Remedy for low probability I/O path issue
Fixes for CFW 07.75.14.61 and NVSRAM N26X0-775890-909
=====================================================
- Added fix to prevent false cache backup device errors
Fixes for CFW 07.75.14.60 and NVSRAM N26X0-775890-909
=====================================================
- Addressed “Automatic Simplex Downgrade” behaviors during service events
- Resolved “Unresolved ITA in the Database” message in the support logs
Läs mer* Support for larger than 2TB physical disks.
* Support for up to 192 physical disks.
--- By default, the storage arrays support up to 120 physical disks.
--- The support for more than 120 physical disks is offered through a premium feature option.
* Snapshot rollback.
* Snapshot scheduler.
* Simple performance monitor.
* MD Storage Manager operation completion progress indicator for prolonged operations.
* Support for 16 snapshots per LUN with a total of 256 snapshots per storage array.
* Support for 512 virtual disks.
--- Note: The actual number of virtual disks which a single host can access depends on the host operating system and cannot exceed 256 virtual disks per host.
* Added support for the following operating systems:
--- Microsoft Windows Server 2008 R2 SP1
--- Red Hat Enterprise Linux 5.6
--- Red Hat Enterprise Linux 5.7
--- Red Hat Enterprise Linux 6.1
------ Note: Red Hat Enterprise Linux 6.0 is not supported.
--- SUSE Linux Enterprise Server 10 SP4
--- VMware ESX 4.1 Update 1
--- VMware ESXi 5
=====================================================
Previous Releases
=====================================================
Fixes for CFW 07.75.28.60 and NVSRAM N26X0-775890-909
=====================================================
- Code fix to resolve a BBU learn cycle issue.
- Code fix to resolve a lockdown/panic situation caused by conflicting iSCSI initiator record in memory and that in persistent controller database.
- Code fix to resolve an incorrect display of management port IP address if management network cable is reseated during controller(s) boot up.
- Code fix to resolve a possible occurrence of invalid management port IP address if a change of management port from static IP to DHCP was enabled.
- Code fix to display complete diagnostic information on management port in the support bundle.
Fixes for CFW 07.75.14.62 and NVSRAM N26X0-775890-909
=====================================================
- Remedy for low probability I/O path issue
Fixes for CFW 07.75.14.61 and NVSRAM N26X0-775890-909
=====================================================
- Added fix to prevent false cache backup device errors
Fixes for CFW 07.75.14.60 and NVSRAM N26X0-775890-909
=====================================================
- Addressed “Automatic Simplex Downgrade” behaviors during service events
- Resolved “Unresolved ITA in the Database” message in the support logs
Version
CFW 07.80.41.60 and NVSRAM N26X0-780890-901, A04
Utgivningsdatum
26 sep. 2011
Hämtningstyp
Firmware
Kategori
iSCSI RAID
Prioritet
RekommenderasDell Technologies rekommenderar att du installerar den här uppdateringen under nästa schemalagda uppdateringscykel. Uppdateringen innehåller ändringar för att bibehålla det allmänna systemtillståndet. Den säkerställer att systemets programvara förblir aktuell och kompatibel med andra systemmoduler (fast programvara, BIOS, drivrutiner och programvara) och kan inkludera andra nya funktioner.
Tillgängliga format
Filformat: Extraherar filer direkt till en lokal disk
Filnamn: Dell_MD36xxi_CFW_07804160_A04_R315137.zip
Filstorlek: 53.04 MB
Det här är en stor fil. Beroende på din anslutningshastighet kan det ta lite tid att ladda ner den.
Formatbeskrivning:
Det här filformatet består av ett arkiv av filer som kan packas upp i en katalog på hårddisken. Installationen kan sedan göras från den katalogen.
Verifiera kontrollsummans värde så att hämtningen genomförs korrekt.
MD5:
48ae25f5f51ba712128230b6696e02d2
SHA1:
Inte tillgänglig
SHA-256:
Inte tillgänglig
I och med att du hämtar accepterar du villkoren i Dells licensavtal för programvara. (på Engelska)
Operativsystem som stöds
Novell SuSE Linux ES 11
Windows Server 2008 x64
Suse Linux ES 10
Red Hat® Enterprise Linux 6
Red Hat® Enterprise Linux 5
Windows 7, 32-bit
Windows 7, 64-bit
Windows Vista, 32-bit
Windows Server 2008 x86
Windows Server 2003
Windows Server 2008 R2
MS Windows Vista 64-bitars
Windows XP
Windows Server 2003 x64
Installationsanvisningar
Custom Instructions for Dell_MD36xxi_CFW_07804160_A04_R315137.zip:
ATTENTION: This firmware package requires Dell PowerVault MD Series Storage Software Resource DVD version 3.0.0.18 or higher to be installed prior to the RAID controller firmware update.
======================================================================
Firmware Upgrade Instructions
======================================================================
IMPORTANT: It is highly recommended to gather support information from the "Support" tab of the MD Storage Manager prior to performing any firmware upgrade operations. This can also be achieved through the SMcli using the 'save storageArray supportData file="filename"' command.
