Seagate Barracuda ST3500620AS 500GB LF S2 HDD Firmware Update

Omstart krävs AUTOMATISKT INSTALLERAD Den här filen installerades automatiskt som en del av en ny uppdatering. Om du har problem kan du ladda ner och installera om den manuellt.
Innehållet på den här sidan kan ha översatts automatiskt. Fyll i formuläret längst ned på sidan för att ge feedback.
This package provides the Windows based Seagate Barracuda ST3500620AS 500GB LF S2 HDD Firmware Update and is supported on the Precision T3500/T5500/390/T7500, Vostro Desktop 200 and OptiPlex 960 that are running the following Windows Operating Systems: XP and Vista.
Rekommenderat

Hitta den bästa nerladdningen för ditt system

Ange din produktinformation för att se den senaste informationen om drivrutiner för ditt system

Sök efter support

Ange din Dell service tag eller modell

Vill du söka efter din produkt? Ange en produktidentifierare. Visa mig hur

Den här drivrutinen är inte kompatibel

Den här drivrutinen gäller inte för den valda produkten. Välj en annan produkt för att ange din produktinformation för den här drivrutinen igen eller gå till produktsupportsidan för att visa alla drivrutiner för en annan produkt.

Hitta fler uppdateringar. Använd SupportAssist för att hitta alla de senaste drivrutinsuppdateringarna för din enhet.

Korrigeringar och förbättringar

Fixes
- Not Applicable

Enhancements
- Enhanced performance and reliability
Läs mer

Version

DE13, A01

Utgivningsdatum

06 mars 2012

Hämtningstyp

Maskinvara

Kategori

Lagring

Prioritet

Kritisk
Dell Technologies rekommenderar starkt att du installerar den här viktiga uppdateringen så snart som möjligt. Uppdateringen innehåller kritiska buggfixar och ändringar som förbättrar funktionaliteten, pålitligheten och stabiliteten i ditt Dell-system. Den kan även innehålla säkerhetskorrigeringar och andra funktionsförbättringar.
Tillgängliga format Visa viktig information

Filformat: Extern ZipPack
Filnamn: R213715.exe
Filstorlek: 2.32 MB
Det här är en stor fil. Beroende på din anslutningshastighet kan det ta lite tid att ladda ner den.
Formatbeskrivning:
Den här filen innehåller en komprimerad (eller zippad) uppsättning filer. Hämta filen till en mapp på hårddisken och kör sedan filen (dubbelklicka på den) för att packa upp filerna. Följ anvisningarna för att slutföra installationen.
Verifiera kontrollsummans värde så att hämtningen genomförs korrekt.
MD5:
6f138e7ee081fa3c710514b43bd25ae4
SHA1:
20132b72c39084d3f35381e3f1bbd0ffb90942e4
SHA-256:
Inte tillgänglig

Filformat: En eller flera självuppackande diskimageuppsättningar inuti en självuppackande ZIP-fil
Filnamn: BR213715.exe
Filstorlek: 1.03 MB
Det här är en stor fil. Beroende på din anslutningshastighet kan det ta lite tid att ladda ner den.
Formatbeskrivning:
Den här filen innehåller en komprimerad (eller zippad) uppsättning filer. Hämta filen till en mapp på hårddisken och dubbelklicka sedan på den för att packa upp filerna. Följ anvisningarna för att slutföra installationen.
Verifiera kontrollsummans värde så att hämtningen genomförs korrekt.
MD5:
4a410001b9b0c9b12dffb0620e5b4251
SHA1:
Inte tillgänglig
SHA-256:
Inte tillgänglig

I och med att du hämtar accepterar du villkoren i Dells licensavtal för programvara. (på Engelska)

Ytterligare information

Visa alla | Dölj alla
1. Please do not interrupt the firmware update sequence.
ST3500620AS 500GB LF S2 HDD
Hard Drive Installation (via WinZip) with Setup.exe File

Download
1. Click Download File, to download the file.
2. When the File Download window appears, click Save or Save this program to disk and click OK. The Save In: window appears.
3. From the Save In: field, click the down arrow then click to select Desktop and click Save. The file will download to your desktop.
4. If the Download Complete window appears, click Close. The file icon appears on your desktop.

Install
1. Double-click the new icon on the desktop.
2. The Self-Extracting window appears and prompts you to extract or unzip to "C:\DELL\DRIVERS\TMCVP". (Where 'TMCVP' is the name of the file to be downloaded). Write down this path so the executable (I.e.Setup.exe) file can be found later.
3. The Self-Extractor window appears.
4. Click OK.
5. After completing the file extraction, if the Self-Extractor window is still open, close it.
6. Click Start button and then click Run.
7. Type "C:\DELL\DRIVERS\TMCVP" (where 'TMCVP' isthe name of the file) in the Open textbox and then click OK.
8. Follow the on-screen installation instructions.

PLEASE PRINT THE FOLLOWING INSTRUCTIONS *
* Please note that if your drive is connected to an add-in or onboard controller designated for SAS (Serial Attached SCSI) then you will need to connect your drives to the onboard SATA controller to perform the update. *

(PLEASE DON'T INTERRUPT THE FIRMWARE UPDATE PROCESS)
For Bootable Diskette:

1. Perform a full backup of your data.
2. Click on the (BR213715.EXE) file and select "RUN" then "RUN" again.
3. Choose "Continue" in the next window to create a bootable floppy.
4. Close all applications and restart system.
5. Press F12 and insert the floppy disk containing the firmware update.
6. Select boot from Floppy.
7. The Seagate Firmware Update will start automatically.
8. The utility will autoscan and update the appropiate Seagate ST3500620AS.
9. Once completed, a message indicating process completion will appear.
10. Remove the floppy diskette and power off your system.
11. Power on your system to continue normal operation.

For Bootable CD option

1. Perform a full backup of your data.
2. Click on the (R213715.EXE) file and select "RUN" then "RUN" again.
3. Press "Continue" then "OK" to extract the files to the provided location.
4. Refer to your CD burning application instructions to create a bootable CD using the provided file "C:\DELL\Drivers\R213715\CD Image\Seagate Utility.ISO".
5. Restart your system.
6. Press F12 and insert the CD containing the firmware update.
7. Select boot from CD/DVD.
8. The Seagate utility will start automatically.
9. The utility will autoscan and update the appropiate Seagate ST3500620AS.
10. Once completed, a message indicating process completion will appear.
11. Remove the CD and power off your PC.
12. Power on your PC to continue normal operation.

For Bootable USB key option

1. Perform a full backup of your data.
2. Click on the (R213715.EXE) file and select "RUN" then "RUN" again.
3. Press "Continue" then "OK" to extract the files to the provided location.
4. The files are located in "C:\DELL\Drivers\R213715\Files" directory.
5. Add the files to your bootable USB key.
6. Restart your system.
7. Insert your USB key containing the firmware update.
8. Press F12 and choose boot from USB
9. The Seagate utility will start automatically.
10. The utility will autoscan and update the appropiate Seagate ST3500620AS.
11. Once completed, a message indicating process completion will appear.
12. Remove the Bootable Media and power off your system.

Hjälp och självstudiekurser för drivrutiner