If your PowerVault MD3200/MD3600 series storage array is currently running firmware version 07.70.xx.xx or 07.75.xx.xx, you cannot directly install the RAID controller firmware update version 07.80.xx.xx included in this release.
Instead, you must first install bridge firmware version 07.75.28.60. After the bridge firmware is successfully installed, you can then install RAID controller firmware 07.80.xx.xx.
Specifically, follow these steps:
1. Download and activate RAID controller bridge firmware version 07.75.28.60.
2. Wait until the bridge firmware installation is completed successfully.
3. Wait at least thirty minutes to allow the attached hosts to re-discover the storage array.
4. Download and activate the RAID controller firmware version 07.80.xx.xx and the NVSRAM configuration file version N26X0-780890-x01.
*** WARNING ***
If you have a single controller PowerVault MD3200/MD3600 series storage array you must stop all I/O operations before starting the firmware upgrade.
======================================================
Upgrading RAID Controller Firmware Using MD Storage Manager
======================================================
1. Launch Dell Modular Disk Storage Manager
2. Select your storage array from the drop down box in the upper left hand corner.
3. Click the Support tab
4. Click "Download Firmware"
If upgrading both the RAID Controller firmware and the NVSRAM:
5. Click "Download RAID Controller Module Firmware"
6. Click "Select File". Choose the RAID Controller Firmware file from the directory that you extracted it to. Click OK.
7. Select "Transfer NVSRAM file with RAID controller module firmware".
8. Click "Select File". Choose the RAID controller module NVSRAM file from the directory that you extracted it in. Click OK.
9. Click "Transfer" to initiate the upgrade.
If upgrading only the RAID Controller firmware:
5. Click "Download RAID Controller Module Firmware"
6. Click "Select File". Choose the RAID Controller Firmware file from the directory that you extracted it to. Click OK.
7. Click "Transfer" to initiate the upgrade.
If upgrading only the NVSRAM:
5. Click "Download RAID Controller Module NVSRAM"
6. Click "Select File". Choose the RAID Controller NVSRAM file from the directory that you extracted it to. Click OK.
7. Click "Transfer" to initiate the upgrade.
ATTENTION: This firmware package requires Dell PowerVault MD Series Storage Software Resource DVD version 3.0.0.18 or higher to be installed prior to the RAID controller firmware update.
======================================================================
Firmware Upgrade Instructions
======================================================================
IMPORTANT: It is highly recommended to gather support information from the "Support" tab of the MD Storage Manager prior to performing any firmware upgrade operations. This can also be achieved through the SMcli using the 'save storageArray supportData file="filename"' command.
If your PowerVault MD3200/MD3600 series storage array is currently running firmware version 07.70.xx.xx or 07.75.xx.xx, you cannot directly install the RAID controller firmware update version 07.80.xx.xx included in this release.
Instead, you must first install bridge firmware version 07.75.28.60. After the bridge firmware is successfully installed, you can then install RAID controller firmware 07.80.xx.xx.
Specifically, follow these steps:
1. Download and activate RAID controller bridge firmware version 07.75.28.60.
2. Wait until the bridge firmware installation is completed successfully.
3. Wait at least thirty minutes to allow the attached hosts to re-discover the storage array.
4. Download and activate the RAID controller firmware version 07.80.xx.xx and the NVSRAM configuration file version N26X0-780890-x01.
*** WARNING ***
If you have a single controller PowerVault MD3200/MD3600 series storage array you must stop all I/O operations before starting the firmware upgrade.
======================================================
Upgrading RAID Controller Firmware Using MD Storage Manager
======================================================
1. Launch Dell Modular Disk Storage Manager
2. Select your storage array from the drop down box in the upper left hand corner.
3. Click the Support tab
4. Click "Download Firmware"
If upgrading both the RAID Controller firmware and the NVSRAM:
5. Click "Download RAID Controller Module Firmware"
6. Click "Select File". Choose the RAID Controller Firmware file from the directory that you extracted it to. Click OK.
7. Select "Transfer NVSRAM file with RAID controller module firmware".
8. Click "Select File". Choose the RAID controller module NVSRAM file from the directory that you extracted it in. Click OK.
9. Click "Transfer" to initiate the upgrade.
If upgrading only the RAID Controller firmware:
5. Click "Download RAID Controller Module Firmware"
6. Click "Select File". Choose the RAID Controller Firmware file from the directory that you extracted it to. Click OK.
7. Click "Transfer" to initiate the upgrade.
If upgrading only the NVSRAM:
5. Click "Download RAID Controller Module NVSRAM"
6. Click "Select File". Choose the RAID Controller NVSRAM file from the directory that you extracted it to. Click OK.
7. Click "Transfer" to initiate the upgrade.
Hjälp och självstudiekurser för drivrutiner
Fler hämtningar finns på Drivrutiner och hämtningsbara filer. Mer information om hur du använder sidan finns i Hjälp och anvisningar för drivrutiner